• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.20-23
• /
• 2012

본 연구는 유기성폐기물을 처리하고 그것을 이용하여 고체연료 또는 퇴비를 생산하는 종합시스템에 관한 것이다. 유기성폐기물은 90% 전후의 높은 함수율을 나타내고 있기 때문에 처리에 중점을 두어야 할 부분이 수분 처리 방법이다. 따라서 기존의 처리방법으로는 고액분리하여 처리 후 하천에 방류하는 시스템에 의해 처리되고 있다. 하지만 본 연구에서는 기술개발의 차별화 및 선행기술의 회피 전략을 위해, 유기성폐기물의 수분을 건조시키는 방법으로 미생물이 유기성폐기물의 유기물을 분해하여 발생 되는 $80^{\circ}C$ 이상의 열에너지에 의해 수분을 제거하는 발열반응을 적용하여 수분을 제거하는 무방류시스 템이다. 뿐만 아니라 고체연료의 발열량을 높이기 위해서 무연탄, 코크스, 기름 등의 열량보조제를 첨 가하는 대신에 유기성폐기물을 첨가 한 후 적당한 발열반응 및 건조시켜 고체연료를 제조하는 방법으 로 4,000kcal/kg 이상의 높은 발열량을 얻을 수 있으며 불완전연소 등에 의한 2차 오염을 방지할 수 있는 기술이다. 따라서 친환경 미생물 발열반응에 의해 유기성폐기물을 저렴한 비용으로 액상 및 고상 을 동시에 처리 할 수 있으며, 고체연료를 제조할 수 있는 새로운 신기술이다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.105-112
• /
• 2016

The drying test was carried on the globular type cow manure pellet for use in solid fuel applications. The globular type cow manure pellet fuel was sorted according to size by rotatory sieves. The three kind of drying methods such as convection hot-air drying method, infrared ray drying method and superheated steam method were used to dry the globular type cow manure pellet. Among the three kind of drying methods, superheated steam method of dry time was the shortest. The apparent specific gravity and low calorific value of dried cow manure pelltes was about $250{\sim}350kg/m^3$ and above 3,000 kcal/kg respectively. The smaller the particle size of cow manure pellets, the less drying time was required. The time was required very less for drying smaller particle size cow manure pellet when compared to larger size. In the case of the same drying condition, it has been found that reducing the particle size of cow manure fuel pellet is an important factor for shortening the drying time of the livestock manure pellet.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.246-250
• /
• 2006

In general, combustion characteristic of hybrid propulsion was shown with the regression rate depending on only massflow rate of oxidizer But this empirical relation was not represented well effect of the thermo-chemical properties of solid fuel. So, in this study, the combustion characteristics was studied with the mass transfer number(B number) of solid fuel instead of regression rate with various fuel. The PMMA, PP, and PE were used as fuel, and gas oxygen as oxidizer in this experiment. The mass flowrate of gas oxigen was controlled by the several chocked orifices that have different diameter, and the oxidizer supply range was $3.66\sim45.3g/sec$. As result, the empirical relation for mass flux of solid fuel was obtained with mass transfer number, and mass flux of oxidizer as follow; $\dot{m}^{'}_f\;=\;0.0175G^{0.55}B^{0.4}$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.237-240
• /
• 2009

To estimate the surface temperature for the hybrid solid fuels correctly is very important for the modelling of the hybrid combustion. Because it is used for the calculation of regression rate. In this study, The measurement of the surface temperature were performed with the solid fuels inserted the thermocouple. Its variation was investigated in the range of mass flux for an oxidizer.

• Journal of the KSME
• /
• v.43 no.4
• /
• pp.42-45
• /
• 2003

이 글에서는 고체산화물 연료전지(SOFC)의 소개 및 작동원리에 대해서 알아보고, 세계적인 개발현황을 살펴본다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.53-59
• /
• 2019

Solid fuel reacts with an oxidizer during combustion of a propellant to increase performance. Representative solid fuels are aluminum, cyclotrimethylenetrinitramine (RDX) and octahydro-1, 3,5,7-tetra nitro-1,3,5,7-tetrazocin (HMX). During combustion, these compounds generate white smoke by reacting with moisture and produce materials that are harmful to the environment, such as carbon monoxide, carbon dioxide, and methane gas. This study prepared a high-nitrogen-containing energetic material, hydrazinium 5-aminotetrazolate (HAT), which could be applied as a solid fuel. The compound was characterized by nuclear magnetic resonance (NMR) spectroscopy, and a thermal analysis was measured by differential scanning calorimetry (DSC). Also, the specific impulses and volumes of detonation gases were calculated using the EXPLO5 program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.858-865
• /
• 2011

This paper describes the characteristics of hydrogen generation from solid-state $NaBH_4$ and fuel cell operation for fuel cell aircraft. The solid-state $NaBH_4$ was used for a high hydrogen storage density, and was reacted with hydrochloric acid to generate hydrogen. The hydrogen generation rate for the solid-state $NaBH_4$ reaction was measured at various conditions. As a result, the hydrogen generation rate was increased with the feed rate and concentration of hydrochloric acid, while not be affected by the reaction temperature. A fuel cell was connected with the solid-state $NaBH_4$ hydrogen generator. The stable power output was obtained at the gradual and sudden increases of electric loads.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.239-242
• /
• 2008

Combustion Characteristic with initial port-diameter of fuel was studied in hybrid propulsion system using cylindrical single port-grain. In order to understand a variation of combustion characteristic with initial port-diameter, experimental studies were performed with the GOX and $GN_2O$ as oxidizer, and PE as fuel. As results, burning rate decreased with increase of initial port-diameter of fuel. And the variation of burning rate with using $GN_2O$ is smaller than using GOX.

• 기계와재료
• /
• v.26 no.1
• /
• pp.16-26
• /
• 2014

고체 산화물 연료전지는 세라믹 소재의 이온전도성 막과 전극에서의 전기화학반응을 이용하여 전력을 생산하는 장치로서 발전효율이 높고, 배출물 특성이 우수하여 미래형 청정발전기술로 각광받는 기술이다. 더불어 소음이 적게 발생하므로 주로 도심지 건물에 설치되는 분산형 발전시스템으로서 장점을 가지고 있다. 본 동향분석에서는 고체산화물 연료전지 시스템의 개발동향을 살펴보고, 시스템별 사이클 구성방법에 대한 기술적인 차이점을 비교-분석하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.196-201
• /
• 2003

대부분의 고체와 액체의 연소는 고체의 열분해에 의해 생성되는 가연성 기체나 액체의 증발에 의한 가연성증기가 공기중에 확산되는 형태의 확산연소이다. 이런 확산 연소에서 연소속도를 지배하는 요소는 연료와 산화제의 확산속도이며 고체와 액체 연료의 경우 기체상태의 열분해 생성물이나 증기의 생성속도가 연소속도에 영향을 미치는 요소가 된다. 이러한 형태의 연소에서 연료와 산화제의 공급상태에 따라 발열량 및 화염의 형태 등이 영향을 받게 된다. 화재에서 화재의 확대에 영향을 미치는 요소들 중에 화염의 높이와 복사열 에너지 등이 있다.(중략)