• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.488-491
• /
• 2009

본 논문에서는 응력함수와 Kantorovich method를 이용하여 기저판(substrate)에 인장과 굽힘이 작용할 때 복합재 패치의 3차원 응력을 해석하였다. 면내 방향과 면외 방향의 두 응력함수에 가상 공액일의 법칙(Complementary virtual work principle)을 적용하였으며 복합재 패치의 자유 경계조건과 바닥의 기저판으로부터 전달되는 전단 수직 응력 조건을 부여하였다. 이를 통해서 패치 구조물의 지배방정식을 연립 미분 방정식 형태의 고유치 문제로 변환하여 응력함수를 구하였다. 위 방법의 타당성과 효용성을 검증하기 위한 수치 예제로 cross-ply, angle-ply, quasi-isotropic의 패치 적층 배열을 고려하였으며, 층간 응력함수 값이 자유 경계에서 최고치를 나타내고 패치 중심부로 갈수록 급격히 감소하는 모습을 확인하였다. 제안된 기법은 기저판에 인장하중이 작용하는 경우뿐만 아니라 굽힘 하중이 작용하는 경우에도 정확한 예측이 가능하여, 패치 구조물의 층간 응력을 포함한 3차원 응력을 해석하는데 있어서 효율적인 해석 도구로서 사용할 수 있을 것이라 사료된다.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.9-11
• /
• 1996

We apply a full mutigrid scheme to computing eigenvalues of the Laplace eigenvalue problem with Dirichlet boundary condition. We use finite difference method to get an algebraic equation and apply inverse power method to estimating the smallest eigenvalue. Our result shows that combined method of inverse power method and full multigrid scheme is very effective in calculating eigenvalue of the eigenvalue problem.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.232-240
• /
• 2012

This study proposed efficient method of singular value for inverse problem, linear approximation of contact position and loading in single and double meshing of transmission contact element, using 2-dimension model considered near the tooth by root stress. Determination of root stress is carried out for the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. The predicted results of boundary element method are good accordance with that of finite element method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.13-13
• /
• 1999

본 논문에서는 해석영역의 형상변화, 즉 로켓노즐 내열재의 삭마로 인해 야기된 경계 면의 이동을 고려하면서 2차원 비정상 비등방성 재료의 열전달 문제를 해석할 수 있는 수치해석에 대해 기술하였다. 수치해석 알고리즘은 유한요소법이며 열해석시 경계면 이동으로 인한 격자계의 절점 좌표점이 계산과정 동안에 이동하는 변형 가능한 유한요소격자(transformable finite-element grid)를 사용하였다. 본 수치해석기법의 타당성 입증을 위해 극심한 열하중이 부여된 조건하에서 엄밀해가 존재하는 비정상 축대칭문제 및 고체로켓 노즐내열재에 대해 열해석을 수행하였으며, 그 결과 수치해는 엄밀해 또는 실험치와 잘 일치함을 보이었다. 여러 가지 복합재로 구성된 내삽노즐 또는 외삽노즐에 대해서도 안정된 수치해를 얻을 수 있었다. 아울러 노즐목삽입재로 탄소-탄소 복합재를 적용한 고체추진기관 내삽노즐을 해석모델로 택하여 열전달 해석을 수행하고 해석결과를 분석하였다. 노즐의 표면산화반응에 대한 열반응상수, 즉 Arrhenius 형태로 표시된 식에서 pre-exponential factor 및 activation energy 변화가 탄소-탄소 복합재 및 탄소-페놀릭 복합재의 삭마량에 미치는 영향에 대해서 고찰하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.47-54
• /
• 1993

For the numerical analysis of free oscillation characteristics in a harbor with general boundary and bottom topography, finite element method is applied. The governing Helmholtz equation is transformed into a generalized matrix eigenvalue problem using the standard finite element procedure. A computer code is developed for the numerical evaluation of natural frequencies and free oscillation modes. In the eigensolution process, a shifting strategy is devised for the treatment of numerical singularity. Scaling of coefficient matrix is also found to be effective for the alleviation of numerical ill-conditioning. For the test problems, firstly, analytical and numerical solutions are compared and validity of the code is obtained. Hence the method is successfully applicable for the real-world problems with general geometric boundaries and bottom topography.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.887-897
• /
• 1991

본 연구에서는 이와 같은 배경에서, Fig. 1(f)와 같이 가장 일반적인 이방성 재료가 접합된 경우의 응력확대계수를 명확히 정의하고, 수치해석법으로 구할 수 있는 외삽식을 제안한다. 또한, 탄성문제의 수치해석 방법으로 적은 요소의 분할로써 고 정밀도의 수치해석 결과를 얻을 수 있는 경계요소법(boundary element method:BEM), 특히 저자들이 개발한 복합재료에 대한 2차원 경계요소법 프로그램을 이용하여 이방성 이종재료 접합계면 균열의 응력확대계수를 해석하고, 복합재료내의 섬유방향에 대한 접합계면 균열의 정성적 거동을 고찰하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.1
• /
• pp.11-17
• /
• 1990

Dirichlet boundary value problems originated from unsteady deep water wave propagation are transformed to Boundary Intergral Equation Methods by use of a free surface Green's function and the integral equations are discretized by a cubic spline element method. In order to enhance the stability of the numerical model based on the derived Fredholm integral equation of 1 st kind, the method by Hsiao and MacCamy (1973) is employed. The numerical model is tested against exact solutions for two cases and the model shows very good accuracy.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.73-82
• /
• 1991

Recently, the finite element method has been sucessfully extended to treat the rather complex phenomena such as nonlinear buckling problems which are of considerable practical interest. In this study, a finite element program to evaluate the elasto-plastic buckling stress is developed. The Stowell's deformation theory for the plastic buckling of flat plates, which is in good agreement with experimental results, is used to evaluate bending stiffness matrix. A bifurcation analysis is performed to compute the elasto-plastic buckling stress. The subspace iteration method is employed to find the eigenvalues. The results are compared with corresponding exact solutions to the governing equations presented by Stowell and also with experimental data due to Pride. The developed program is applied to obtain elastic and elasto-plastic buckling stresses for various loading cases. The effect of different plate aspect ratio is also investigated.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.55-61
• /
• 2009

The heat transfer analysis applying finite element method has been carried out. Particularly, the convection boundary condition associated with the mixed boundary condition is numerically formulated by the Galerkin method analogous to the magnetic field problem. Also, the coupled electromagnet-thermal field analysis by the proposed heat transfer coefficient computation algorithm is executed to enhance the accuracy of solutions. Finally, the validity of the proposed results is verified by comparison with the measured ones.

• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1135-1146
• /
• 2013

In this paper, we proposed a new algorithm for individual tooth region segmentation on tooth color images. The proposed algorithm used oral cavity model based on structural feature of tooth and new boundary of watershed algorithm. First, the gray scale image is obtained with emphasized tooth regions from the color images and unnecessary regions are removed on tooth images. Next, the image enhancement of tooth images is implemented using the proposed oral cavity model, and the individual tooth regions are segmented by watershed algorithm on the enhanced images. Boundary and seeds necessary to watershed algorithm are applied boundary of binary image using minimum thresholding and region maximum value. In order to evaluate performance of proposed algorithm, we conduct experiment to compare conventional algorithm with proposed algorithm. As a result of experiment, we confirmed that the proposed algorithm is more improved detection ratio than conventional algorithm at molar regions and the tooth region detection performance is improved by preventing overlap detection on oral cavity.