DOI QR코드

DOI QR Code

Efficient Method of Singular Value for Inverse Problem

역 문제에 대한 특이치 효율화

  • 박성완 (인천대학교 기계시스템공학부)
  • Received : 2011.09.08
  • Accepted : 2011.12.06
  • Published : 2012.04.15

Abstract

This study proposed efficient method of singular value for inverse problem, linear approximation of contact position and loading in single and double meshing of transmission contact element, using 2-dimension model considered near the tooth by root stress. Determination of root stress is carried out for the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. The predicted results of boundary element method are good accordance with that of finite element method.

Keywords

References

  1. Arai, N., Harada, S., and Aida, T., 1981, "Research on Bending Strength Properties of Spur Gears with Thin Rim," Transaction of JSME C, Vol. 47, No. 413, pp. 47-56. https://doi.org/10.1299/kikaic.47.47
  2. Kubo, A., Ueno, T., Jin, J., Ariura, Y., and Nakanishi, T., 1985, "On Tooth Contact Marking and Gear Performance (1st Report, Fundamental Characteristics of Tooth Contact Marking)," Transaction of JSME C, Vol. 51, No. 467, pp. 1559-1567. https://doi.org/10.1299/kikaic.51.1559
  3. Arai, N., Kawamoto, S., Yoneda, H., Hirogaki, T., and Mizumoto, K., 1991, "A Study of Spiral Bevel Gear (Analysis of Tooth Root Stress by Three Dimensional Finite Element Method)," Transaction of JSME, Vol. 57, No. 538, pp. 2114-2117. https://doi.org/10.1299/kikaic.57.2114
  4. Arai, N., Kawamoto, S., Hirogaki, T., Mizumoto, K., and Uenishi, Y., 1991, "Characteristics of Meshing in Spiral Bevel Gears (Comparison of the Gleason-type Gear with the Oerlinko-type Gear)," Transaction of JSME C, Vol. 57, No. 540, pp. 2703-2708. https://doi.org/10.1299/kikaic.57.2703
  5. Filiz, I. H., Eyercioglu, O., 1995, "Evaluation of Gear Tooth Stresses by Finite Element Method," Trans. of the ASME, Vol. 117, pp. 232-239.
  6. Tanaka, H., Ohkami, Y., 1997, "Estimation of Impact Force on a Space Vehicle based on an Inverse Analysis Technique," Transaction of JSME C, Vol. 63, No. 608, pp. 1172-1178. https://doi.org/10.1299/kikaia.63.1172
  7. Arora, S. Jasbir, 1989, Introduction to Optimum Design, McGraw-Hill, New York, pp. 125-131.
  8. Brebbia, C. A., Telles, J. C. F., and Wrobel, L. C., 1984, Boundary Element Techniques, Springer-Verlag, Berlin, pp. 153-180.
  9. Banerjee, P. K., 1994, The Boundary Element Methods in Engineering, McGraw-Hill, New York, pp. 87-99.
  10. James, H. K., 1994, Boundary Element Analysis in Engineering Continuum Mechanics, Prentice Hall, New Jersey, pp. 87-93.
  11. Park, S. O.,1994, "A Study for Mutual Interference between Circular Inclusion and Crack in Finite-Width Plate by Boundary Element Method," Transaction of KSME, Vol. 18, No. 6, pp. 1474-1482.
  12. Park, S. O., 2001, "Analysis of Spiral Bevel Gear by Inverse Problem," Transaction of KSMTE, Vol. 10, No. 5, pp. 85-95.
  13. Park, S. O., 2003, "Analysis of Torque on Spur Gear by Inverse Problem," Transaction of KSMTE, Vol. 12, No. 5, pp. 24-33.
  14. Park, S. O., 2008, "Evaluation of Stress Intensity Factor using Boundary Element Alternating Method," Journal of the Korean Soc. of Mechanical Technology, Vol. 10, No. 2, pp. 1-8.