Evaluation of the Stiffness of Hi-Form Joint Using Damage Detection Method

손상평가 기법을 이용한 Hi-Form 접합부의 강성평가

  • Received : 2008.10.09
  • Accepted : 2008.11.17
  • Published : 2009.03.30

Abstract

This paper provides the results from evaluating the stiffness of Hi-Form joint by an experiment and the system identification method using the dynamic modal data, and the reasonable modeling method of Hi-Form joint which is proposed for improved stair construction recently. Based on the crack pattern and load-displacement relationship and the damage distribution, it can be judged that Hi-Form joint can't fully transfer the forces between the elements linked, and we propose that the joint is modeled as a element which have a stiffness with 50% decrease.

본 연구에서는 최근 계단공사의 시공성 개선을 위하여 새롭게 제안된 Hi-Form 접합부를 대상으로 동특성 정보를 이용하는 계확정기법을 응용하여 접합부의 강성평가를 수행하였으며 해석 시 동 접합부의 합리적인 모델링기법을 제시하였다. 실험 및 해석결과, 균열패턴 및 하중-변형관계 그리고 손상분포로부터 Hi-Form 접합부는 완전한 응력전달을 위한 강접합으로 간주하기 어려운 것으로 나타났으며, 실험결과에 근거하여 Hi-Form 접합부를 약 50%의 강성감소 요소로 모델링 할 것을 제안하였다.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. 이은진, 오영훈, 장극관, 신운식, "선시공 조립식 계단거푸집 시스템의 Mock-up시공 및 성능계측평가", 한국콘크리트학회 학술발표 논문집, 2007. 11, pp. 981-984
  2. 이은진, 오영훈, 장극관, 신운식, "선시공조립식 Hi-Form 거푸집 공법을 적용한 계단접합부의 전단 및 휨강도 평가", 한국콘크리트학회 학술발표 논문집, 2007.11, pp. 85-88
  3. Kim, H. S. and Chun, Y. S., "Structural Damage Assessment of Building Structures Using Dynamic Experimental Data", Journal of the Structural Design of Tall and Special Buildings, 13, 2004, pp. 1-8 https://doi.org/10.1002/tal.227
  4. Ren, W. X. and De Roeck G., "Structural Damage Identification Using Modal Data II: Test verification", Journal of Structural Engineering, Vol. 128, No. 1, Jan,. 2002, pp. 96-104 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(96)