• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.46-58
• /
• 2022

This study analyzed the documentation trend of garden components such as plants, infrastructure, unit facilities, and structures, based on 188 measurement drawings of 94 old houses in a report on the documentation of the national folklore cultural heritage. The findings are as follows. First, it was found that plants and structures continuously appeared as the subject of measurement drawings, while infrastructure was often omitted. It was confirmed that unit facilities, which are smaller than other components, were frequently excluded from the documentation subject as well due to frequent changes such as movement, loss, and expansion. Second, the level of expression in measurement drawings showed different aspects for each component. The unit facilities showed a large change over time with respect to the level of documentation, and the level of documentation was somewhat polarized, particularly toward the latter stage. This suggests that the level of documenting the drawings limited to specific facilities improved, but the overall level of drawings did not improve, such as a lack of diversification of expression techniques suitable for various unit facilities. On the other hand, it was confirmed that the level of documenting the drawings for plants, infrastructure and structures did not change to a significant degree, implying that no improvements were made to the expression of components. Third, as for the technique of detailed expression, in the case of plants, vegetation status was prepared without distinction of old or protected trees that have historical value. Above all, there was no record of the vegetation structure that could help grasp the vegetation landscape of the outer area. As for the infrastructure, there was no consistent expression technique to systematically convey topographic changes such as the height and slope of the land. In addition, since there was no subtype classification defined for unit facilities and structures, there was no subject or method of documentation. This study is meaningful in that it expanded the category of documentation, which has been concentrated on buildings in old houses, to gardens, and called attention to the need for documenting the gardens for the preservation and management of old houses as an integration of the building and outer area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.725-730
• /
• 1994

2차원 도면으로부터 3차원 입체형상으로의 재구성은 CAD/CAM에서 많이 연구되어 온 분야이다. 이 논문에서는 건축에서 쓰이는 3점 소실법을 이용하여, 자유곡선을 포함하는 하나의 투시도로부터 3차원 정보를 추출하고, 그 위상학적 관계와 loop detection 알고리즘을 통해서 면정보를 추출한다. 추출된 면정보를 입체 구조로 변환하고 연속성을 부여한다. 그리고 쉬운 사용자 인터페이스를 제공하여 사용자의 의도에 맞는 적절한 입체영상을 만들어 내고자 하였다.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.12-20
• /
• 2015

After the great King Munmu constructed Donggung-palace and Wolji-pond in 674, original landscape could not be estimated due to lack of related materials for some 1,250 years until it was surveyed in 1922. Accordingly, the study, to estimate changes of Wolji-pond landscape more accurately, analyzed the study of Hara(1932) and pictures in the Japanese ruling period etc. - these had not been studied so far. The study results are as follows. As a result of comparing survey maps of 1922 and one of 1975, it was found that during 53 years, whole area excluding island showed eroded part by 2~4m, severely, there was mounding area which was lowered by 10m. And it was identified through survey map of 1922 and pictures of the 1950's that inside southern shore protection of the No. 1 construction site were many landscape-stones(景石) which can make imagine a hill; here was water path. Trace of such path etc. remained just before excavation. 2) The construction site No. 3 and 5 in peak shape were higher than construction site No. 1, 2, and 4. Accordingly, there is high possibility that construction stood on high stylobate. So it is wrong that construction site No. 3 and 5 are restored in same height as other construction sites. Comprehensive restoration basic plan made in 2012 was also wrong. As a result of estimating changes of landscape through pictures before excavation of Wolji-pond, the author could identify changes of landscape in mound area and pumice stones which showed much changes in drawing. The study has limit due to lack of space. But if more pictures can be analyzed, it could further help for estimating original landscape of Wolji-pond.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.5
• /
• pp.52-60
• /
• 2019

The APR1400 is a 1400MWe nuclear power plant developed through national technology development project over a period about 10years. Approximately 65,000 design drawings are produced for APR1400 construction. In order to maintain consistency among numerous drawings, the highest level of design bases drawings (DBDs) are created according to design bases and this is used in the subsequent design. However, DBDs are produced and managed on a document basis and they are managed various field, it was difficult to accurately reflect the design bases information in the subsequent design. Therefore, this study recognizes limitations of the document based DBDs and develops a system that can accurately reflect the design bases information to subsequent design by adopting BIM based design bases integrated information system. Especially, by introducing DBIL(Design Bases Information Layer) concept, DBIL was created and analyzed based on five design bases(Physical protection, Fire protection, Internal missile protection, Internal flood protection, Radiation protection) applied to APR1400. In the final result DBIL set and Datasheet are integrated of room, design bases information, building data(wall, slab, door, window, penetrations). So it can be used for subsequent design automation and design verification. Furthermore, it is expected that APR1400 DBILs data can be used extensively in constructability and design economics analysis through comparison with next generation nuclear power plant.

• Journal of architectural history
• /
• v.24 no.1
• /
• pp.7-16
• /
• 2015

The purpose of this study is to identify ways of remodeling from the traditional hanok to the modern local governmental facility in 1910s. Analysing architectural drawings in the National Archives of Korea, 58 hanok remodeling cases of 52 facilities were verified like the provincial office, county office, county court from 1907 to 1910s. Using hanok as the local governmental building, exterior walls were all changed to the scaled-wooden wall like one of western-wooden building in 1910s and the western-style entrance was set. Change of the plan caused by remodeling interior walls had an intention of the centralized closed plan. Remodeled semi-outer corridor using the space of the eave became changed to the inner corridor with expansion of space. Expansion of hanok for spatial demand was in three ways. First was the expansion towards the eave space, second was direct extension from hanok, and last was the use of external corridor to the new building. Using the eave space was simple but had limitation of space, it was planed with other expansion ways. The way of direct extension was usually used than the one with the corridor, because it was more economical way.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.293-300
• /
• 2017

The purpose of this study is to analyze the various cinematic gaze and its realization through Seojong MA-Residence in Yangpyeong-gun, completed in 2016. This paper will focus on what kinds of cinematic concepts and design ideas were selected and considered in the stage of concept design, then how the site plan, floor plan, elevation and section design were developed in the stage of schematic design, and finally how much of the design intentions were successfully realized to the residential building. Architectural sketches, physical models and drawings at the concept & schematic design stage were reviewed. After the construction, some important issues were successfully realized such as interesting cinematic views to outside, visual openness and inflow of sunlight.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.121-132
• /
• 2019

Purpose: This study aims to analyze the meaning of architectural space of Alvar Aalto, which is based on architectural theories of periodic flows and the form of the space with the various elements applied to the works. Method: It analyzes the interrelationships of light, form and material in triangular composition by synthesizing the architectural vocabulary of Alvar Aalto from the viewpoint of modernism. Results: The architectural works of Alvar Aalto are centered on the combination of light, form, material, and space diversity, emphasizing social awareness and linking the human scale with the building environment. Conclusion: The structure of the Alvar Aalto is a synonym of nature and culture, society and individuals, standardization and diversity, universality and locality, intellectual and emotional, scientific and human psychological. It is possible to apply reciprocity elements to architectural spaces in a comprehensive manner while being different from each other in terms of rationality and immediacy.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.415-424
• /
• 2020

Recently, the elevator industry in Korea has been divided into the high speed elevator market and medium-low speed elevator market, and SMEs are making rapid progress in the medium-low speed fields. Usually, since the elevator manufacturer receives an order for installation after the construction of the building structure, it is necessary to promptly create a optimal elevator model and layout drawing in an earlier stage of sales activity due to the limited time to elevator installation. This study analyzes the sale and design works of the elevator SMEs, examines the areas that can be efficiently improved, and integrates the preceding our studies from the viewpoint of efficiency improvements at sales and design business process in the elevator industry. After that, we proposed an integrated framework of sales and design process for the elevator SMEs industry, and developed a prototype software system for automating the creation of optimal elevator model, layout drawing of elevator and BOM(Bill Of Material) list.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.81-89
• /
• 2014

Investigation results on shear connections design procedure which is conducted in Korea show that there are many communication problems between structural engineer and detailer, and there are unnecessary work procedures. To solve conventional connection design procedure problems, improved shear connection design procedure is suggested. Most of suggested design procedure is controlled by structure engineer, and the introduction of connections standardization makes computer aided design possible. Standardized connection details are satisfied with structural safety and constructability, and it improves design efficiency. Many problems which are caused by conventional design procedure are fundamentally blocked by using suggested design procedure.

• Korean Institute of Interior Design Journal
• /
• no.8
• /
• pp.44-57
• /
• 1996

Now interior designers have to meet this challenge by rising to the occasion and taking advantage of opportunities while strengthening their skills which have not kept pace with the increasing emphasis on design. furthermore, they are hampered by the lack of a general working design methodology. Interior designers in Korea have been slow to recognize the need for developing a specification methodology manual which could be adapted to meet varying requirements and modified to reflect designers experiences. The design process in Korean interior design often involves utilizing drawing document methods based on architectural prototypes rather than upon drawing methods developed by design firms as a result of work experience s and unique needs. However, these unique nees are nearly always limited by traditional working drawing methods. This has led to confusion and inaccuracies due to the lack of a single starndardized and universally acceptable working drawing methodology which is capable of reflecting the needs of all parties involved , partiality those of interior designers. This thesis is an attmepted to establish the necessity for developing a better working drawing methodogoy or technical mans of satisfying the information sorting and processing need s of interior design professionals, a five step suggestion for developing such a methodology follows. First, arrange pertinent design research information by means of a process which can be employed throughout the design process, from inception through to working drawing stage. The end result should be an interior architectural design process culminating in a pattern skillfully blending architecture, vision and product with environment . The design process should be manifested into a series of definable steps and yet sufficiently flexible and variable in order to provide the most apropos design solution. Secondly , motify the design methodology systematically according to site conditions and prevailing construction technology and manifest the design process in a booklet form so that it reflects a desired pattern. Thirdly, this methodology should incorporate a stand-ardized and functional process capable of being utilized to impact clear design concepts and objectives with preci-sion and efficiency in a manual form.