• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.155-161
• /
• 2007

A bogie frame is typical safty part of railway vehicle. Main performance of a bogie frame is to support a car body and passenger weight and transfer traction and braking force. This paper is to evaluate the static strength and fatigue strength for the end trailer bogie with UIC 615-4 code. Therefore stress analysis of the end trailer bogie frame has been performed for various loading condition according to the UIC 615-4 code and haigh diagram is used for evaluation of fatigue strength. By the results of these analysis, static and fatigue strength of the end trailer bogie is satisfied with a applied criterion.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.175-181
• /
• 2007

본 연구에서는 지하철용 전동차의 현가장치를 구성하는 1차 현가장치 및 2차 현가장치의 강성 및 감쇠지수 변화가 전동차의 상하진동에 미치는 영향을 분석하였다. 실제 운행 중인 전동차에 대하여 액슬박스, 대차, 객차에서 측정된 진동 데이터를 바탕으로 대차와 차체로 구성된 2자유도계 해석모델을 생성하였고, 실측된 윤축의 진동을 입력신호로 하여 수치해석을 수행하였다. 1, 2차 현가장치의 강성 및 감쇠지수의 변화에 따른 응답을 고찰한 결과, 차량의 상하진동에 지배적인 영향을 주는 설계변수는 2차 공기스프링의 강성임을 알았다. 또한 이러한 결과는 ADAMS/RAIL 전산해석을 통해서도 검증할 수 있었다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1313-1318
• /
• 2007

Recently, the terror frequently has taken place for unspecified individuals as modern society is complicated. Especially, in case of a subway carriage fire as Daegu subway fire, because smoke spread path usually coincide with passenger's evacuation path, it will reduce visibility and can cause fatalities by asphyxiation. This study performs not only fire simulation with CFAST V6 but also evacuation simulation with EXODUS V4 for the purpose of taking measures for passengers's life safety in subway fire. As a result of evacuation simulation without fire, evacuation times are 36 s for EXODUS V4 and simple hand calculation, and when fire is occurred fire, 101 persons evacuated in 32 s. Therefore, a countermeasure of evacuation in subway carriage fire is required to repression of fire and emergency exit.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.116-123
• /
• 2010

The Study of the Railway-saving electric water heaters to replace electric heaters when combined, Separate bathroom with hot water in winter, as coaches, without the need to warm up with hot water may be.To improve passenger service can tell. High-efficiency energy saving energy from furnace. Due to fuel cost savings and business improvements come true. Can prevent pollution.Heating the room next to railway vehicle utilization is expected to nopeulgeot.Is expected to expand gradually.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1297-1301
• /
• 2007

The indoor air quality guideline of public transportation means was prepared recently. therefore we consider a countermeasure for the indoor air quality improvement of public transportation means. In this work, air-cleaner with roll filter system which developed alternative of indoor air quality guideline. The develpoed roll filter system is two function. the first function harmoniously circulated to heating and cooling air through HVAC system and secondary function removed PM(particluatie matters) which re-scatting to passenger's movement and suppled from outdoor air. Filter media of roll filter system select optimum electret mesh filter out of many filter media. Selected filter media was performanced tests of pressure drop, collection efficiency and dust holding capacity. Finally developed roll filter system was performanced bench test.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.163-168
• /
• 2001

A FEM-based analytical approach was used to evaluate the fatigue strength of a KHST gangway. A KHST gangway was made of AC4C, 5083-O, 6005A-T6 aluminum alloys. The fatigue strengths of them were obtained from the related code and literatures. The effect of tensile mean stress was taken into account by the modified Goodman diagram, but the effect of compressive mean stress was not considered. There was not any location of a KHST gangway that exceeded the allowable fatigue strengths.

• Journal of KSNVE
• /
• v.7 no.5
• /
• pp.827-836
• /
• 1997

To suggest the standard of railroad noise and its measures and grasp its status 15 open sites of the Jungang. Taeback and Youngdong line in which the background noise level is very low and the railroad is at grade and 7 urban sites of the Kyungboo and Honam line were selected and the sound level which 373 trains passing through the former and 271 trains passing through the latter emitted was investigated. The community response of railroad noise was surveyed for apartment near wayside. Noise reduction of wall for apartment at the wayside was investigated. The prediction of electric train subway noise is derived for the environment impact assessment.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.85-88
• /
• 2012

본 연구는 지하철 객실 화재시 배출가스나 연기에 의한 사망사고에 대해서 FDS(ver. 5.0) 사용코드를 이용해 객실내 화재의 유동현상을 검토한다. 시뮬레이션 모델로 인천메트로 송도연장선을 기준 모델로 설정하였으며 객차 화재발생시 측창문의 개방개소에 따른 배연능력을 검증하기 위하여 측창문 개방조건에 따른 배연특성을 시뮬레이션 하여 인체의 유해성 여부에 따른 위험성 평가에 대한 결과를 도출하였다. 본 연구결과는 지하철의 성능위주 설계를 적용한 기초자료로 활용됨으로써 지하공간 화재시 인명피해 최소화를 목표로 한다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2125-2129
• /
• 2008

This study was the development of air-cleaner for railroad passenger car. the characteristic of air-cleaner is to improvement of in door air quality and easy of maintenance. the air-cleaner is applicated to roll filter system. advantage of roll filter is to reduce time and cost of maintenance. The developed air-cleaner was installed to the railroad passenger car, and then has fieldtested for roll filter system's performance. the result of field-test performance was average Eff. 32% that is average of several days' measurement data.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.75-82
• /
• 1999

본 연구의 목적은 구체 경량화의 일환으로써, 복합재료(3-X Board, Al extrusion panel, etc) 사용에 대한 가능성을 판단하기 위한 기초자료를 구축하는데 있다. 해석 대상은 2층 기차의 객차부분이고, 구체에 적용하는 복합재료는 3-X Board를 이용하였다. 구체의 구조 건전성을 평가하기 위해 상용 유한요소 프로그램을 이용하여 다양한 하중 하에서의 응력해석을 수행하였다. 구체에 사용되는 복합재료(3-X board)의 응력발생 경향을 파악하는 것이 목적이므로, 상세한 모델보다는 단순화한 모델을 이용하였다. 응력집중은 센터실(center sill), 1층 바닥과 측면과의 연결부, 그리고, 구체의 앞부분 창문 모서리에서 발생하였다. 압축 및 수직하중 하에서의 응력값들은 재료의 항복강도 내에 존재하였으나, 고유진동수는 제한 값보다 낮은 값을 갖았다. 현재 상세 모델에 대한 해석을 수행 중에 있다. 본 연구는 복합재료(3-X board)가 적용된 구체에 대한 초기 연구로써 만족할 만한 결과를 제시한다.