• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.67-72
• /
• 2000

A lot of varIOUS studies are taking advantage of annular masks or various pupil filters to design optical systems such as a digital versatile disc (DVD) pick up head and precise scanning microscopy that have the superresolution beyond the diffraction limit. We considered both annular mask and pupil filter for the superresolution system. Since image quality is a function of annular width, position and modulation amount, we computel'lzed the optimized condition for the phase modulation and mvestigated the variation of lhe center peak: intensity for the phase modulated system From tills result, we were able to detenrune the best conditions for the annular apodizer, wluch give the maximum value of the center peak intensity_ We made especially sure that the phase modulated system have an excellent compensation for spherical aberration as it lllcreases. eases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.55-58
• /
• 1992

일반적으로 기계계 또는 기계요소가 외력을 받아 진동할 때 공진이 문제시 되는 경우가 많다. 이러한 계의 공진 제어에는 주로 댐핑재료(damping material)의 사용이 일반화 되어왔다. 그러나 댐핑재료를 사용한 제어에 있어 서는 계의 특성이나 규모등에 따라 많은 제한요소가 따르는데 특히 구조물 의 규모가 커지거나 복잡해지면, 제어 위치선정에도 어려움이 따르며 그 효 과도 기대하기 어렵다. 다른 방법으로는 기계계의 동적 특성치에 변화를 주 는 것이나, 이를 허용하지 않는 계가 많다. 따라서 이러한 단점들을 보완하 기 위해서 고안된 것이 동흡진기(dynamic absorber)이다. 기존의 선형 동흡 진기[1]는 주공진 부근영역에서 가진되는 계에만 적용이 가능하기 때문에, 흡진기와 기계계의 크기비(ratio)의 결정이 제한적이다. 이런 제한을 극복하 여 비교적 넓은 범위의 가진 주파수에 대해서 최대의 응답을 최소화하기 위 해서는 비선형 동흡진기[5]의 해석이 요구되고 있다. 제어대상의 최적응답을 얻기 위해 흡진기의 크기를 변화시키는 과정을 tuning이라 하는데, 이 과정 을 통해 최적의 감쇠값을 결정할 수 있다. 비선형 흡진기의 장점은 tuning 과정시 비선형 파라미터 변화에 의해 제어가 가능한 영역을 확장할 수 있다. 따라서 본 연구에서는 동흡진기의 tuning 과정시 흡진기의 크기비와 비선형 파라미터비에 따른 효과를 정규모우드를 활용하여 고찰한 후, 최적의 응답을 통해 비선형 동흡진기의 동적 거동을 연구하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.56-61
• /
• 2011

Many control techniques have been proposed in order to improve the control performance of the control system. The degree of freedom on control in the control system is decided by the number of the closed-loop transfer function which can adjust independently. The controller design scheme with two degrees of freedom(TDOF) is extensively used for securing the good control performance to trace a desired value and reject disturbance. In this paper, PID controller is used by controller with TDOF and the design method for control system with TDOF is proposed by the normal method. Using the coefficients of the transfer function of the plant, the transfer function of the control system is normalized by the proposed design method and the parameters of the controller are determined. The control system with the TDOF is constructed by using this method. Through the simulation results, the usefulness of the proposed algorithm is proved.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.55-62
• /
• 1994

Co(A $I_{1- X}$C $u_{X}$ ) (0$\leq$0.40)합금계의 결정구조 및 자기적 특성을 X-선 회절분석기, 주사전자현미경 그리고 진동 시료형 자력계를 이용하여 조사하였다. X-선 결정구조 및 상분석 결과, 전조성 범위에서 주상은 격자상수가 약 2.86$\AA$인 규칙화한 B2(CsCI)구조를 가지고 있었으며, x $\geq$0.10범위에서는Cu함량이 많은 제 2상이 존재하였고 격자상수가 약 3.63$\AA$인 FCC 구조이었다. 자화측정결과 x $\geq$0.25범위에서는 강자성, x$\leq$0.10에서는 상자성 그리고 x=0.15, 0.20에서는 초상자성의 특성을 나타내었다. Cu함량(x)이 증가함에 따라 자화값은 증가하는 현상을 보여주었다. 본 합금계의 측정한 분자당 스핀자기 모멘트 값은 국부환경모델을 이용하여 각 조성에서 계산된 Co원소에 대한 스핀자기 모멘트 값과 잘 일치함을 보여주었다.다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.29-39
• /
• 1997

The need of transformation parameters from local geodetic datums to a geocentric coordinate system is becoming more common, with the increasing application of satellite positioning techniques to LIS/GIS survey with cadastral management. In this paper, the national transformation parameters between the Korean geodetic coordinates which is based on the Bessel 1841 ellipsoid and the WGS84 ellipsoid are determined by the least square methods with weighted parameter constraints. Three-dimensional geocentric coordinates are based on GPS observation at 31 stations in the geodetic network, the datum parameters are computed within a standard deviation of less than 1 meter. In South Korea, the national transformation parameters with Bessel geoid-heights are useful for GPS baseline processing and for middle-scale map/database transformation.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.149-157
• /
• 2018

One of the purposes of radiation protection is to minimize stochastic effects. PCXMC 2.0 is a Monte Carlo Simulation based program and makes it possible to predict effective dose and the probability of cancer development through entrance surface dose. Therefore, it is especially important to measure entrance surface dose through dosimeter. The purpose of this study is to measure entrance surface dose through semiconductor dosimeter, general dosimeter, glass dosimeter, and to compare and analyze the effective dose and probability of disease of critical organs. As an experimental method, the entrance surface dose of skull, chest, abdomen was measured per dosimeter and the effective dose and the probability of cancer development of critical organs per area was evaluated by PCXMC 2.0. As a result, the entrance surface dose per area was different in the order of a general dosimeter, a semiconductor dosimeter, and a glass dosimeter even under the same condition. Base on this analysis, the effective dose and probability of developing cancer of critical organs were also different in the order of a general dosimeter, a semiconductor dosimeter, and a glass dosimeter. In conclusion, it was found that the effective dose and the risk of diseases differ according to the dosimeter used, even under the same conditions, and through this study it was found that it is important to present an accurate entrance surface dose model according to each dosimeter.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.87-91
• /
• 1997

서로 다른 씨클로펜타디엔 유도체가 ${\pi}$-결합된 최초의 비스무스 화합물인 ${\eta}^5-C_5(CH_3)_5Bi({\eta}^5-C_5H_5)_2$이 디펜타메틸씨클로펜타디에닐 비스무스디메틸아미드 $Cp{\ast}_2BiNMe_2[Cp{\ast}=C_5(CH_3)_5]$와 씨클로펜타디에닐 모노머와의 반응으로 합성되었다. 반응조건은 에테르 용매하에 -78$^{\circ}C$ 반응온도 조건하에서 얻어졌다. 합성된 반응물을 노르말 헥산 용매에서 재결정시킨 결과, 검은색 결정이 60% 수율로 얻어졌다. 그리고 재결정시킨 반응물을 190K에서 X-선 단결정 구조 분석 방법에 의해 그 구조를 밝혔다. 그 결과 결정계의 격자계는 I2/a, a=1756.00 picometer, b=906.00 picometer, c=2211.00 picometer, ${\beta}$=104.04, Z=8로 확인되었다. 여기서 a, b, c는 결정�Ю� 상수이고, ${\beta}$는 결정격자 상수인 b와 c간의 각도이며, Z는 단위 결정 격자당 분자의 갯수이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2011

To visualize a strategic plan including resource allocations and standardization schedules, it is important to set priorities among information and communication technologies(ICTs) standardization work areas(SWAs). This ranking process involves decision making process with multiple criteria which results a complex selection problem. In this study, analytic hierarchy process(AHP) is employed and applied to solve this decision making problem. The processes and results are illustrated for an effective strategic plan in standardization decision processes.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.194-200
• /
• 2000

The diffusion coefficients in polyimide/N-methyl-2-pyrrolidone (NMP) systems were proposed using tile Vrentas-Duda's hole free volume theory. Several free volume parameters included in the diffusion coefficients were obtained from the fundamental physical properties of polyimide and NMP and group contribution theory, and the pre-exponential diffusion coefficient, D$_{0}$ was also determined from the dynamic swelling behavior of polyimide in NMP solution. The experimental swelling behavior of polyimide films in NMP was well described by the theoretical one using the proposed diffusion coefficient.t.