• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.108-115
• /
• 2017

We report the assembly procedure and performance evaluation of a visible and near-infrared spectrometer in the wavelength region of 400-900 nm, which is later to be combined with fore-optics (a telescope) to form a f/2.5 imaging spectrometer with a field of view of ${\pm}7.68^{\circ}$. The detector at the final image plane is a $640{\times}480$ charge-coupled device with a $24{\mu}m$ pixel size. The spectrometer is in an Offner relay configuration consisting of two concentric, spherical mirrors, the secondary of which is replaced by a convex grating mirror. A double-pass test method with an interferometer is often applied in the assembly process of precision optics, but was excluded from our study due to a large residual wavefront error (WFE) in optical design of 210 nm ($0.35{\lambda}$ at 600 nm) root-mean-square (RMS). This results in a single-path test method with a Shack-Hartmann sensor. The final assembly was tested to have a RMS WFE increase of less than 90 nm over the entire field of view, a keystone of 0.08 pixels, a smile of 1.13 pixels and a spectral resolution of 4.32 nm. During the procedure, we confirmed the validity of using a Shack-Hartmann wavefront sensor to monitor alignment in the assembly of an Offner-like spectrometer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.282-288
• /
• 2017

In this paper, GaAs/AlGaAs multi-layer structure was grown by liquid phase epitaxy with graphite sliding boat, which can be used as a device structure of a photocathode image sensor. The multi-layer structure was grown on an n-type GaAs substrate in the sequence as follows: GaAs buffer layer, Zn-doped p-type AlGaAs layer as etching stop layer, Zn-doped p-type GaAs layer, and Zn-doped p-type AlGaAs layer. The Characteristics of GaAs/AlGaAs structures were analyzed by using scanning electron microscope (SEM), secondary ion mass spectrometer (SIMS) and hall measurement. The SEM images shows that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure was grown with a mirror-like surface on a whole ($1.25mm{\times}25mm$) substrate. The Al composition in the AlGaAs layer was approximately 80 %. Also, it was confirmed that the free carrier concentration in the p-GaAs layer can be adjusted to the range of $8{\times}10^{18}/cm^2$ by hall measurement. In the result, it is expected that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure grown by the LPE can be used as a device structure of a photoelectric cathode image sensor.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.407-427
• /
• 2015

This thesis is research about the development and application of the panorama image in contemporary artwork, focusing on sculpture and installation. The samples of artworks are a selection of representatives from numerous examples of works that cannot be introduced without exceeding a reasonable scope of the thesis. A brief outline of the historical concepts of the perspective will describe the development of the panorama in itself. Some technical explanations and the practical use of the panorama with its link to 3-dimensional applications should bridge the explanation gap between the 2nd and 3rd dimensional usage of the panorama in contemporary artwork. Furthermore, some philosophical statements are proposed in the discussion. One of the main interests and initial motivation of this study was my personal believe that there is always a relationship between social philosophical values and the way a society sees or encounters visual structures. In other words the contemporary understanding of space and perspective is mirroring the actual zeitgeist and creates an exemplary visual aesthetics.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2002

The 'hands-on' craftsmanship of the 20th century has came and gone. Today, we are dealing with whole new, 'cerebral approach,' to concept and design with this new approach, design and function are very much dependant upon planning, sales, promotion, and the formative technique of the design industry. The innovative process of design constantly change as it reflects the needs and wants of society. It is and industry that constantly change as it reflects the needs and wants of society. It is and industry that constantly remakes and reshapes itself to suit current trend and outlook. The current idea being that consumers are looking for quality over quantity. Due to the 20th centuries dominant philosophy of functionalism, production intended to standardize the individual's purchasing choice. Aesthetic, or philosophic qualities played a second fiddle to the functional bias of a product, With production, Marketing, and research and development are integrated into the management process. This translates as good which include efficiency, quality, durability, and credibility an trademark and style. There is a definite 'post-modernist' movement and style in 21st century. Every possibility is available as the old boundaries of the 20th century are laid aside. There is a new, transformative quality to the current paradigm of design. The old "should" and "should not" of design no longerapplies. The integrated rative of design solves the usual disparity between aesthetic qualities and production. Design and profirability need not be stranger to one another. It can differentiate the image perceived of both enterprises and consumers by making use of integrated goods services. With an integrated system. both producers and designers win. While design gets full access to design in turn. All consumers make decisions based upon the evaluation of quality, service, and image ; even though it may not be a conscious decision to do so. Consumers are fully integrated human beings ; therefore producers who apply the new, integrated paradigmatic approach to concept, design, and production will reap the harvest of making a true relationship with individual buyer.

• Journal of Korean Philosophical Society
• /
• v.115
• /
• pp.249-279
• /
• 2010

The Law of the Heart, which appears in the chapter "B. The Actualization of Rational Self-consciousness Through its own Activity" in Hegel's Phenomenology of Spirit represents that the self-certainty of the reason may be the another face of the Madness. The Reason's indubitable certainty is the testimony of the truth for Descartes, and it also plays a role as the moral maxim of the conscience for Kant. But this subjective certainty unavoidably leads to the Madness of self-conceit, which unifies the consciousness and the reality ignoring the difference between them. The typical attitude appearing in the reformer like Don Quixote and also romantic idealists reveals the fact that modern reason and the psychosis can be both faces of one and the same coin. The Mirror Stage, the Imaginary, and the Formula of the Desire in Lacan's Theory shows that the Image of completeness is the result of Mis-understanding. Even if the Mirror stage is necessary for the Formation of the subject, at the same time it should also lead to the next stage, i.e., the Symbolic Order. It is considered as the realm of the Otherness, which refers to the realm of language or that of law. If the Ego can't go through the symbolic castration acted on by the Name of the Father, he will be remained in the prison of the Imaginary. The Madness also shows the similar process. For Hegel the Discipline of the Labor or the Death as absolute Otherness that inevitably delays the Desire plays the same role as the name of Father. It may be the experience of Separation or that of Sublation of the individual towards the universal, which is equivalent to the experience of Symbolic castration in Lacan. Furthermore there may be the difference between Hegel and Lacan as the following; while in Hegel the experience of Separation is founded on the spontaneity of the Spirit, for Lacan it is to be compelled and structured by the absolute Other.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.113-130
• /
• 2011

Due to the development of information and communication technology, the global influence on politics, economics, society, and culture has grown. A major example of this impact on the economic sector is the growth of e-commerce, which increases both the speed and efficiency of businesses. In light of these new developments, businesses need to shift away from the misconception that information overwhelms to embrace the enhanced competitiveness that e-commerce provides. However, concern about fraudulent transactions through e-commerce is pertinent because of the loss in both critical revenue and consumer confidence in open markets. Current solutions for fraudulent transactions include real-time monitoring and processing, payment pending, and confirmation through SMS, E-mail, and other wired means. Our research focuses on the management of Fraud Detection Systems (FDS) to safeguard online electronic payment systems. With effective implementation of our research we hope to foster an honorable online trading culture and protect consumers. Future comparative research in domestic and abroad markets would provide further insight into preventing fraudulent transactions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.84-94
• /
• 2013

This study scrutinizes the titles of serial poems on Japanese Apricot, which have lucid characters on season and time changes, having been appreciated and recited by the scholars in the Choseon Dynasty era and analyses the records of Zhang zi(1153~1235), a writer in Song(宋) Dynasty in China, having presented the objects harmonizing perfectly with Japanese Apricot. The results of this study categorizes the objects of Japanese Apricot appreciation and establishes the landscape characteristics on Japanese Apricot appreciation affiliated with as follows. First, the objects of Japanese Apricot appreciation are categorized into 'form of blossoms', 'natural feature(景物)', 'place of tree planting', 'the picturesque scene(景色)' and 'behavior'. Second, the scholars regarded the single trees whose branches are grotesque as the objects of appreciation and enjoyed them. They preferred white and single petal Japanese Apricot and admired red Japanese Apricot which has Taoism images. Third, they admired pines and camelias which represent fidelity and strength and valued Japanese Apricot with cranes which remind themselves of solitary scholars. Fourth, they appreciated the images of Japanese Apricot reflected on the water, and the poetically inspiring atmosphere where the trees are planted by the window. Fifth, the moon and snow were crucial weather conditions for appreciating. cold weather and time from night to dawn were ideally suited for enjoying. Sixth, they enjoyed blossoms in various fashions like bottling(甁梅), potting(盆梅), green-housing(龕梅), searching(龕梅) and black-and-white painting(墨梅) with a view to seeing blossoms earlier than the usual flowering time. Moreover, they used paper drapes, bead curtains, mirrors and ice lamps for active appreciation. They also listened to the sound of Piri(wind) and Geomungo(string), played go and drew tea with noble and elegant beauties when they enjoyed Japanese Apricot. The scholars influenced by the neo-Confucianism, which contemplates the objects, attached the specific sentiments like memories, grieves, dreams and farewells to Japanese Apricot and appreciated them. As stated above the scholars enjoyed the landscape including the picturesque scene like climate-weather, time-season and human behaviors not to mention the physical beauty of Japanese Apricot themselves and objects in company with Japanese Apricot including animals and plants.