• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.485-492
• /
• 2021

In this paper, we propose the development of a defect inspection system for polygonal containers. Embedded board consists of main part, communication part, input/output part, etc. The main unit is a main arithmetic unit, and the operating system that drives the embedded board is ported to control input/output for external communication, sensors and control. The input/output unit converts the electrical signals of the sensors installed in the field into digital and transmits them to the main module and plays the role of controlling the external stepper motor. The communication unit performs a role of setting an image capturing camera trigger and driving setting of the control device. The input/output unit converts the electrical signals of the control switches and sensors into digital and transmits them to the main module. In the input circuit for receiving the pulse input related to the operation mode, etc., a photocoupler is designed for each input port in order to minimize the interference of external noise. In order to objectively evaluate the accuracy of the development of the proposed polygonal container defect inspection system, comparison with other machine vision inspection systems is required, but it is impossible because there is currently no machine vision inspection system for polygonal containers. Therefore, by measuring the operation timing with an oscilloscope, it was confirmed that waveforms such as Test Time, One Angle Pulse Value, One Pulse Time, Camera Trigger Pulse, and BLU brightness control were accurately output.

• Journal of KIISE:Databases
• /
• v.37 no.6
• /
• pp.300-307
• /
• 2010

According to growth of web, data processing technology is developing. In the Web of next generation, high-speed or high-volume data processing technologies for various wire-wireless users, USN and RFID are developing too. In this paper, we propose a high-volume data processing technology using Complex Event Processing(CEP) engine. CEP is the technology to process complex events. CEP Engine is the following characteristics. First it collects a high-volume event(data). Secondly it analyses events. Finally it lets event connect to new actions. In other words, CEP engine collects, analyses, filters high-volume events. Also it extracts events using pattern-matching for registered events and new events. As the results extracted. We use it by an input event of other work, real-time response for demanded event and can trigger to database for only valid data.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.986-998
• /
• 2003

A moving object management system manages spatiotemporal data o( moving objects which change their location continuously over time such as people, animals, cars, cellular phones, and so on. This system can be applied to location based services such as vehicle tracking systems, digital battlefields, and animal habitat management. The existing systems neither suggest location estimation of the moving objects nor handle the loss data of the moving objects in real-time environment. Thus the existing systems have problems that they give the uncertain results of the query processing to the user query. In this paper, we design a new moving object management system. The proposed system processes the past and future location information of the moving objects by the location change function. Also we propose a location triggering method, which supplements loss of the location data of the mobile objects in real-time environment. Finally, we implement and apply the proposed system to a vehicle tracking system based on PDA. Thus we ascertain that the proposed system can be applied to the location based system.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.388-400
• /
• 2006

There are wireless location acquisition technique, LBS platform technique, and LBS application technique in the important technical elements of the LBS. In this paper, we design a location data management system which is the core base technique of the important technical elements of the LBS. The proposed system consist of an application interface of LBS, a query processor of application. service, a location estimator of the moving objects, a location information manager, a real-time data receiver, and a database of location data. This system manages efficiently the location change information of the moving objects using the database technique, suggests some useful inform to the users of LBS, and supports operation and facility of location estimation to process continuous location data of the moving objects. On the basis of location data triggering, this system supplements the problem of the related location data management systems to complement the loss of location data in the environment of real-time.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.758-765
• /
• 2007

In this paper, we propose an efficient seamless handoff scheme to minimize packet loss and unnecessary packets on the Internet using the peculiar mobility characteristics of public vehicles such as trains. MR (Mobile Router) in a train visits each AR (Access Router) in the fixed order. As the MR detects reachability to the NAR (Next Access Router) on the new link, the PAR (Previous Access Router) can directly deliver packets from MR's HA (Home Agent) to the NAR according to the HML (Handoff Mobile router List). Then. the NAR buffers them until the MR finishes L3 (Layer 3) handoff procedure with the NAR. Therefore, our scheme can support a seamless handoff without the packet loss and unnecessary packets on the Internet. The result of our performance evaluation has shown that the proposed scheme could provide excellent performance, compared with the NEMO basic support protocol and the Bi-casting protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.377-386
• /
• 2008

In this paper, a new handover management scheme has been proposed to reduce handover latency and to support fast handover without packet losses, so that it may be applicable to the wireless mobile Internet system such as IPv6-based WiBro system. To minimize the handover latency in processing of movement detection, we propose the handover management scheme which simplifies the handover message exchanging procedure between mobile subscriber station (MSS) and network by integrating layer 2 and layer 3 handovers efficiently based on the layer2 information. To reduce the processing delay from new care-of-address (NCoA) configuration during handover, we propose that NCoA is created, distributed and managed by new access control router (NACR). In addition, in order to minimize the packet transmission delay and eliminate the packet losses, the proposed scheme employs a crossover router (CR) which is upper network located over PACR and NACR and employs the packet buffering for MSS. The simulation study shows that the proposed scheme achieves loss-free packet delivery and low latency in the environment of narrow overlapped cell area or high velocity of the MSS, comparing the performance with the conventional schemes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2020

We discuss the method of a high precision range trigger and generation for a high range resolution radar. To verify the designed range resolution performance, we use test-equipments which can absolutely make a precision range shorter than the desined range resolution. The accuracy of generated range is proportional to the system reference clock. However, the system main processor is limited to input reference clocks and a higher available one is expensive in the conventional method. To solve this problem, we proposed that the range trigger and generation method using multi-phase-shiftings and integration. Through a experiment, we verified that the proposed method made problems which can be ocurred in the conventional method clear.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.135-138
• /
• 1998

This paper describes the construction and experimetal results of prototype digital telesounder developed to monitor remotely the fish school entered in setnet. The telesounder consists of the sea station and land station. The former consists of an ultrasonic transceiving part of 50 KHz, a hand made 16 bits single board computer (SBC), and a RF MODEM of 9600 bps for data link. The SBC controls the trigger signal to transmit the ultrasonic pulse, maximum detection range, sampling rate in analog to digital converter and data link. The sampling rate of echo data was 80 ${\mu}$s. The later consists of a RF MODEM same as the former one and 486 notebook computer which displays the echogram and saves its raw data. The authors carried out some experiments to confirm the practical use of the telesounder. At results the echogram obtained on the land station is sufficiently good and clear to monitor the behavior of fish school in setnet.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.271-277
• /
• 2010

In this paper, a numerical model for a Kevlar/Epoxy and Carbon-Kevlar/Epoxy tube used as an energy absorbing component has been developed and then results have been verified through experiment. The 2D shell element and Chang-Chang failure criterion of LS-DYNA that is commercial explicit FE code was used. Mechanical material properties for the model were obtained by material testing in advance. The numerical results were compared with quasi-static test results under axial compressive loading at 10mm/min. From the results, in the case of the Kevlar/Epoxy tube, load-crushed displacement curves were very close to the experiments and SEA (specific energy absorption) shows a good agreement with experimental one within less than 6%. However, the Carbon-Kevlar/Epoxy tube shows some differences with the experimental results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.70-78
• /
• 2000

A novel capacitance deviation-to-time interval converter based on ramp-integration is presented. It consists of two current mirrors, two schmitt triggers, and control digital circuits by the upper and lower sides, symmetrically. Total circuit has been with discrete components. The results show that the proposed converter has a linearity error of less than 1% at the time interval(pulse width) over a capacitance deviation from 295 pF to 375 pF. A capacitance deviation of 40pF and time interval of 0.2 ms was measured for sensor capacitance of 335 pF. Therefore, the high-resolution can be known by counting the fast and stable clock pulses gated into a counter for time interval. The application of a novel capacitance deviation-to time interval converter to a digital humidity controller is also presented. The presented circuit is insensitive to the capacitance difference in disregard of voltage source or temperature deviation. Besides the accuracy, it features the small MOS device count integrable onto a small chip area. The circuit is thus particularly suitable for the on-chip interface.