• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.83-90
• /
• 1999

제어이론분야에서의 발전은 그러한 이론을 다방면으로 응요할 수 있는 분야를 더더욱 폭넓게 제공해 주고 있다. 자동화와 관련된 분야뿐만 아니라, 건축 및 토목분야에서도 고도의 제어어이론을 응용한 예를 쉽게 접할 수 있게 되었으며, 지진동에 의한 구조물의 진동을 억제하려는 방책이 그 ??ㅣ다. 이에 관한 많은 연구에서도 알 수 있듯이, 일반적으로 구조물의 수학적 모델에만 의존하여, 즉 구조물의 설계파라미터는 이미 설계되어져 있다는 가정하에 제어계를 설계하고 있다. 그러나 이러한 설계법에 있어서는 설계자로 하여금 구조물의 설계파라미터를 조정할 수 있는 자유도는 전혀 주어지지 않게 되며 단지 제어계의 파라미터를 조정하는 자유도만 허용된다. 이러한 문제점을 극복하기 위해 구조계 및 제어기의 설계파라미터를 동시에 조절할 수 있는 자유도가 허용되는 '구조계/제어계의 동시 최적화' 기법이 있다. 따라서 본 논문에서는 교량의 주탑 및 해양구조물 등의 진동제어 문제에 이러한 설계기법을 이용하여 주어진 설계사양을 만족하도록 구조계 및 제어계의 파라미터를 최적화 한다. 특히 본 논문에서는 제어계 설계 문제에 있어서의 일반적인 경우를 고려하여 상태의 일부가 관측된다고 가정하고 출력피드백의 경우에 대해 고찰하고 있다. 이때의 설계사양은 선형행렬부등식(LMI)으로 주어지며, 실험을 통하여 본 논문에서 소개하는 설계기법의 유효성을 검증한다.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.65-78
• /
• 2018

In As urban apartment are aging, the necessity of reconstruction or remodeling to extend the life of buildings is increasing. In such a case, a co-housing association is formed to implement decisions on reconstruction or remodeling projects. At this time, the most important thing for the co-housing association is the business feasibility based on the input of the construction cost.In the case of reconstruction, it is possible to estimate the construction cost by using the accumulated construction cost data, and then evaluate the feasibility using the construction cost. However, in case of remodeling, it is difficult to calculate the accurate construction cost because the number of accumulated construction cost data is small. In addition, non-specialist clients often require estimates of various design factors, often negatively impacting the accuracy of estimates and the duration of estimates. Therefore, in this study, proposed method to reflect the opinion of the owner who is a non-expert, as a design element, and a method of calculating the expected construction cost according to the design element, and constructed this system so that it can be easily used by the non-specialist owner. In order to clearly reflect the requirements of the non-specialist owner in the estimates, extracts the design elements from the existing remodeling cases, classify them, and suggest a plan for the client to choose. In order to reflect the design factors to the estimates, the existing apartment house remodeling cases were investigated and the design factors were extracted to have a large effect on the construction cost. Finally, developed system based on MS Excel so that the above contents can be easily used by a non-specialist client. In order to verify the accuracy of the proposed estimate in this study, verified the accuracy of 80% of the results by substituting the case of remodeling quotations and obtained a positive result from the questionnaire survey to examine the ease of use of the non-specialist customer. In this study, propose an estimate estimation method using four cases. If the remodeling cases are accumulated continuously, the expected effect of this study will be higher.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.32-46
• /
• 2017

Recent rapid urban expansion and crowding of various industrial facilities has affected the features of a significant part of downtown area, resulting in areas having buildings with a wide range of height and the foothills. To compute a velocity pressure exposure coefficient, namely the design wind speed factor, this study defines ground surface roughness by utilizing concentration analysis for the height of each building. After obtaining spatial data by extracting a building layer from digital maps, the study area was partitioned for the concentration analysis and to allow investigation of the frequency distribution of building heights. Concentration analysis by building height was determined with the Variation-to-Means Ratio (VMR) and Poisson distribution analysis using a buildings distribution chart, with statistical significance determined using Chi-square verification. Applying geographic information systems (GIS) with the architectural information made it possible to estimate a velocity pressure exposure coefficient factor more quantitatively and objectively, by including geographic features, as compared to current methods. Thus, this method is expected to eliminate inaccuracies that arise when building designers calculate the velocity pressure exposure coefficient in subjective way, and to help increase the wind resistance of buildings in a more logical and cost-effective way.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.627-636
• /
• 2023

Due to the COVID-19 pandemic, the global population has experienced drastic changes, one of which is the increase in remote work. Given the ongoing possibility of exposure to infectious diseases and various other circumstances, the expansion of remote work is anticipated. To enhance the efficiency of remote work and address its existing limitations, this study surveyed the perceptions of indoor environments among individuals who worked from home during the COVID-19 pandemic. The study examined how the characteristics of individuals influenced their perceptions of indoor environments. It was found that the number of occupants and rooms, size of the house, and noise sensitivity affected the perceptions of outdoor noise, neighbor noise, and indoor noise caused by cohabitants. The findings can be used as foundational data for designing multipurpose housing that can be utilized not only for residential purposes but also for work and educational settings in the future.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.295-303
• /
• 2018

In the DBB delivery system, the design stage and the construction stage are separated. Because of this, design changes frequently occur, and problems such as construction cost overrun, schedule delay, and quality deterioration happen as well. Recently, in the construction industry CM at Risk(CM@R) delivery system, which can systematically solve the above-mentioned problems of DBB delivery system, meet various demands of clients, and overcome the limited cost and period. In the CM@R delivery system, the contractor negotiates for a maximum guaranteed price(GMP) with the client at the design stage, and the CM performer carries out the construction within the GMP. However, uncertainties are inherent in the GMP calculation because the calculation is based on unfinished drawings and documents. In this study, a Probabilistic Earlier GMP Calculation Method by combining a probabilistic tool of Monte Carlo simulation with a case based reasoning is proposed so that the uncertainty in GMP calculation is reflected. After the earlier GMP is calculated, a process to calculate the $2^{nd}$ GMP at the time of around 80 % of detailed deign and to negotiate with the client to fix the final GMP is proposed. The Probabilistic Earlier GMP Calculation Method is verified through the case study. In this study, researchers set the range of GMP through the proposed probabilistic GMP calculation and tried to reduce the risk through negotiation between the client and the CM performer. The proposed method and process would contribute to the successful introduction of CM@R in Korea.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1307-1310
• /
• 2012

최근 도시화가 급격히 진행되면서 도심 공간의 효율적인 이용을 위하여 지하공간의 개발이 새로운 대안으로 주목 받고 있다. 지하공간은 일반적으로 건축 구조상 자연채광의 유입이 불가능한 구조로서 지하 거주자의 심리적, 환경적 문제를 초래하므로 이의 활성화를 위해서는 공간의 질적 제고가 선행되어야 한다. 빛과 조명은 공간의 질을 결정하는 중요한 요소로서 거주자를 위해 건강하고 편안한 환경을 제공하기 위해서는 거주자의 생체리듬과 부합하는 자연광과 유사한 광 환경(색온도, 조도) 서비스를 제공해야 한다. 본 논문은 지하공간을 대상으로 인공조명의 광 환경을 시간의 흐름에 따라 변화하는 자연의 빛과 유사하게 서비스하기 위한 LED제어시스템을 개발한다.

• Industry Promotion Research
• /
• v.6 no.4
• /
• pp.31-38
• /
• 2021

This study analyzed the non-cognitive domains (self-management competency, interpersonal relations competency) and cognitive domains (physical communication competency, comprehensive reasoning ability) among K-CESA for college students in the Division of Architecture at 𐩒𐩒 University and construction company workers, after which a training program for college students was designed. A K-CESA diagnostic evaluation was conducted on 25 construction company workers and 36 students in the senior and junior years of the division of Architecture. To identify the discrepancies among the two groups, "One-way ANOVA", a mean difference test, was performed and the Scheffe verification system was conducted as an after-measure. The empirical analysis of this study was verified at the significance level p <.05, and statistical processing was analyzed utilizing the SPSS WIN. 23.0 program. The major findings are as follows: first, the significant point of difference between the college students and construction company workers were located in five skills (goal-oriented planning and execution skills, cooperative skills, intervention skills, leadership skills, speaking skills, analytical reasoning skills); second, the education program was developed to improve the goal-oriented planning, execution ability and analytical reasoning ability through the expert-required analysis and study research. Through follow-up studies, I suggested that there is a need to develop courses that compare the competencies of various majors and workers in public institutions, corporations and other organizations.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.727-734
• /
• 2005

High-rise residential buildings these days tend to adopt a building frame system as primary earthquake resisting structural system for some architectural reasons. But there exist several ambiguities in designing such building frame systems according to current codes with regards to : the effective stiffness property of RC cracked section in static and dynamic analyses, analytical model to evaluate story drift ratio, and deformation compatibility requirements of frames. The comparative study for these issues by appling KBC 2005 to a typical building frame system shows that demands of member strength and story drift ratio can be different significantly depending on engineer's Interpretation and application of code requirements. And a building frame system can be noneconomical, compared with the dual system, because of higher demands on strength or ductility in both frames and shear walls.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.451-458
• /
• 2014

This study is a practical research for setting a process of making references of design decision and guidlines of limitation in the movement from the design development to the construction design by StrAuto. StrAuto, as a parametric modeling and optimization tool for building structure, enables a quantity of design cases to be analyzed automatically by changing parameters of sturctural properties. So the designer using StrAuto can check a lot of analysis data crossing thousands of cases, see which case is out of acceptable range, and make a decision for design and optimization. In this thesis, the application of StrAuto optimization process to the residence tower UIC project shows the practical applicability in the construction design and value engineering. StrAuto optimized ideally volume of core walls by 31.3% and lead the final revised model applied to the construction design to reduce volume by 18.1%. The significance of this research is the implementation of process that the designer can quickly review a number of cases and get a direction for construction design and optimization after design development.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.156-163
• /
• 2008

Recently, Construction market is contracted by economic slump and regulation. As the solution of this plan, construction productivity is gathering strength. However, the study on the productivity in construction section is insufficient until now. Construction section has many factor about productivity. The point of this study, we analysis the factor of construction productivity improvement and relationship with system thinking. And we show the strategy of construction productivity improvement.