• Title/Summary/Keyword: 감도분포

Search Result 91, Processing Time 0.027 seconds

Minimization of power penalty using chirp parameter for 2.5 Gbps, 8 channel, 400 km optical link system with dispersion and SPM (분산과 SPM이 존재하는 2.5Gbps, 8채널 400km 광 링크 시스템에서의 처핑 계수를 이용한 수신 감도 저하의 최소화)

  • 이병호;박영일;김익상;채창준;이병호
    • Korean Journal of Optics and Photonics
    • /
    • v.8 no.3
    • /
    • pp.250-253
    • /
    • 1997
  • The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

  • PDF

양전자 방출 단층기

  • 나종범;조장희;노용만
    • 전기의세계
    • /
    • v.38 no.8
    • /
    • pp.26-31
    • /
    • 1989
  • PET는 다른 nuclear imaging system(SPECT등)과는 달리 기계적 collimator가 필요없이 전자적 collimation을 할 수 있고 이런 collimation역할로 인하여 SPECT보다 감도(sensitivity)가 좋고 또한 전체 영상영역에 걸쳐 해상도와 감도가 균일하며 감쇄상수의 보정이 쉽다. 기존 X선 CT나 NMR-CT에 비해 해상도와 신호대 잡음비가 떨어짐에도 불구하고 PET 시스템 독특한 장점은 영상 자체가 단순한 영상을 재현하는 것이 아니라 인체내의 생태학적 또는 생리학적인 변화에 대한 정량적 분석이 가능하다는데 있다. 즉, $^{11}$ C, $^{13}$N, $^{15}$ O, $^{18}$ F와 같은 물질은 인체내에 생리적현상과 매우 밀접한 관계를 가지고 있어 이들 물질의 분포나 변화를 제공하는 것은 다른 의료 영상기기와 뚜렷이 구별되는 점이라 할 수 있다. 따라서 앞으로 분해 능력이 2-3mm의 PET시스템의 개발은 임상은 물론 의료연구용으로 매우 유용할 것이며 종래의 NMR과 X선 CT 와는 다른 보완적인 정보를 제공하는 영상시스템으로써 의료산업계의 발전에 크게 기여를 할 것이라고 본다.

  • PDF

Formation of the functional plasma ploymerized thin films by a new type reactor (새로운 반응장치를 이용한 기능성 플라즈마 중합막의 제작)

  • 김종택;이상희;박종관;박구범;이덕출
    • Journal of the Korean Vacuum Society
    • /
    • v.7 no.1
    • /
    • pp.72-76
    • /
    • 1998
  • A new gas-flow type reactor for plasma polymerization was developed to synthesize functional polymers, which enhances reaction of radicals activated in the discharge. Styrene was used for the plasma polymerization and molecular strucure and molecular weight distribution of the plasma -polymerized styrene were studies. The ploymer was evaluated to be an efficient electron beam resist. The sensitivity of the plasma-polymerized styrene film formed by this new reactor was better than that of the reported values of conventional polystyrene, Fine resist patterns could be successfully developed by a wet process.

  • PDF

Enhanced Detection Sensitivity of Surface Plasmon Resonance Biosensing Based on Colocalized Target Molecules and Evanescent Fields (생체분자와 필드의 동시국소화를 통한 플라스몬 센서의 감도향상 연구)

  • Lee, Won-Ju;Oh, Young-Jin;Kim, Dong-Hyun
    • Korean Journal of Optics and Photonics
    • /
    • v.22 no.4
    • /
    • pp.198-203
    • /
    • 2011
  • We have conducted a theoretical study to improve the detection limit of a surface plasmon resonance (SPR) sensor by co-localizing plasmonic fields and target molecules of interest. The fields were localized by nanograting antennas, while target molecules that participate in a molecular interaction were assumed to be co-localized by angled evaporation of a dielectric mask layer on the nanograting antennas. We have performed the evaluation using an overlap integral between distributions of plasmon fields and molecules and confirmed the correlation of the overlap with the sensitivity of an SPR sensor. Based on the calculated sensor characteristics, it was found that the sensitivity, if the fields and molecules are co-localized, can be as much as ten times that of non-colocalized structure.

Optimal Design of Structural Componets with Thickness and Shape Variatins (두께와 모양 변화를 통한 구조물의 최적설계)

  • 유영민
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.1
    • /
    • pp.119-126
    • /
    • 1985
  • 형상은 3차원이지만 2차원 문제로 이상화하여 해석할 수 있는 탄성구조물의 최적설계를 내연기관 연결봉(Connecting Rod)을 예제로 사용하여 진행하였다. 연결봉은 각 부위에서의 두께는 다르나 평면응력상태에 있다고 가정하였다. 연결봉의 질량을 최소화하기 위해 두께의 분포 및 2차원 모델 경계의 모양을 설계변수로 채택하였고 설계변수 및 응력치에 대한 제한조건을 적용하였다. 설계감도계수 계산을 위해 Variational Formulation, Material Derivative, Adjoint Variable이론을 도입하였고 최적화 방법으로는 Gradient Projection Method를 사용하였다. 최적설계 결과 현재 사용중인 연결봉 무게의 20%를 줄일 수 있음이 밝혀졌다.

Fabrication of Semiconductor Gas Sensor Array and Explosive Gas-Sensing Characteristics (반도체 가스 센서 어레이의 제작 및 폭발성가스 감응 특성)

  • Lee, Dae-Sik;Jung, Ho-Yong;Ban Sang-Woo;Lee, Min-Ho;Huh, Jeung-Soo;Lee, Duk-Dong
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.37 no.11
    • /
    • pp.9-17
    • /
    • 2000
  • A sensor array with 10 discrete sensors integrated on a substrate was developed for discriminating the kinds and quantities of explosive gases. The sensor array consisted of 10 oxide semiconductor gas sensors with $SnO_2$ as base material and had broad sensitivity to specific gas. The sensor array was designed with uniform thermal distribution and had also high sensitivity and reproductivity to low gas concentration through nano-sized sensing materials with different additives. By using the sensitivity signal of the sensor array at $400^{\circ}C$, we could reliably discriminate the kinds and quantities of explosive gases like butane, propane and methane under the lower explosion limit through the principal component analysis (PCA) method.

  • PDF

Recognization of Inflammable Gases Using Sensor Array and Principal Component Analysis (센서 어레이와 주성분 기법을 이용한 가연성 가스 인식)

  • Lee, Dae-Sik;Huh, Jeung-Soo;Lee, Duk-Dong
    • Journal of Sensor Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.108-117
    • /
    • 2001
  • A sensor array with 10 discrete sensors integrated on a substrate w3s developed for discriminating the kinds and quantities of inflammable gases, like butane, propane, methane, LPG, carbon monoxide. The sensor array consisted of 10 metal oxide semiconductor gas sensors using the nano-sized $SnO_2$ as base material and had differentiated sensitivity patterns to specific gas. The sensor array was designed with uniform thermal distribution and had also high sensitivity and good reproductivity to low gas concentration through nano-sized sensing materials with different additives. By using the sensing patterns of the sensor array at $400^{\circ}C$, we could reliably discriminate the kinds and quantities of the tested inflammable gases under the lower explosion limit through the principal component analysis(PCA).

  • PDF

Micro Sensor Away and its Application to Recognizing Explosive Gases (마이크로 센서 어레이 제작 및 폭발성 가스 인식으로의 응용)

  • 이대식;이덕동
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.1
    • /
    • pp.11-19
    • /
    • 2003
  • A micro sensor array with 4 discrete sensors integrated on a microhotplate was developed for identifying the kinds and quantities of explosive gases. The sensor array consisited of four tin oxide-based thin films with the high and broad sensitivity to the tested explosive gases and uniform thermal distribution on the plate. The microhotplate, using silicon substrate with N/O/N membrane, dangling in air by Al bonding wires, and controlling the thickness by chemical mechanical process (CMP), has been designed and fabricated. By employing the sensitivity signal of the sensor array at 40$0^{\circ}C$, we could reliably classily the kinds and quantities of the explosive gases like butan, propane, LPG, and carbon monoxide within the range of threshold limit values (TLVs), employing principal component analysis (PCA).

Constraining Dust Properties of high-z Lyα Emitters using the ALMA Archive

  • Moon, Byeongha;Yang, Yujin;Oh, Suyeon
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.42 no.2
    • /
    • pp.73.2-73.2
    • /
    • 2017
  • 고적색편이의 $Ly{\alpha}$ 방출은하($Ly{\alpha}$ emitter; LAE)는 UV 연속복사에 비해 강한 $Ly{\alpha}$ 방출선을 내는 천체로서 매우 젊고, 낮은 금속함량을 가진 원시은하이다. LAE의 강한 $Ly{\alpha}$ 방출선은 먼지가 매우 적기 때문에 소광이 거의 없이 은하에서 탈출하거나, 먼지의 국지적인 분포 때문에 나타나는 것으로 추정된다. 그러나 기존 전파관측 시설의 낮은 감도 때문에 LAE의 먼지성분은 잘 알려져 있지 않다. 우리는 Atacama Large Millimeter/Submillimeter Array (ALMA)에 의해 우연히 관측된 LAE을 찾아 먼지연속복사를 직접적으로 검출하는 시도를 해 보았다. COSMOS와 ECDFS 영역에서 발견된 약 954개의 LAE 중에서 총 38개가 ALMA로 관측된 영역에 우연히 위치한다는 것을 발견하였고, 이 중 18개의 LAE에 대해 ALMA 관측영상을 모두 더하는 방법(image stacking)을 이용하여, LAE에서 방출되는 먼지연속복사의 상한선을 결정하였다: S(0.50-0.67mm) < $63.2{\mu}Jy$, S(0.21-0.38mm) < $46.7{\mu}Jy$. 본 연구에서는 비록 직접적인 검출에는 실패하였으나, 주어진 LAE 샘플에 대한 ALMA archive 검색, 원자료 다운로드, 영상 만들기, 이미지 합침 과정을 자동화하는 Python 파이프라인을 완성하였다. 이 자동화된 과정을 이용하면, 앞으로 ALMA archive가 늘어남에 따라 감도가 높아진 실험을 쉽게 반복할 수 있을 것으로 기대된다.

  • PDF

Detection Range Improvement of Radiation Sensor for Radiation Contamination Distribution Imaging (방사선 오염분포 영상화를 위한 방사선 센서의 탐지 범위 개선에 관한 연구)

  • Song, Keun-Young;Hwang, Young-Gwan;Lee, Nam-Ho;Na, Jun-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.12
    • /
    • pp.1535-1541
    • /
    • 2019
  • To carry out safe and rapid decontamination in radiological accident areas, acquisition of various information on radiation sources is needed. In particular, to figure out the location and distribution of radiation sources is essential for rapid follow-up and removal of contaminants as well as minimizing worker damage. The radiation distribution detection device is used to obtain the position and distribution information of the radiation source. In the case of a radiation distribution detection device, a detection sensor unit is generally composed of a single sensor, and the detection range is limited due to the physical characteristics of the single sensor. We applied a calibration detector for controlling the detection sensitivity of a single sensor for radiation detection and improved the limited detection range of radiation dose rate. Also, gamma irradiation test confirmed the improvement of radiation distribution detection range.