• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.203-211
• /
• 2008

Minimizing damage to anatomical structure is a prerequisite for skeletal anchorage system to install a miniscrew. This research has focused on evaluating the stability and safety of installation in the maxillary molar buccal area, in which most miniscrews are installed clinically and initial fixation is weak. CT (computerized tomography)images were taken for surveying the possibility of damaging to adjucent teeth in accordance with installation angle. If we install a mini-screw($1.2{\times}6.0mm$) in the maxillary molar buccal area, it would be located generally in the 5~8mm upper of CEJ and 3~5mm inner of the cortical bone surface. We has measured the space between roots And comparison has been made for gender and the space between roots in accordance with the 3 different angles of installation(30 degree, 40 degree, 60 degree) in 3 categories. Category 1 : between 1st molar and 2nd molar Category 2 : between 1st molar and 2nd premolar Category 3 : between 1st premolar and 2nd premolar The result are as follow; 1. The space for category 1 was significantly small. 2. For the installation angle, it was safer to install with steeper angle in category 1 and category 2, but not in category 3. According to these results, the installation a miniscrew in category 2, 3 is safer than in category 1. And it is safer to install with steeper angle in category 1 and category 2.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.723-730
• /
• 2000

Orthodontic tooth movement requires remodelling of periodontal tissues, especially alveolar bone. Fluoride is known to be a potent inhibitor of osteoclastic bone resorption. The purpose of this study was to examine the effects of a consumption of fluoride on osteoclast numbers appearing on the pressure side of alveolar bones at experimental tooth movement. 40 male rats were exposed to 0, 10, 25 mg/kg/day of sodium fluoride(NaF) in their drinking water for up to 60 days. Orthodontic appliance were activated to mesially tip maxillary first molar with 50-70g. The rats were sacrificed at 1, 2, 4 days after initial activation. The number of osteoclast was counted in a $450\times700\;{\mu}m^2$ area interradicular septum on the pressure side of the maxillary first molar. The results were as fellows, 1. There was significantly different osteoclast number between control group and 25 mg/kg/day group at all measured time. (p<0.05) 2. There was significantly different active bone-resorption area between control group and 25 mg/kg/day group except at 96 hours post activation. (p<0.05) 3. There was slight reduction of active bone- resorption area in control group from 48 hours to 96 hours but in both 10 mg/kg/day group and 25 mg/kg/day group a slight increase was observed from 48 hours to 96 hours.

• Journal of Naturopathy
• /
• v.7 no.2
• /
• pp.63-69
• /
• 2018

Purpose: The purpose of this study was to investigate the effects of Bacillus fermentation broth (ENM) on the human NK cell activity, and bone matrix density, matrix content and area of hamsters fed ENM. Methods: NK cell activity was tested, and bone mineral density were measured by x-ray. Results: NK cell activity was significantly higher in the control group (644.71 pg/ml) and in the test group (1796.37 pg/ml) (p<.004). Test groups were significantly increased by 1110.37 pg/ml in the pre-test and 1796.37 pg/ml in the post-test(p<.001). Behavioral observations after feeding ENM to hamsters showed normal behavior with no difference between control and test groups. The hamster body weight of the control was 106 g at the initial and final 27 days. In the test group, the initial weight was 96.6 g and the final 27 days was 114 g. No morphological changes were observed in the X-ray photographs of the hamster hind legs. The bone matrix density was 0.059 g/cm³ in control and 0.062 g/cm³ in the test, which was increased by 0.003 g/cm³. The bone matrix content was 0.175 g in the control and 0.196 g in the test. The bone area was 2.95 cm² in the control and 3.19 cm² in the test, which was increased by 0.19 cm². In the autopsy, neither the control nor the test group showed any remarkable abnormality, and each organ was normal. Conclusions: It is thought that ingestion of ENM is useful for immunity enhancement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.426-433
• /
• 2013

When restoring edentulous patients with lower complete denture, the smaller supportive and retentive area of mandible can lead to poor support and stability, denture dislodgement and pain resulting discomfort. In this situation, implant prosthesis can improve esthetics, stability and occlusal force. Whereas, patients with a upper complete denture can adjust more easier because of palate. Therefore, it is suggested to rehabilitate fully edentulous patients with lower implant-supported, upper complete denture as one of the treatment options. So, we are going to report the case and literature review about how the lower implant prosthesis opposing to upper complete denture affects the bone resorption of maxillary residual ridge.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.445-456
• /
• 2009

Statement of problem: Many studies have been conducted to improve the primary stability of implants by providing bioactive surfaces via surface treatments. Increase of surface roughness may increase osteoblast activity and promote stronger bonding between bone and implant surface and it has been reported that bioactive surface or titanium can be obtained through alkali and heat treatment. Purpose: The purpose of this study was to evaluate the stability of alkali and heat treated implants via histomorphometric analysis. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface, the other groups were treated for 24 hours in 5 M NaOH solution and heat treated for 1 hour at $600^{\circ}C$ in the atmosphere (group 2) and vacuum (group 3) conditions respectively. Surface characteristics were analyzed and fixtures were implanted into rabbits. The specimens were histologically and histomorphometrically compared according to healing periods and change in bone composition were analyzed with EPMA (Electron Probe Micro Analyzer). Results: 1. Groups treated with alkali and heat showed increase of oxidization layer and Na ions. Groups 2 which was heat treated in atmosphere showed significant increase of surface roughness (P<.05). 2. Histomorphometric analysis showed significant increase in BIC (bone to implant contact) according to increase in healing period and there was significant increases in groups 2 and 3 (P<.05). 3. BA(bone area) ratio showed similar results as contact ratio, but according to statistical analysis there was significant increase according to increase in healing period in group 2 only (P<.05). 4. EPMA analysis revealed no difference in gradation of bone composition of K, P, Ca, Ti in surrounding bone of implants according to healing periods but groups 2 and 3 showed increase of Ca and P in the initial stages. Conclusion: From the results above, it can be considered that alkali and heat treated implants in the atmosphere have advantages in osseointegration in early stages and may decrease the time interval between implantation and functional adaptation.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.57-67
• /
• 2002

The effect of $\beta$-TCP and PHA as additives on initial setting time, compressive strength and surface micro-structure after in vitro test of bone cement in TTCP and DCPA system was investigated. The median particle sizes of TTCP, $\beta$-TCP, DCPA and PHA for bone cement were about 3, 5, 0.9 and 4${\mu}{\textrm}{m}$, respectively. Initial setting time and compressive strength of bone cement with various composition was measured by Vicat test and Universal Testing Machine, and surface morphology and crystalline phases of bone cements were observed and analyzed by SEM and x-ray diffractometer. Initial setting time was not affected by composition but by powder/liquid ratio, and cement with PHA required double amount of solution for paste as much as one without PHA, especially. It was thought that $\beta$-TCP and PHA in bone cements was not related to setting reaction. Thus, the addition of $\beta$-TCP and PHA in bone cements decreased compressive strength and inhabited HAP from being produced on surface in vitro test. In conclusion, it was not expected that $\beta$-TCP and PHA in TTCP-DCPD bone cements enhanced the strength and bioacitivity.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.179-182
• /
• 2009

Purpose: Point fixation at the margin of the glenoid is a limitation of conventional arthroscopic stabilization using suture anchors, and does not afford sufficient footprint healing, especially in glenoid bone deficiency. So, we introduce an arthroscopic suture bridge transosseous-equivalent technique for bony Bankart lesions to avoid the technical disadvantage of point contact with anchor fixation and to improve mechanical stability through cross compression of the labrum. Surgical approach: The technique was adapted from the transosseous-equivalent rotator cuff repair technique using suture bridges, which improved the pressurized contact area and mean pressure between the tendon and footprint. After preparation of the glenoid bed by removal, reshaping, or mobilization of the bony lesion, two anchors (3.0 mm Biofastak, $Arthrex^{(R)}$, Naples, FL) were inserted into the superior and inferior portion of the bony Bankart lesion. Using a suture hook, medial mattress sutures were applied around the capsulolabral portion of the IGHL complex to obtain sufficient depth of glenoid coverage. A 3.5 mm pushloc anchor ($Arthrex^{(R)}$, Naples, FL) hole was made in the articular edge of the anterior glenoid rim. distal, suture bridge was applied, and proximal was inserted to mobilize the labrum in the proximal direction. This avoided the technical disadvantage of point contact with anchor fixation and decreased the level of gap formation through cross-compression of the labrum.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.710-718
• /
• 2002

It is reported that Pueraria Radix contains phtoestrogens whereas flower, and bud of Pueraria lobata Ohwi were not known. In the present study, we determined the amount of phytoestrogen in each portion of P. lobata Ohwi and carried out therapeutic effects of osteoporosis. The amounts of genistein, daidzein, and formononetin in Pueraria Radix (PR), Pueraria Flos (PF), and young Pueratia Folium (PL) were quantitated using a HPLC system. Proliferation of osteoblast and growth inhibitory effect on osteoclast were measured in order to screen their effects on osteoporosis. Proliferation of osteoblast-like cells (Saos-2) was analyzed by both MTT methods and alkaline phosphatase (ALP) assays. Growth inhibitory effect on osteoclast was also detected as Tartrate resistant acid phosphatase (TRAP) assay. Ovariectomized rat as an in vivo animal model was selected and administrations of PR were 1 g/kg/day (PR-1) and 5 g/kg/day (PR-5) for 9 weeks, respectively. Trabecular bone areas (TBAs) of tibia and lumbar were analyzed usibg histomorphological methods. Results show that PR contains the highest level of daidzein ($10435{\pm}2143\;mg/kg$ of dried herb) and stimulated ALP activity, approximately 160% of the control. Growth inhibitory effect on osteoclast by both PR and daidzein were almost identical with control although $IC_{50}$ of genistein was $5.81{\times}10^{-7}$ M. Increases in body weight of OVX rats were suppressed by administration of PR but wet weights of uterus in PR-5 group were increased (p<0.05). Plasma ALP and HDL-cholesterol levels were decreased following ages (p<0.01), and LDL-cholesterol level was also decreased in PR-5 group at 20 week of age (p<0.01). TBAs of tibia and lumbar in PR-1 and PR-5 groups were higher than those of the control although the values were less than those of the sham group (each p<0.01) In conclusion, administrations of PR prevented loss of TBAs of tibia and lumber in OVX rats, while PL and PF did not (p<0.01).

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.178-187
• /
• 2006

The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of $15{\times}15{\times}20mm^3$ was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at $90^{\circ},\;75^{\circ},\;60^{\circ},\;45^{\circ},\;and\;30^{\circ}$ to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.61-70
• /
• 1995

The purpose of this paper is to calculate the excavation volume of unequal interval grid using nonlinear boundary in eathwork volume determination for reclamation of the foreshore. A congruence area formula by first and third equation is compared with trapezoidal, simpson formulas to earthwork volume. And nonlinear spot level method of unequal interval grid is compared with linear and nonlinear spot level method of equal interval grid excavation volume. As a result algorithm of derived area and volume formula should provide a better accuracy than linear and nonlinear spot level currently in use. Practical application of each method to the excavation volume is illustrated by digital elevation model of aerial photogrammetry and model test of aquarium.