• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.7
• /
• pp.479-486
• /
• 2013

The data model that can be said as skeleton of the information system constitutes important 2 axles in the information system together with the process model. There is entity, properties, relation as key factors of the data model, and entity is the most fundamental factor in the data model, and thus total data model becomes vague if not deriving entity definitely. This study dealt with entity deduction only. Deducing methods of existing entity depended on experiences, task knowledge of designers and clear procedures were not suggested, so there were many difficulties in approaching them from beginners or unskilled persons. For giving helps in solving the problem, this study proposes entity- deducing procedures based on tasks that can derive entity with a systematic process at previously derived target businesses through suggested methods from advancing researches. And the study enabled proposing procedures on imaginary tasks to be applied, objecting to undergraduates who had not experiences on the data modeling, and then verified suggesting process through a similarity checking between best answers with deduced entity by students after taking impossible points of comparing existing methods with suggesting process into consideration. By doing so, deducing entity closely to the best answer was confirmed accordingly. Therefore, a fact could be confirmed that beginners were able to deduce entity closely to the best answer even if letting beginners who had not experiences on the data modeling be applied to unfamiliar tasks. Regarding researches on properties and relation deduction besides entity, this study leaves them to next time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.152-162
• /
• 1991

A three-dimensional numerical model with free water surface was established to investigate flow characteristics of surface buoyant jets and river plumes. Turbulent shear stresses and turbulent buoyancy fluxes were expressed in terms of the eddy viscosities and diffusivities. Stable stratification effects due to density difference between discharged water and receiving ambient water were taken into with empirical formulae. Through a comparison of numerical results with published experimental data the validity of the model was shown and the optimal stratification functions was determined The three-dimensional spreading characteristics were examined and the effects of inlet densimetric Froude number, inlet aspect ratio and water surface elevation on the flow development were discussed.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.69-82
• /
• 1999

Direct shear tests are perfromed for artifical joint models made of cement with 25 types of different strength and roughness. The tests consist of the multi-stage test which is a common test method for a single joint plane and the test method suggested by ISRM. Then, not only the differences of friction angles between the two test methods are compared, but is the effectiveness of the multi-stage test investigated. The average of friction angles measured from the multi-stage test is $6.4^{\circ}$ lower than that from the ISRM test. Although the strength and roughness of samples vary, the differences of friction angles between the two test methods are constant. The relationship between the shear stress and the normal stress measured from the multi-stage test is well correlate with the Patton's equation. Whereas, the Barton's equation is best fitted with those measured from ISRM test.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.11
• /
• pp.411-418
• /
• 2018

With the proliferation of artificial intelligence technology, it is becoming important to obtain, store, and utilize scientific data in research and science sectors. A number of methods for extracting meaningful objects such as graphs and tables from research articles have been proposed to eventually obtain scientific data. Existing extraction methods using heuristic approaches are hardly applicable to electronic documents having heterogeneous manuscript formats because they are designed to work properly for some targeted manuscripts. This paper proposes a prototype of an object extraction system which exploits a recent deep-learning technology so as to overcome the inflexibility of the heuristic approaches. We implemented our trained model, based on the Faster R-CNN algorithm, using the Google TensorFlow Object Detection API and also composed an annotated data set from 100 research articles for training and evaluation. Finally, a performance evaluation shows that the proposed system outperforms a comparator adopting heuristic approaches by 5.2%.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.31-36
• /
• 2019

Music therapy, a field that convergence music and treatment, which play a fundamental role in personality formation, possesses diverse and complex treatment methods. Music therapists in charge of music therapy may experience the same phenomenon as countertransference in consultation with clients. In addition, experiencing psychological burnout, there are many difficulties in reaching the final goal of music therapy. In this paper, we provide a collaborative filtering-based music therapy consultation data recommendation model for smooth music therapy consultation with clients who visited for music therapy. The proposed model grasps the similarity between the conventional consultation data and the new consultant data through the euclidean distance algorithm. This is to recommend similar consultation materials. Since music therapists can provide optimal consultation materials for consultants who need music therapy, smooth consultation is expected.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.661-663
• /
• 2022

이 논문에서는 변형 가능한 햅틱 컨트롤러와 포스 피드백 장치를 이용한 치과 수술 시뮬레이션 시스템을 제안한다. 이 시스템은 가상 환경에서 매복 사랑니 발치 수술을 수행하도록 설계되었다. 햅틱 하드웨어들은 신체와 수술도구의 상대적 위치를 계산하여 충돌여부를 파악하고 저항감과 진동감을 제공한다. 특히 길이 변화, 굽힘 발생과 같은 변형이 가능한 햅틱 컨트롤러는 사용하는 수술도구에 따라 느껴지는 촉감을 표현할 수 있다. 정교한 3 차원 모델로 구강내부와 치과용 수술도구를 표현한 후 햅틱 컨트롤러의 움직임과 버튼 클릭 등의 입력 값을 전달하는 모듈을 통해 가상 객체와 상호 작용하고 이에 대한 햅틱 피드백을 컨트롤러로 전달하여 사용자에게 현실적인 수술 경험을 제공한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.401-401
• /
• 2020

최근 전 세계적으로 기후변화로 인한 자연재해가 빈번하게 발생하고 있으며, 우리나라 역시 해마다 가뭄과 홍수 등의 피해가 큰 실정이다. 특히 가뭄으로 인한 피해는 농업분야와 직결되어 있으며, 미래식량과 물안보에 영향을 미친다. 최근에는 국내 물관리일원화 정책에 따른 통합물관리 시행으로 수요관리에 의한 물이용 효율성이 물관리 기본원칙으로 포함되어 있어, 농업용수 분야의 물절약 필요성과 중요성은 더욱 증대되고 있는 실정이다. 농업농촌부문 가뭄대응 종합대책의 일환으로 2016년부터 농업용수 이용자 측면에서 물절약 실천을 유도하기 위한 물절약 교육 모델의 개발과 농업인 대상 시범교육이 실시되고 있으나 일부 지역에만 단발성 사업으로 제한적으로 추진되고 있는 실정이다. 따라서 물절약 교육 및 홍보사업을 보다 체계적이고 광법위하게 적용하여 농업 현장에서의 가시적인 물절약 성과를 도출하기 위한 노력이 요구된다. 이에 대한 일환으로 본 연구에서는 물절약 교육 콘텐트 개발 및 현장 교육에 반영하기 위하여 농업인 대상 물절약 의식과 행동실천 여부에 대해 조사를 실시해 보았다. 포항 및 영덕지역의 한국농어촌공사 관할지구 내 농업용수 이용자 중 수리시설감시원(이하 '수감원') 100여명을 대상으로 설문조사로 파악해 보았다. 설문에 참여한 수감원들은 대부분 65세 이상의 고령으로 농업에 오랜 기간 종사한 경험의 소유자로서 소규모 농업경영이 주를 이루었다. 대부분 농사기간동안 물부족 경험이 있었으며, 모내기 및 벼생육기 강우조건에 따라 물부족을 경험한 것으로 파악되었다. 이로 인해 설문 참여자들의 물절약 필요성에 대해서는 높은 공감대를 나타내었으며, 특히 농업인 대상 물절약 교육의 필요성에 대해서 매우 높은 공감대를 나타내었다. 농업인의 물과다 사용 및 물꼬관리 부실 등 필지단위 물관리 부실에 대해서도 상당히 인정하는 편이었으며, 이러한 농업인의 관행적인 물관리 행태에 대해서 변화를 유도할 수 있는 수리계조직 부활을 통한 농업인 물관리 직접 참여 등의 대안이 필요하다는 의견에 대해서도 긍정적이었다. 또한 농업인 용수이용에 대한 비용 부담에 대해서도 다소 긍정적인 의견도 제시되었다. 본 연구 결과로 농업인의 적극적인 물관리 및 물절약 참여를 이끌어 낼 수 있는 실현가능한 관련 제도 마련의 필요성과 체계적이고 지속적인 물절약 교육 및 홍보 정책 추진의 필요성이 제기된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.731-742
• /
• 2010

Modeling of rubber for design or analysis often requires confusing or complex work because there are a large number of constitutive models to be considered. Some models have few material constants, while others have many. Researchers have to prepare and fit extensive experimental data with caution and discretion. In this paper, we first compared some typical rubber models in which deformation was carried out by stretching up to around eight times the original size. We conclude that continuum-based models and chain molecular models can be used in the study of the small deformation in most engineering applications, but chain molecular models are preferred in the study of the large deformations in most biomaterial applications. As discrimination problems, Treloar's patch and cylindrical balloon stick are tested theoretically and numerically for studying bifurcation. In the case of Treloar's patch, by using the Kearsley's equation, we show that bifurcation exists for continuum-based models but not for chain molecular models. Both models show bifurcation in the cylindrical balloon stick. Therefore, in the analysis of the bifurcation of rubber showed that its existence also depends on the constitutive model selected.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2022

A weighted linear combination of seismic fragility models previously developed for cut-and-cover railway tunnels was presented and the appropriateness of the combined model was evaluated. The seismic fragility function is expressed in the form of a cumulative probability function of the lognormal distribution based on the peak ground acceleration. The model uncertainty can be reduced by combining models independently developed. Equal weight is applied to four models. The new seismic fragility function was developed for each damage level by determining the median and standard deviation, which are model metrics. Comparing fragility curves developed for other bored tunnels, cut-and-cover tunnels for high-speed railway system have a similar level of fragility. We postulated that this is due to the high seismic design standard for high-speed railway tunnel.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.125-132
• /
• 2020

Embedded joints in the rock mass are a major constituent influencing its mechanical behavior. Numerical analysis requires a rigorous modeling methodology for the rock mass with detailed information regarding joint properties, orientation, spacing, and persistence. This paper provides a mechanical model for a jointed rock mass based on the implicit joint-continuum approach. Stiffness tensors for rock mass are evaluated for an assemblage of intact rock separated by sets of joint planes. It is a linear summation of compliance of each joint sets and intact rock in the serial stiffness system. In the application example, kinematic analysis for a planar failure of rock slope is comparable with empirical daylight envelope and its lateral limits. Since the developed implicit joint-continuity model is formulated on a continuum basis, it will be a major tool for the numerical simulations adopting published plenteous thermal-hydro-chemical experimental results.