• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.407-415
• /
• 2008

슬래그의 팽창성 붕괴는 주로 Free-CaO의 수화 반응이 주된 원인으로 분석되고 있으며, 이 문제의 해결 방안을 마련하기 위해 여러 기관에서 연구가 진행되고 있고, 더불어 콘크리트용 골재로의 활용 방안을 지속적으로 연구하고 있다. 현재, 국내에서는 고로 슬래그에 대한 연구는 많이 이루어지고 있지만, 전기로 및 전로 슬래그와 같은 제강 슬래그에 대한 연구는 극히 미비한 실정이다. 이에, 본 연구의 주재료인 전기로 산화 슬래그의 기초적인 물성 분석뿐만 아니라, 화학적인 메커니즘을 규명하여 콘크리트용 잔골재로서의 활용 가능성을 분석하고, 실생활에 응용하는데 그 목적이 있다고 하겠다. 그렇기 때문에, 본 연구의 진행 방향으로 전기로 산화 슬래그의 성분 분석과 함께 기본 물성을 측정하고, 이후에 중/장기 강도 및 세부적인 내구성 분석을 실시하여, 시멘트 콘크리트 적용의 적합성 평가 후, 규격을 제안하는 절차를 밟았다. 본 연구에 대한 기대 효과는 산업 부산물의 활용에 따른 환경 보전 및 재활용이라는 측면 이외에도, 전기로 산화 슬래그의 시멘트 콘크리트용 잔골재서의 상용화에 있다고 하겠다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.287-288
• /
• 2012

In this study, Analyzed the effect of the change in RFA and RCA substitution rate on the concrete containing BS bonding materials but no cement. The findings are as follows. First, the fresh concrete has less slump value and air contents as more RFA and RCA is used. In case of hardened concrete, as more RFA and RCA are used, the higher the compressive strength of concrete becomes. Especially, the compressive strength of concrete which used recycled aggregates only is found to be 2.2 times as high as that of concrete using natural fine and coarse aggregates only. But if the concrete is to be used as the structural concrete having the compressive strength of 13.8 MPa, the alkaline materials and some cement are required to be added.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.139-140
• /
• 2016

In this research, the possibility of wasted refractory aggregate pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory aggregate was replaced 2%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.206-207
• /
• 2014

Blast furnace slag is one kind of industrial by-product and was utilized with recycled fine aggregates for the manufacture of zero cement mortar. As the blast furnace slag was from different areas, the strength of the specimen using blast furnace slag showed different performances. In this study, blast furnace slag generated in different areas in Korea has been chosen, fundamental performances of the blast furnace slag blended mortar has been tested to evaluate the quality of the blast furnace slag. Results showed that difference for flowability is limited. As the alkali activation of the blast furnace slag, the compressive strength showed different results. The flexural strength showed little difference when the aggregates and types of blast furnace slag changed.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.293-297
• /
• 2016

This study was performed in order to obtain the effect of the compressive strength of the cured product with manufacturing conditions (amounts of fine aggregate and different types of alkali activator). Material which is the basis of the cured product was used for the blast furnace slag, which has a latent hydraulic activity. Consequently, when using sodium hydroxide as the alkali activator, it is possible to obtain a higher compressive strength than using the calcium hydroxide. And also, it can be added a 10% of fine aggregate with blast furnace slag to improve the compressive strength.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.97-104
• /
• 2023

본 연구에서는 순환잔골재 사용량 증대를 목적으로 순환잔골재만 혼입한 고강도 모르타르를 제조하고 이의 물성을 분석하여, 순환잔골재의 구조용 골재로서의 활용가능성을 파악하고자 하였다. 시멘트, 실리카퓸 및 고로슬래그 미분말을 함유한 물결합 재비 0.2 시멘트 모르타르에, 나노실리카를 추가로 혼입하고 이의 치환율을 변화시켜, 나노실리카 혼입량 변화가 순환잔골재 모르타르의 물성 변화에 미치는 영향을 분석하였다. 시험체 제작 시 결합재 내부에서의 나노실리카 분산도 향상을 위해, 초음파 처리한 수분산된 나노실리카 수용액을 활용하였고, 나노실리카의 혼입률은 1 %까지 변화시켜 모르타르 플로우, 공극률 및 압축강도의 변화를 평가하였다. 실험 결과에 따르면, 나노실리카의 혼입률이 증가할수록 모르타르 플로우는 감소하였으며, 나노실리카 혼입률 0.75 %까지는 혼입율을 높일수록 공극률은 감소하고 압축강도는 증가하였으나, 치환율 1 %에서는 공극률의 상승 및 압축강도의 저하가 관찰되어, 나노실리카 혼입률 0.75 %가 성능 최적화를 위해 가장 적절한 혼입 비율인 것을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.56-57
• /
• 2016

Recently amongst Korea's construction companies there has been heightened interest in environment load reduction and resource recycling. As a result, the construction industry is examining recycled materials alternative to cement and blast-furnace slag (BS henceforth) cement, such as waste refractories and desulfurized plaster. This study analyzes the liquidity and intensity characteristics of mortar according to changes in replacement ratios of waste refractories and desulfurized plaster, used as industry by-products in mortar environments that use BS 3-type cements and circulated fine aggregate. As a result, the greater the increase in replacement ratios of desulfurized plaster, the greater the increase in liquidity and air quantity, as well as compression strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.61-62
• /
• 2011

This study reviewed the effect of W/B, WO and curing method on the quality properties of RA using the BS brick under the zero cement condition. compressive strength was found to show an increasing trend as W/B increased, but to show a improvement in case steam curing was conducted, showing a higher increase at 1 day age in comparison with 7 day age. In addition, the compressive strength on the mixing of WO didn't show any specific trend. The absorption tended to decrease as W/B increased and met the less than 10% regulation value at 30~35% W/B in case WO was used, there appeared a decrease attributable to capillary pore filling effect due to saponification. On the other hand, compressive strength increases, th absorption showed a gradually decreasing tendency.

• 대한건축학회논문집:구조계
• /
• 제34권8호
• /
• pp.3-11
• /
• 2018

In this study, total nine R/C beams, designed by the PVA Fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength, and ductility capacity were assessed. Test results showed that test specimens (BSPR-20, 40) was increased the maximum load carrying capacity by 3~6% and the ductility capacity by 9~14% in comparison with the standard specimen (BSS). And the specimens (BSPR-60, 80, 100) was decreased the maximum load carrying capacity by 0~4% and the ductility capacity by 79% in comparison with the standard specimen (BSS) respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.38-39
• /
• 2016

In this research, the possibility of wasted refractory powder pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory powder was replaced 10 %.