• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.301-304
• /
• 2008

The stair joints constructed with prefabricated system are general method doing structure design at hinge. If you regarded joints to come in contact with a flight of stairs and a slope of stairs as hinge, the moment performance of joints is not in the least moment, so as the bending moment of the stair case is increased, the reinforcement increase. Also the use is decreased because increasing the joint damage of the vibration & fatigue load. No less the reason constructed with pin the stair joints because the construction efficiency of field work is useable. Recently, they are considering the construction efficiency, while the semi-rigid detail for bending performance of joints is proposed, but for now they don't reflect the detail. Therefore, we proposed that reflecting the method at design semi-rigid joints. We compared the moment performance with the stair joints designed at the rigid joints, semi-rigid joints and pin joints. The nonlinear behavior of staircase core statically indeterminate structure. The result of research is that a bending stiffness modulus bring to reflect the semi-rigid performance, the performance of the semi-rigid joint is better than pin joints, and that is judged the system better seismic and vibration performance because have excellent ductility more than rigid joint.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.833-840
• /
• 2008

The time and cost can be reduced when applying partial precast concrete to the stair system in comparison to the cast-in-place or precast method. Because the performance of staircase which is used for evacuation can be largely different from connection types of precast concrete member, we tried to know structural behavior and performance evaluation according to each type of stair joints by experimental study. In the cast-in-place rigid joint, much reinforcement is needed in the end portion because much stress is concentrated in the middle portion. Also, in the pin joint which is used in the connection point, the maximum stress occurs in the middle point, so not only the amount of re-bar is increased but also the serviceability is largely decreased. The bolt type of semi-rigid joints proposed in this study had been increased strength and serviceability which is similar to the rigid joints. Also, its ductility was shown about 0.7 times in comparison to the rigid type and was about 2.8 times for the pin joint type. According to the classification of joint in Eurocode, it can be considered that it is one of the semi-rigid joints which are in the semi-rigid-full strength, and the structural behavior can be expected by using a model which applied to stiffness value decreased by 40 percent.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.509-516
• /
• 2011

Compared with the traditional RC system, precast stairs can save construction time, reduce the cost of concrete casting, etc. This paper focuses on an investigation of improved continuous longitudinal joint details for PC stair systems. The performance of the precast concrete stair connections subjected to displacement control cyclic loading is compared with that of the monolithic connection. The developed connection is composed of U-rods and clamp joint metals. This paper proposes precast stair connection with improved structural performance and experimentally evaluates the structural performance of the proposed joints in terms of maximum load, displacement ductiliy, strain, crack and failure modes.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.511-522
• /
• 2014

In this study, an innovative steel stair system is presented which enables rapid erection and high quality control in both residential and office building construction. This system features two lightweight steel stringers of box shape, bolted connections easy to absorb construction tolerance, and stair steps movable transversely (or sliding steps) such that the work space needed for concrete stairway wall could be easily provided. In this type of stairway system, other than providing robust connecting details, ensuring vibration performance is especially important since this system may be vibration-sensitive due to lightweight nature and/or probable low damping. To tackle these issues, a series of full-scale mock-up tests were conducted by using box-shape stringer members with or without concrete-fill. The connection system was shown to be sufficiently stiff and strong, or it remained elastic even under the 160% of service load level. Among the seven stringer alternatives, five exhibited satisfactory vibration performance according to the related North American and European acceptance criteria.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1889-1893
• /
• 2008

본 연구에서는 완경사 계단형 낙차공에서 하류수심 변화에 따른 도수 형태의 변화와 WTF 흐름 특성에 대한 분석을 수행하였다. 일정한 유량에서 하류수위를 증가시키면 도수 형태가 달라지는데 특히 계단 끝단에서 완전도수, 잠김도수(B점프), downward curved jet, upward curved jet, wave type flow(WTF)가 차례로 나타났다. 잠김도수에서는 표면 롤러 현상이 관찰되었고 curved jet에서는 큰 유속 감세 없이 파가 하류까지 전달되었다. WTF에서는 사류흐름이 바닥 recirculation 구역의 영향으로 변형되면서 wave 형태의 도수를 발생시켰다. 하류수위를 점점 증가 시키면 도수의 발생 위치가 계단 위쪽으로 이동하며 잠김도수와 WTF가 번갈아가며 발생하였다. 하류수위가 높아질수록 도수의 규모는 작아졌으며 표면 롤러도 미약해지는 경향을 보였다. 세 가지 유량조건에 따른 WTF의 규모를 비교한 결과 유량이 증가할수록 WTF의 크기가 증가하였으며 무차원화한 WTF의 형상은 거의 비슷한 것으로 나타났다. 계단형 낙차공은 기존낙차공에서 발생하는 도수와 달리 WTF가 발생되므로 이에 대한 분석이 필요하다. WTF가 발생하는 구간의 수위는 하류수위보다 높아지기 때문에 하천 설계 시 하천 접합부의 조건(구수부지설치, 제방설치 등)에 따라 wave의 높이가 설계의 중요 인자로 고려되어야 할 것이다. WTF는 지금까지의 계단형 낙차공 설계 시 고려되지 못한 부분으로서 차후에 계단형 구조물 또는 계단식 변형 구조물 설계 시 주요 자료로 활용 될 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.2 s.54
• /
• pp.137-144
• /
• 2009

This paper provides the results from evaluating the stiffness of Hi-Form joint by an experiment and the system identification method using the dynamic modal data, and the reasonable modeling method of Hi-Form joint which is proposed for improved stair construction recently. Based on the crack pattern and load-displacement relationship and the damage distribution, it can be judged that Hi-Form joint can't fully transfer the forces between the elements linked, and we propose that the joint is modeled as a element which have a stiffness with 50% decrease.

• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.41-49
• /
• 2010

Stepped weir of this study was suggested a type of natural type structures. Unique flow, such as Wave type flow, at downstream of mild slope stepped occurs. WTF(Wave type flow) is different with hydraulic jump occurred at Round crest weir. WTF is phenomenon to rise the water level by recirculation area occurred by step height at downstream of mild slope stepped. Wave height of WTF condition is higher than tailwater level and maximum velocity of WTF condition occurs in area of water surface. In this results, WTF presents to be important factor for design of join area of weir with levee. This study got and analyzed hydraulic condition occurred of WTF, scales of WTF and velocity profiles on flow patterns using experiments. WTF was not consider to stepped weir design and this results can be important data for design of stepped weir and structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.9-12
• /
• 2008

The semi-rigid joint is the shape of middle that can supplement the defect of pin joints and accept the good point of rigid joints. Recently, a study on the pin joints is activated in the country, but because the study on semi-rigid joints is not many, this study tried to prove with producing test model of three shape. The test models are rigid joint HI-R, semi-rigid joint HI-S, pin joint HI-P. As a result of the test, respectively HI-R, HI-S, HI-P appeared shear failure of joint, flexure failure of the top fixing, flexure failure of the lower part slipping stair slab, and the maximum strength is measured to 51.74, 51.4, 24.63kN, the stiffness is appeared 1.58, 1.19, 0.37 respectively, The yield strength is respectively kept 44.5, 47.3, 24kN, and ductility ratio is appeared to 3.31, 2.32, 1.54, when is based on KBC code, sag of the acting service load is appeared that HI-P model is over the standard. When is based on distribution of bars strain ratio, HI-S seems similar behavior incipiently, but after the yield, the semi-rigid joint was able to be judged better than pin joint because of the stress allotment of joint internal elements.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.6
• /
• pp.571-581
• /
• 2014

In the present study, hollow precast concrete wall (PC Double Wall) for staircase construction was developed. Comparing the conventional walls, the PC Double Wall can be reduced the lift weight using hollow core and improves the integrity between the PC members. The cross-section and re-bar details of the PC Double Wall were developed considering precast concrete manufacturing, constructability, and the structural safety. Particularly, a form system was developed to manufacture thin and hollow core PC wall efficiently. A mock-up test for a staircase using the PC Double wall was performed to verify the constructability and integrity of the PC walls. The test result verified that joint deformation and cracking did not occur as showing good constructability.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1977-1979
• /
• 2005

열저항 측정법에는 정상상태보다는 과도응답 특성을 이용하는 것이 우수한 것으로 20년부터 알려져 왔다. 온도를 시간의 함수로 나타내는 열적 계단응답함수를 이용하면 칩에서 주위 분위기, 냉각장치 또는 마운트를 포함한 열 임피던스를 측정할 수 있다. 소자 접합부의 열적 동특성을 측정함으로써 칩 주변의 기하학적 물질에 대한 특성을 파악할 수 있으며 나아가 측정으로부터 소자의 열적 구조를 유추할 수 있다. 본 논문에서는 열적 계단응답 특성을 이용한 열 임피던스 측정이론 및 원리에 대해서 개관하였다.