1 |
Park, S. O., 2008, "Evaluation of Stress Intensity Factor using Boundary Element Alternating Method," Journal of the Korean Soc. of Mechanical Technology, Vol. 10, No. 2, pp. 1-8.
|
2 |
Arai, N., Kawamoto, S., Yoneda, H., Hirogaki, T., and Mizumoto, K., 1991, "A Study of Spiral Bevel Gear (Analysis of Tooth Root Stress by Three Dimensional Finite Element Method)," Transaction of JSME, Vol. 57, No. 538, pp. 2114-2117.
DOI
|
3 |
Arai, N., Kawamoto, S., Hirogaki, T., Mizumoto, K., and Uenishi, Y., 1991, "Characteristics of Meshing in Spiral Bevel Gears (Comparison of the Gleason-type Gear with the Oerlinko-type Gear)," Transaction of JSME C, Vol. 57, No. 540, pp. 2703-2708.
DOI
|
4 |
Filiz, I. H., Eyercioglu, O., 1995, "Evaluation of Gear Tooth Stresses by Finite Element Method," Trans. of the ASME, Vol. 117, pp. 232-239.
|
5 |
Tanaka, H., Ohkami, Y., 1997, "Estimation of Impact Force on a Space Vehicle based on an Inverse Analysis Technique," Transaction of JSME C, Vol. 63, No. 608, pp. 1172-1178.
DOI
|
6 |
Arora, S. Jasbir, 1989, Introduction to Optimum Design, McGraw-Hill, New York, pp. 125-131.
|
7 |
Brebbia, C. A., Telles, J. C. F., and Wrobel, L. C., 1984, Boundary Element Techniques, Springer-Verlag, Berlin, pp. 153-180.
|
8 |
Banerjee, P. K., 1994, The Boundary Element Methods in Engineering, McGraw-Hill, New York, pp. 87-99.
|
9 |
James, H. K., 1994, Boundary Element Analysis in Engineering Continuum Mechanics, Prentice Hall, New Jersey, pp. 87-93.
|
10 |
Park, S. O.,1994, "A Study for Mutual Interference between Circular Inclusion and Crack in Finite-Width Plate by Boundary Element Method," Transaction of KSME, Vol. 18, No. 6, pp. 1474-1482.
|
11 |
Park, S. O., 2001, "Analysis of Spiral Bevel Gear by Inverse Problem," Transaction of KSMTE, Vol. 10, No. 5, pp. 85-95.
|
12 |
Park, S. O., 2003, "Analysis of Torque on Spur Gear by Inverse Problem," Transaction of KSMTE, Vol. 12, No. 5, pp. 24-33.
|
13 |
Kubo, A., Ueno, T., Jin, J., Ariura, Y., and Nakanishi, T., 1985, "On Tooth Contact Marking and Gear Performance (1st Report, Fundamental Characteristics of Tooth Contact Marking)," Transaction of JSME C, Vol. 51, No. 467, pp. 1559-1567.
DOI
|
14 |
Arai, N., Harada, S., and Aida, T., 1981, "Research on Bending Strength Properties of Spur Gears with Thin Rim," Transaction of JSME C, Vol. 47, No. 413, pp. 47-56.
DOI
|