• Title/Summary/Keyword: 경계적분식

Search Result 9, Processing Time 0.018 seconds

The Calculation of Stress Intensity Factors in the Orthotropic Elastic Plate with the Cracked Circular-hole using a Contour Integral Method (경로적분법에 의한 원공크랙이 있는 직교이방성 탄성평판의 응력 확대계수 계산)

  • Kim, Jin-Woo
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.8 no.4 s.23
    • /
    • pp.136-145
    • /
    • 2005
  • 특이응력해석을 위한 일반화된 가역상반일 경계적분식이 섬유강화복합재를 모형화한 직교 이방성 크랙평판의 수치해를 위하여 발전시켰다. 이 적분방정식은 평판경계에서의 탄성변위와 트랙션의 변수로 구성된 경계적분식의 형태로 하중이 없다는 두 크랙면의 경계조건과 유한의 탄성변형에너지의 개념에서 경계적분식에 필요한 특성해를 규정하고 대응되는 보조해를 계산하였다. 대칭모우드 I형의 중앙원공크랙평판 및 복합모우드형의 반원편측크랙 일단고정평판의 응력확대계수가 임의의 섬유방향각에 따라서 계산되었다.

Proof of equivalence of solutions of boundary integral and variational equations of the linear elasticity problem (선형 탄성 문제의 경계적분식 해와 변분해의 동등성 증명)

  • 유영면;박찬우;권길헌
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.6
    • /
    • pp.1001-1004
    • /
    • 1987
  • In this study mathematical properties of variational solution and solution of the boundary integral equation of the linear elasticity problem are studied. It is first reviewed that a variational solution for the three-dimensional linear elasticity problem exists in the Sobolev space [ $H^{1}$(.OMEGA.)]$^{3}$ and, then, it is shown that a unique solution of the boundary integral equation is identical to the variational solution in [ $H^{1}$(.OMEGA.)]$^{3}$. To represent the boundary integral equation, the Green's formula in the Sobolev space is utilized on the solution domain excluding a ball, with small radius .rho., centered at the point where the point load is applied. By letting .rho. tend to zero, it is shown that, for the linear elasticity problem, boundary integral equation is valid for the variational solution. From this fact, one can obtain a numerical approximatiion of the variational solution by the boundary element method even when the classical solution does not exist.exist.

The Computation of Stress Intensity Factors in Fiberreinforced Composites using a Contour Integral Method (경로적분법에 의한 섬유강화복합재의 응력확대계수 계산)

  • 김진우;장흥석
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.1
    • /
    • pp.109-118
    • /
    • 1985
  • 특이응력해석을 위한 일반화된 가역상반일 경계분식이 섬유강화복합재를 모형화한 직교 이방성 크랙평판의 수치해를 위하여 발전시켰다. 이 적분방정식은 평판경계에서의 탄성변위와 트랙션의 변수로 구성된 경계분식의 형태로 하중이 없다는 두 크랙면의 경계조건과 유한의 탄성변형에너지 의 개념에서 경계적 분식에 필요한 특성해를 규정하고 대응되는 보조해를 계산하였다. 직교이방 도를 달리한 중앙크랙평판의 응력확대계수를 계산하여 기존해와 비교하였다. 또한 대칭모우드 I 형의 양측크랙평판 및 복합모우드형 편측크랙 일단고정 평판의 응력확대계수가 임의의 섬유방향 각에 따라서 계산되었다.

Calculation of Stress Intensity Factors Using Single-Layer Potential and Weight Function (Single-Layer 포텐셜과 가중함수를 이용한 응력강도계수의 계산)

  • 이형연;홍창선
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.19 no.4
    • /
    • pp.981-989
    • /
    • 1995
  • A new weight function approach to determine SIF(stress intensity factor) using single-layer potential has been presented. The crack surface displacement field was represented by one boundary integral term whose kernel was modified from Kelvin's fundamental solution. The proposed method enables the calculation of SIF using only one SIF solution without any modification for the crack geometries symmetric in two-dimensional plane such as a center crack in a plate with or without an internal hole, double edge cracks, circumferential crack or radial cracks in a pipe. The application procedure to those crack problems is very simple and straightforward with only one SIF solution. The necessary information in the analysis is two reference SIFs. The analysis results using present closed-form solution were in good agreement with those of the literature.

A Boundary Integral Approximation for Bending of Elastic Plates (탄성평판 굽힘문제를 위한 경계적분 근사해)

  • Kim, Jin Woo
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.5 no.4
    • /
    • pp.57-66
    • /
    • 2002
  • 본 연구는 굽힘 하중하에서 탄성평판 구조 해석을 위한 경계적분방법 구성을 주목적으로 하고 체계적인 모듈화시스템 개발의 첫 이론 부분을 확립하였다. 굽힘 문제에서의 4개의 고유변수인 처짐, 기울기, 굽힘모우멘트, 상당 전단력의 항으로 경계적분방정식을 구성하였다. 물리적인 의미를 갖는 두 새로운 핵함수 도입으로 구성된 이들 적분방정식은 경계요소 구성시 나타나는 특이거동의 문제점을 간단한 두 탄성해에 의해 정규화 시켰으며 수치 적분 과정도 Cauchy 주치 적분 수렴성에서의 특별취급과는 달리 효율적으로 일반화시켰다. 경계적분식의 수치해석방법을 서술하였으며 집중하중하의 비대칭문제의 근사수치해를 도시하였다.

Calculation of Stress Intensity Factors for a Thick Pipe Using Weight Function Method (가중함수법을 이용한 두꺼운 배관의 응력강도계수 계산)

  • Lee, Hyeong-Yeon;Lee, Jae-Han;Yoo, Bong
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.20 no.7
    • /
    • pp.2167-2173
    • /
    • 1996
  • An approximate weight function technique using the indirect boundary integral equation has been presented for the analysis of stress intensity foactors(SIFs) of a thick pipe. One-term boundary integral was introduced to represent the crack surface displacement field for the displacement based weight function technique. An explicit closed-form SIF solution applicable to symmetric cracked pipes without any modification of the solution including both circumferential and radial cracks has been derived. The necessary information in the analysis is two or three reference SIFs. In most cases the SIF solution were in good agreement with those available in the literature.

Analysis of linear viscoelastic problems using boundary element method (경계요소법을 사용한 선형 점탄성문제의 해석)

  • 심우진;곽병만
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.2
    • /
    • pp.322-330
    • /
    • 1987
  • Isotropic linear viscoelasticity problems are analyzed numerically in time domain by Boundary Element Method with quadratic isoparametric boundary elements. Viscoelastic fundamental solutions are newly derived by using the elastic-viscoelastic correspondence principle and corresponding boundary integral equations are also presented. Numerical results of two examples are compared with the derived exact solutions to verify the accuracy and validity of the method. A detailed study on the accuracy of displacement and stress in terms of time integration step is given.

Dual Reciprocity Boundary Element Analysis for the Graetz Problem in Circular Duct (원형 덕트유동에서의 Graetz 문제에 대한 이중교환 경계요소 해석)

  • Choi, Chang Yong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.23 no.2
    • /
    • pp.243-253
    • /
    • 1999
  • The dual reciprocity boundary element method (DRBEM) is used to solve the Graetz problem of laminar flow inside circular duct. In this method the domain integral tenn of boundary integral equation resulting from source term of governing equation is transformed into equivalent boundary-only integrals by using the radial basis interpolation function, and therefore complicate domain discretization procedure Is completely removed. Velocity profile is obtained by solving the momentum equation first and then, using this velocities as Input data, energy equation Is solved to get the temperature profile by advancing from duct entrance through the axial direction marching scheme. DRBEM solution is tested for the uniform temperature and heat flux boundary condition cases. Local Nusselt number, mixed mean temperature and temperature profile inside duct at each dimensionless axial location are obtained and compared with exact solutions for the accuracy test Solutions arc in good agreement at the entry region as well as fully developed region of circular duct, and their accuracy are verified from error analysis.

Analysis of Dynamic Behavior of Flexible Rectangular Liquid Containers by the Coupled Boundary Element-Finite Element Method (경계요소-유한요소 연계법에 의한 구형 수조구조물의 동적거동 특성해석)

  • Koh, Hyun Moo;Park, Jang Ho;Kim, Jaekwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.5
    • /
    • pp.1033-1042
    • /
    • 1994
  • Dynamic behavior of flexible rectangular liquid containers is analyzed by a two-dimensional coupled boundary element-finite element method. The irrotational motion of inviscid and incompressible ideal fluid is modeled by boundary elements and the motion of structure by finite elements. A singularity free integral formulation is employed for the implementation of boundary element method. Coupling is performed by using compatibility and equilibrium conditions along the interface between the fluid and structure. The fluid-structure interaction effects are reflected into the coupled equation of motion as added fluid mass matrix and sloshing stiffness matrix. By solving the eigen-problem for the coupled equation of motion, natural frequencies and mode shapes of coupled system are obtained. The free surface sloshing motion and hydrodynamic pressure developed in a flexible rectangular container due to horizontal and vertical ground motions are computed in time domain.

  • PDF