• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.68-78
• /
• 2023

In this paper, improvement measures were studied for false alarm (abnormal lighting) of emergency hydraulic warning light due to RF radiation signals in aircraft. When the warning lamp of the emergency hydraulic system is lit during flight due to electromagnetic interference caused by RF radiation signals, it affects flight mission and safety which can result in efficiency degradation and maintenance of flight mission. For false alarm of emergency hydraulic warning light, root cause analysis and troubleshooting were carried out. By shielding a composite strip under fuselage of the aircraft located in the path of the RF radiation signal, the RF radiation signal flowing into the emergency hydraulic indicator was blocked. Results of applying the improvement method through ground and flight monitoring were also described.

• Information and Communications Magazine
• /
• v.24 no.9
• /
• pp.86-95
• /
• 2007

사무실과 가정의 컴퓨터, 대중화된 휴대폰 사용 그리고 인터넷으로 특징지어지는 정보통신 기술덕택에 현대인은 어느 정도 시간과 공간의 제약을 극복하고 있다. 그러나, 아직도 현대인은 예전에 비해 가까워진 지구촌을 여러 가지 이동체를 타고 이동을 하여야한다. 특히 현대인에게 있어서 자동차는 가정과 직장을 이어주고 업무 목적지와 휴식을 위한 휴양지를 찾아가기 위한 실질적인 이동 수단으로서 가정과 직장에 이은 또 하나의 정보통신기술이 필요한 중요한 영역이다. 따라서 미래형 자동차는 편의 주행, 쾌적 주행을 제공하고 그리고 안전 주행이 보장되는 지능형 자동차의 수요가 예견되고 있으며 이를 구현하기위해 첨단 정보통신, 전자, 제어기술이 요구되고 있다. [1][5][6] 이상과 같은 지능형 자동차 관련 응용 분야는 위 그림과 같이 자동차 여러 부위에 장착되는 첨단 전장품들에 의해서 구현이 된다. 그러나, 기존의 자동차와 달리 미래형 지능형 자동차에서는 많은 전장품들이 장착됨에따라 소요되는 전원의 용량이 증가하게되어 기존 12V에서 42V 시스템으로 바뀔 예정이다. 또한 각종 센서로부터 정보신호를 받아서 정보처리를 하고 Actuator를 제어하기 위해서 많은 전장품들간에 연결되는 신호선들의 배선이 복잡해짐에따라 생산부서에서의 공정비용이 증가하게된다. 또한 향후 석유 에너지의 고갈에 따른 전기 자동차로의 전환이 예상되는데 위에서 언급된 많은 전자장치들간 신호를 주고 받기위해 차량내 여러부위로 퍼져있는 배선들이 차지하는 무게가 상당하므로 차체의 무게를 가볍게 해야하는 차세대 전기 자동차의 성능 향상을 위해서 효율적인 In Vehicular Network 기술이 요구된다. 또한 향후 자동차에 장착된 많은 전자장치들의 고장 진단 및 내장된 SW를 효율적으로 갱신하기 위해서는 여러 전자장치들이 하나의 버스로 연결되는 In Vehicle network이 필수적이다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2295-2297
• /
• 2004

원자로의 제어봉 구동장치에 공급되는 전력을 제어하는 전력함 전력제어기는 DSP를 이용하여 디지털 시스템으로 설계하였다. 전력제어기는 Master/Slave 형태로 이중화되어 신뢰성이 향상시켰고 전력제어기의 CPU 보드에는 제어용과 통신용 두 개의 DSP를 사용하여 전력제어기의 주 기능인 제어/감시와 통신 기능을 분리하여 담당시켰다. 전력제어기에 요구되는 이러한 기능들을 효과적으로 수행하도록 CPU 보드에 디지털 논리구현 장치인 FPGA를 설치하여 메모리 주소 및 각 부품의 칩 선택 신호를 생성, 이중화 전력제어기 상호간 신호 수수, 각종 고장 검출 및 점호각 신호 발생 등의 역할을 하도록 하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.409-415
• /
• 2016

Recently several techniques for disaster prevention based on IoT(Internet of Things) are being developed. In this paper, a new smart pattern classification method for electric loads is proposed. CT(Current Transformer) data are extracted from electric loads, and then the sampled CT data are converted using FFT and MFCC. FFT and FMCC data are used for the input data of neural networks. Experiments were conducted using FFT and MFCC data for 7 kinds of electric loads. Experiments results indicate the superiority of MFCC in comparison to FFT.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2018

In the case of a radar repeater that used for the trajectory tracking of a high-speed aircraft, it emits pulses of short width. For phase displacement of these signals a branch type phase shifter is used. The phase on the transmission line is changed by utilizing the variable reactance at the end of the displacement branch transmission line. Further, it is easy to control the high output signal, and there is an advantage that the insertion loss is not large even when the reactance fails. In this paper, we will discuss the fabrication test results of a 400 W class phase shifter that sequentially displaces the phase at $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.28-33
• /
• 2011

The purpose of this paper analyzes and studies to improve the failure cases on the computer that one of electronic control elements for engine in liquified petroleum gas vehicle. The first case, it certified the non-starting phenomenon of engine that it's electronic control unit didn't control the fuel for idle speed actuator because of no given action signal in slow-cut solenoid valve. The second case, it knew the bad condition phenomenon of engine and back-fire by the wire melting of ignition coil and firing of transistor being inside ECU. The third case, it certified the action stoping phenomenon of engine and malfunctioning signal for engine ECU because of leakage of current and an excess current by moisture inflowing inside ECU curcuit plate. Therefore, it is thought that will elevate the durability and reliability of engine computer throughout procure of quality.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1036-1042
• /
• 2007

It is rather difficult to improve flight control computer(FLCC) hardware(H/W) development schedule due to lack of commercial off-the-self(COTS) tools or target specific tools. Thus, it is suggested to develop an enhanced process utilizing modeling, simulation and virtual reality tools. This paper presents H/W design process enhancement tool(PET) for FLCC design requirements such as FLCC input/output(I/O) signal flow, I/O fault detection, failure management algorithm, circuit logic, PCB assembly configuration and installation utilizing simulation and visualization in virtual space. New tool will provide simulation capability of various FLCC design configuration including shop replaceable unit(SRU) level assembly/dis-assembly utilizing open flight format 3-D modeling data.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.396-405
• /
• 2009

An interlocking equipment of railway signalling systems should have very high functional safety and reliability properties because of its vital railway protection functionality. In order to achieve the required safety and reliability level, an engineer, in general, designs and implements the interlocking equipment to operate under RTOS(Realtime Operating System) environment, and the control hardware architecture redundant to cope with the random failures of system or subsystem. In such an architecture, it's very difficult to implement the interlocking equipment to communicate with various interface systems including the signal operator's terminal. In this paper, we propose a dual ethernet network topology and dual packet seamless transfer protocol algorithm for railway signaling system such as the interlocking equipment. We verify in this paper that the proposed DPST protocol algorithm has the evidence of its robust properties against the random hardware faults and communication errors. The proposed communication structure and algorithm is implemented in the electronic interlocking equipment for the private railway system of Hyundai Steel Company and its performance and properties are validated on the guideline of European Railway Standard EN50159.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.133-142
• /
• 2010

P-type fire control panel, currently in use, has a big hazard that can cause the large scaled human death tolls and property damage in the massive fire because it is difficult to identify in real time the location of fire outbreak and whether search-device are broken down or not. In this paper, I suggest that the integrated fire automation system on based p-type fire control panel should be used, which can detect in real time the signal that occur when whether search-device are broken down or not, and can detect the arisen circumstances information of p-type fire control panel on the fire signal in the far away. The devised systems have designed and embodied the analysis of circumstances information and module that can analyze the circumstances information from the p-type fire control panel and the part of internet access installment which can gather and deliver the circumstances information from the fire prevention facility receiver.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.3
• /
• pp.113-120
• /
• 2018

In this study, we proposed a monitoring system for identifying and handling faulty sensing stream data on manufacturing equipments where low-cost sensors can be safely used. Low cost sensors will lessen the cost of implementing distributed monitoring system, but suffer from sensor noises and inaccurate sensed data. Therefore, a distributed monitoring system with low cost sensors should identify faulty signal data as either of sensor fault or machine fault, and filter out faulty signals from sensing fault. To this end, we adopted a fourier transform based diagnostic approach mixed with a weighed moving averaging method, in order to identify faulty signals. We measured how effective our approach is and found out our approach can filter out one-third faulty signals from our experimental environment. In addition, we attached wireless communication modules to reduce sensor and network installation cost. To handle massive sensor data efficiently, we employed unstructured data format with NoSQL based database.