• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.285-293
• /
• 2018

This study aimed to evaluate the effect of height suppression of cucumber and tomato plug seedlings as affected by mechanical stimulus using brushing as environment-friendly method. Cucumber (Cucumis sativus L. 'Joeunbaekdadagi') and tomato (Solanum lycopersicum L. 'Mini Chal') seeds were sown in 40-cell plug trays ($54{\times}27.5{\times}5cm$) filled with growing medium on Oct. 9, 2017. The cultivation environment in a venlo-type glasshouse was maintained as cultivation temperature range of $15-25^{\circ}C$ and the relative humidity of $50{\pm}10%$. Nontreatment and diniconazole ($7.5mg{\cdot}L^{-1}$) application at 15 days after sowing were used as the control. In addition, brushing treatments in cucumber and tomato were applied interval of 2, 4 or 6 hrs for 15 and 20 days, respectively. Plant height, hypocotyl length, and internode length were inhibited for cucumber and tomato in the diniconazole treatment than in the control. The leaf size was reduced, both cucumber and tomato, while the SPAD increased under the diniconazole treatment. However, stem diameter of cucumber was the thickest in the 2 hrs brushing interval treatment. Fresh weights of shoot and root were the significantly lowest in the diniconazole treatment. Application of brushing improved seedlings quality by promoting dry weights of shoot and root, and compactness of tomato seedlings. The chlorophyll fluorescence of tomato seedlings drastically decreased with 2 hrs treatment, indicating that mechanical stress by brushing treatment. The relative growth rate of tomato seedlings was significantly lower in the diniconazole treatment, but cucumber seedlings were not significantly different in all treatments. As a results, height suppression of cucumber and tomato seedlings was best achievement in the diniconazole treatment by the chemical as growth regulator. In an environment-friendly point of view, however, it is considered that 2 hrs brushing interval treatment can be the applicability for replacing the chemical methods in plug seedling growth of cucumber and tomato.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• Sijohaknonchong
• /
• v.42
• /
• pp.213-238
• /
• 2015

Jeongun(丁芸) Lee, Young-do (李永道), who is deemed a representative female poet of Korea, began her literary career in May, 1946 when she published in a publication called "Bamboo Sprout, (죽순)". Her Korean identity, which was formed through her Confucius upbringing as well as traditional value system of her family, had a strong presence in her work, and she remained a quintessential figure in Korea's female sijo poet circle for 30 years until her passing in 1976. Despite the highly acclaimed talent and her noble aspirations, it is undeniable that her works did not receive fair assessment due to her private life. Against this backdrop, it is necessary to deeply inquire the literary values and beauty of Young-do Lee's sijo. As mentioned, Young-do Lee is a solidly established figure in Korea's modern poetry. The following illustrates the spirit and the world of her poetry. First, Young-do Lee lived through turbulent times and it was her country that served as the source of her sijo work. Assessing the multitude of dramatic historical events such as Japanese colonization, 8.15 Liberation of Korea, division of the nation, 6.25 Korean war, 4.19 Revolution, 5.16 military coup, it is natural that patriotism was strongly present in her work who was one of the intellectuals at the time. Second, Young-do Lee is a poet who had experienced more pain than others in terms of the turbulence of the time. Her Korean identity, which was formed through her Confucius upbringing as well as traditional value system of her family, had a strong presence in her work. Third, Jeongun Lee, Young-do is a poet of longing. The abundance and richness of her emotions were fortified through the relationship with another poet, Chihwan Yu. Fourth, Young-do Lee is a poet opened up new horizons for the modennization. The transparency of image reflected in her work and the elaborate nature of her language are outstanding. In summary, Young-do Lee was a true artist, who has a strong presence in Korea's modern poetry society, and who was a poet of patriotism, poet who suffered the turbulence of the times, and a poet of longing.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.1-11
• /
• 2011

Many researchers have studied on the methods to improve the processor performance. However, high integrated semiconductor technology for improving the processor performance causes many problems such as battery life, high power density, hotspot, etc. Especially, as hotspot has critical impact on the reliability of chip, thermal problems should be considered together with performance and power consumption when designing high-performance processors. To alleviate the thermal problems of processors, there have been various researches. In the past, mechanical cooling methods have been used to control the temperature of processors. However, up-to-date microprocessors causes severe thermal problems, resulting in increased cooling cost. Therefore, recent studies have focused on architecture-level thermal-aware design techniques than mechanical cooling methods. Even though architecture-level thermal-aware design techniques are efficient for reducing the temperature of processors, they cause performance degradation inevitably. Therefore, if the mechanical cooling methods can manage the thermal problems of processors efficiently, the performance can be improved by reducing the performance degradation due to architecture-level thermal-aware design techniques such as dynamic thermal management. In this paper, we analyze the cooling efficiency of high-performance multicore processors according to mechanical cooling methods. According to our experiments using air cooler and liquid cooler, the liquid cooler consumes more power than the air cooler whereas it reduces the temperature more efficiently. Especially, the cost for reducing $1^{\circ}C$ is varied by the environments. Therefore, if the mechanical cooling methods can be used appropriately, the temperature of high-performance processors can be managed more efficiently.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.403-409
• /
• 2010

The purpose of this study was to examine the teaching efficiency of clinical training for dental hygiene students in Gyeonggi Province. The subjects in this study were 371 dental hygiene juniors in seven different colleges in Gyeonggi Province, on whom a self-administered survey was conducted. The collected data were analyzed with a SPSS WIN 12.0 program, and the findings of the study were as follows: 1. The teaching efficiency of clinical training that the dental hygiene students undergone was on the average. As for evaluation of the factors of teaching efficiency, they gave the highest marks to the role model factor(3.40). 2. The size of the institutions where they received clinical training made no statistically significant differences to the teaching efficiency of their clinical training. The university hospitals ranked first in professional knowledge, one of the sub-directory of teaching efficiency, and the gap between them and the others was statistically significant(p=.005). 3. Concerning links between satisfaction level with the major and view of teaching efficiency, stronger satisfaction with the major led to better perception of teaching efficiency(p=.001). Among the subdirectory of teaching efficiency, that made statistically significant differences to view of interpersonal skills, performance as a supporter, fair evaluation, academic organization skills(p=.005), encouragement and support, teaching methods, professional academic knowledge(p=.001), communicative competency, performance as a role model and cooperation with the staff of dental clinics(p=.000). 4. There were no statistically significant gaps in teaching efficiency according to teaching styles. Among the sub-directory of teaching efficiency, statistically significant differences were found only in encouragement and support(p=.005). The above-mentioned findings suggest that the teaching efficacy of the clinical training was approximately on the average, and that a better satisfaction with the major led to a higher teaching efficacy. Therefore a wide variety of teaching methods and systematic training programs should be developed to boost the quality of clinical training to improve its teaching efficacy.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.6-15
• /
• 2009

In this paper, a new 4-way search window is designed for the high-performance 2D PE architecture in H.264 Motion Estimation(ME) to improve the memory bandwidth. While existing 2D PE architectures reuse the overlapped data of adjacent search windows scanned in 1 or 3-way, the new window utilizes the overlapped data of adjacent search windows as well as adjacent multiple scanning (window) paths to enhance the reusage of retrieved search window data. In order to scan adjacent windows and multiple paths instead of single raster and zigzag scanning of adjacent windows, bidirectional row and column window scanning results in the 4-way(up. down, left, right) search window. The proposed 4-way search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 3.1, though the 1/3-way search window redundantly requires $7.7{\sim}11$ times of data retrieval. Thus, the new 4-way search window scheme enhances the memory bandwidth by $70{\sim}58%$ compared with 1/3-way search window. The 2D PE architecture in H.264 ME for 4-way search window consists of $16{\times}16$ pe array. computing the absolute difference between current and reference frames, and $5{\times}16$ reusage array, storing the overlapped data of adjacent search windows and multiple scanning paths. The reference data could be loaded upward and downward into the new 2D PE depending on scanning direction, and the reusage array is combined with the pe array rotating left as well as right to utilize the overlapped data of adjacent multiple scan paths. In experiments, the new implementation of 4-way search window on Magnachip 0.18um could deal with the HD($1280{\times}720$) video of 1 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps at 149.25MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.21-31
• /
• 2010

This paper presents a design of PLL and SSCG for reducing the EMI effect at the electronic machinery and tools for DisplayPort application. This system is composed of the essential element of PLL and Charge-Pump2 and Reference Clock Divider to implement the SSCG operation. In this paper, 270MHz/162MHz dual-mode PLL that can provide 10-phase and 1.35GHz/810MHz PLL that can reduce the jitter are designed for 2.7Gbps/162Gbps DisplayPort application. The jitter can be reduced drastically by combining 270MHz/162MHz PLL with 2-stage 5 to 1 serializer and 1.35GHz PLL with 2 to 1 serializer. This paper propose the frequency divider topology which can share the divider between modes and guarantee the 50% duty ratio. And, the output current mismatch can be reduced by using the proposed charge-pump topology. It is implemented using 0.13 um CMOS process and die areas of 270MHz/162MHz PLL and 1.35GHz/810MHz PLL are $650um\;{\times}\;500um$ and $600um\;{\times}\;500um$, respectively. The VCO tuning range of 270 MHz/162 MHz PLL is 330 MHz and the phase noise is -114 dBc/Hz at 1 MHz offset. The measured SSCG down spread amplitude is 0.5% and modulation frequency is 31kHz. The total power consumption is 48mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.

• Clean Technology
• /
• v.20 no.2
• /
• pp.189-201
• /
• 2014

Partial oxidation, $CO_2$ reforming and the oxidative $CO_2$ reforming of $CH_4$ to produce synthesis gas over supported Ni hydrotalcite-type ($Ni_{0.5}Ca_{2.5}Al$ catalyst) catalysts were carried out and the effects of metal supports (i.e.; Mg and Ca) on the formation of a stable double-layer structure on the catalysts were evaluated. The $CH_4$ reforming stability was determined to be affected by the differences in the interaction strength between the active Ni ions and support metal ions. Only a Ni-Mg-Al composition produced a highly stable hydrotalcite-type double-layered structure; while the Ni-Ca-Al-type composition did not. Such structure provides excellent stability for the catalyst (-80% efficiency) as confirmed by the long-term $CO_2$ reforming test (-100 h), while the Ni-Ca-Al catalyst exhibited deactivation phases starting at the beginning of the reaction. The interaction strength between the active metal (Ni) and the supporting components (Mg and Al) was determined by temperature-programed reduction (TPR) analyses. The affinity was also confirmed by the TPR temperature because the Ni-Mg-Al catalyst required a higher temperature to reduce the Ni relative to the Ni-Ca-Al catalyst. The highest initial activity for synthesis gas production was observed for the $Ni_{0.5}Ca_{2.5}Al$ catalyst; however, this activity decreased quickly due to coke formation. The $Ni_{0.5}Ca_{2.5}Al$ catalyst exhibited a high reactivity and was more stable than the other catalysts because it had a higher resistance to coke formation.

• Korean Journal of Agricultural Science
• /
• v.7 no.1
• /
• pp.52-58
• /
• 1980

This study was conducted to detect copper which is considered in the soils of orchards, since copper fungicide has been applied to fruit trees. Soil samples taken from the fields of the chief producing districts of apple (Chungju, Yesan, Daegu), pear (Yangju, Bucheon, Seonghwan) and citrus (Seogypo in Jeju island) were analysed by an atomic absorption spectrophotometer. The results obtained were summarized as follows ; 1. In orchards of apple, the amount of copper of soils from Yesan, Chungju and Daegu were ranged 2.6-171.3ppm, 2.2-136.1ppm and 14.3-134.6ppm, respectively. Very little copper was detected from the soils in the field which has been cultivated for less than 20 years. About 100ppm and 130-170ppm of copper were detected in the field which has been cultivated for 30 years and for 50-60 years, respectively. Most of the copper was detected in the surface layer of soils (0-10cm), while very low content of copper was detected in the deeper layer of soils (10-20cm). 2. In orchards of pear, 20-30ppm of copper was detected from the surface of soils in the field which has been cultivated for more than 30 years and the highest level of copper, 36.8ppm, was detected from Yangju area. The amount of copper of soils from Yangju, Seonghwan and Bucheon were ranged 3.6-36.8ppm, 9.7-19.4ppm and 3.6-24.7ppm, respectively. 3. In orchards of citrus of Jeju island, only trace amount and 23-38ppm of copper were detected in the fields cultivated for 15 years and 20-30 years, respectively. The highest level of copper, 57ppm, was detected from the surface layer of soils in the field which has been cultivated for 35 years, but in most of the soil samples tested, only the natural background level of copper, about 20ppm, was detected. 4. The levels of copper residue in all the soil samples tested were lower than the tolerance level (125ppm of copper which is extracted in 0.1N-HCl solution), except those of copperr residue, 130-170ppm, that were detected from the orchards of apple which have been under cultivation for 50-60 years. Hence no problem for the farming could be speculated with the present concentration of copper analysed.