• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.29-39
• /
• 2014

In this study, model pile-load test with numerical analysis was carried out to compare and analyze pile behaviour according to interface properties. In the model test, Close Range Photogrammetry (CRP) was chosen to measure the ground deformation. In addition, model steel and concrete piles were used. Based on the model pile test, interface elements around the model pile were used to simulate the slip effect. Interface properties were adopted as interface reduction factor $R_{inter}$. Interface reduction factor, $R_{inter}$ plays a key role in the interface properties. Through this study, it was found that the model ground behaviour measured by CRP corresponded well to the one predicted by the numerical analysis. And, the interface strength reduction factor, $R_{inter}$ value of the steel pile was higher than that of the concrete pile.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.539-546
• /
• 2003

The numerical model of the flow analysis by finite element technique is described. The Galerkin method is employed for spatial discretization Two step explicit finite element scheme is used to discretize the time function, which has advantage in problems treating large numbers of elements and unsteady state. Two dimensional hydrodynamic model considering moving boundary condition is developed. Also it applied flow model which develop on flow portion of ideal fluid in the model flume and verified, and the results of this study confirm the efficiency of moving boundary treatment in Jeju harbor. The computed results have shown the good adaptability of moving boundary condition From these studies, it can be concluded that the present method is a useful and effective tool in tidal flow analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.853-861
• /
• 2015

In this study, FDM modelling with axisymmetry condition and interface element was verified whether it is reasonable to estimate compositive behavior of a piled raft foundation. To this end, the modelling validity of piled raft foundations was estimated by comparing and analyzing numerical analysis results and laboratory model test results. Also, load bearing ratio of a raft is analyzed by performing sensitivity analysis of foundation parameters with the actual field conditions. As a result of this study, correlation between bearing capacity and vertical displacement of numerical results turned out to be similar with that of a laboratory model test. In addition, ultimate bearing capacity of piled rafts and load bearing ratio of the raft is calculated to be similar in both cases. The load bearing ratio of the raft was also estimated to be in the range of 33% to 52% from the sensitivity analysis. The results were confirmed to be similar to the previous studies. Therefore, it can be inferred that piled rafts can be effectively modelled applying axisymmetry condition and interface element.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1475_1476
• /
• 2009

본 논문에서는 스트리머 방전에 대한 연구의 일환으로 전자사태의 발생과정 및 절연파괴현상을 2차원 유한요소법을 이용하여 해석하였다. 평행 평판 전극을 모델로 도입하고 전자밀도에 대한 경계조건을 변화시켜 각각 시뮬레이션을 통하여 신뢰성 있는 결과를 도출하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.92-98
• /
• 1998

This paper presents three boundary techniques which are useful for FEM analysis of composite laminates: 1) a rotational symmetric boundary technique . 2) a quasi three-dimensional boundary technique and 3) a contact boundary technique. The use of the rotational symmetric boundary technique is possible for a smaller FEM model. With the use of the quasi three-dimensional boundary tecnique. quasi three dimensional analysis of composite laminates can be performed on the conventional 3-D FEM program These techniques can readily be adopted to FEM programs.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.9-16
• /
• 1998

This paper describes how the directivity pattern of the scattered sound pressure is distributed when a plane acoustic wave is incident on a rigid or soft spherical shell underwater. A coupled Finite Element-Boundary Element method is developed as a numerical technique. The result of the coupled FE-BE method is agreed with theoretical solution for algorithmic confirmation.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.64-73
• /
• 1997

솔리드 모델러, 자동요소분할 기법, 4면체 특이요소, 응력확대계수의 해석 기능을 통합하여, 3차원 균열의 응력확대계수를 효율적으로 해석할 수 있는 시스템을 개발하였다. 균열을 포함하는 기하모델을 CAD 시스템을 이용하여 정의하고, 경계조건과 재료 물성치 및 절점밀도 분포를 기하모델에 직접 지정함으로써, 퍼지이론 에 의한 절점발생과 데로우니 삼각화법에 의한 요소가 자동으로 생성된다. 특히, 균열 근방에는 4면체 2차 특이요소를 생성시켰으며, 유한요소 해석을 위한 입력 데이터가 자동으로 작성되어 해석코드에 의한 응력 해석이 수행된다. 해석 후, 출력되는 변위를 이용하여 변위외삽법에 의한 응력확대계수가 자동적으로 계산되어 진다. 본 시스템의 효용성을 확인하기 위해, 인장력을 받는 평판내의 표면균열에 대해 해석하여 보았다.

• Water for future
• /
• v.20 no.4
• /
• pp.249-256
• /
• 1987

Wave forces on fixed two-dimensional objects submerged in water of finite depth were analysed by Boundary Element Method using linear elements.It is assumed that the wave forces may be described by linear theory and that incident wave direction is normal to the objects of infinite length. In this paper, wave forces on a bottom-seated half cross section pipeline, a circular pipeline, a submerged pipeline and submerged breakwater of arbitrary shape were studied. The accuracy of the computational scheme is investigated by comparing the numerical results with the existing laboratory results and analytical solutions of other researchers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.223-229
• /
• 2009

Most of structural analyses are concerned with the deformation and stress in a body subjected to external loads. In many fields, however, the interpretation of inverse problems is needed to determine surface tractions or internal stresses from measured displacements. In this study, the inverse processes by using the boundary element method are formulated for the evaluation of boundary tractions from displacements measured on a remote surface. Small errors in measured displacements often result in a substantial loss of accuracy of an inverse system. Numerical results show that the error in reconstructed tractions by using the inverse boundary element methods is sensitive to measurement location and noise.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.375-382
• /
• 2008

The particular integral formulation for two(2D) and three(3D) dimensional inelastic transient dynamic stress analysis is presented. The elastostatic equation is used for the complementary solution. Using the concept of global shape function, the particular integrals for displacement and traction rates are obtained to approximate acceleration of the inhomogeneous equation. The Houbolt time integration scheme is used for the time-marching process. The Newton-Raphson algorithm for plastic multiplier is used to solve the system equation. Numerical results of four example problems are given to demonstrate the validity and accuracy of the present formulation.