• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.29-33
• /
• 2001

본 논문은 IMT-2000용 동기(cdma2000) 및 비동기(W-CDMA) 통신시스템간의 가드 밴드와 전파간섭에 관한 것으로, ITU-R SM.337-4 권고(안)과 수신필터 특성을 반영한 ACIR(Adjacent Channel Interference Ratio) 표준규격을 IMT-2000의 특징인 다층 셀 구조에 적용하여 두 시스템간의 가드밴드로 1.5625MHz를 제안했다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.77-81
• /
• 2000

The content of this paper is concerned with guard band and technical standard for wireless local loop facilities will be used at 260Hz domestic frequency band. In order to determine guard band between wireless local loop providers, this paper analyze radio interferences from radio station used adjacent frequency band. The paper proposes draft Out-of-Block Emission Mask of for wireless focal loop facilities in accordance with ITU-R Recommendation and ARIB Standard in Japan

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.370-371
• /
• 2010

본 논문은 지상파 DMB에서 각 서비스 사업자들을 위해 이미 할당된 주파수 블록(block)들간 가드밴드내에 신규 블록을 추가로 할당함으로써 주파수 이용 효율을 높이기 위한 방법을 제안한다. 본 논문은 특히 6 MHz TV 대역내에 이미 할당되어 서비스 중인 현재의 지상파 DMB 서비스와 역방향 호환성을 유지하면서 주파수 가드밴드 영역을 최대한 활용하기 위해, 종래의 송신 시스템에 새로운 서브캐리어를 삽입하고 단일 6MHz 주파수 대역의 전송신호를 생성하기 위한 방법을 제시하고 있다. 본 논문에서의 제안한 방법을 활용하면, 서비스 사업자 입장에서는 가변적인 주파수 대역폭 이용을 통해 좀 더 다양한 서비스 모델을 구상할 수 있고, 사용자 측면에서는 단말 상황에 따라서 기본적인 서비스부터 고품질의 모바일 멀티미디어 서비스를 제공받을 수 있을 것이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1139-1144
• /
• 2019

A calibration system for diagnosing and confirming the performance of precision measuring instruments minimizes the risk of misjudgment of calibration resulted by complying with international standard requirements in order to ensure the reliability of calibration results. This paper uses a proposed calibration system suitability assessment and a guard-band technique through an analysis of uncertainty factors when it is impossible to acquire and operate high-performance equipment at a calibration laboratory, and proposes an optimized test limit output model substituting performance standards. The proposed method provides an optimized test standard to meet the quantitative evaluation criteria of the calibration system and the probability of false acceptance risk required by international standards.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2003

This paper proposes downlink blocking model and approximation equation using lower bound approximation in order to determine the proper guard band between cdma2000 1X and WCDMA in handover areas. The frequency sharing conditions obtained by the model and approximation equation on blocking probability proposed in the paper, are co-site of base station and guard band higher than 1 MHz. Also, the proposed equation is in the form of Q-function. It is an analytical solution overcoming the drawback of recalculation, belonged to Monte-Carlo technique.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.673-681
• /
• 2013

Purpose: The purpose of this study is to investigate the design optimization modeling of screening procedures based on the assessment of misclassification errors. Methods: Misclassification errors due to measurement variability are derived for normally distributed quality characteristics. Further, an optimization model for ensuring the level of outgoing quality is proposed and demonstrated through an illustrative example. Results: It is shown that two types of misclassification errors (i.e., false acceptance and false rejection) may be properly compromised through an analytical assessment of measurement errors and an optimization modeling. It is also discussed that a variety of optimization modeling may be enabled based on the derivation of measurement errors. Conclusion: It may be concluded that the design of screening inspection may further be facilitated by including the effect of measurement errors on the performance of screening inspection procedure.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.33-39
• /
• 2014

In this paper, a new on-chip aging sensing circuit based on flip-flops is proposed to detect a circuit failure of MOSFET digital circuits casued by aging phenomenon such as HCI and BTI. The proposed circuit uses timing windows to warn against a guardband violation of sequential circuits, and generates three warning bits right before circuit failures occur. The generated bits can apply to an adaptive self-tuning method for reliable system design as control signals. The aging sensor circuit has been implemented using 0.11um CMOS technology and evaluated by $4{\times}4$ multiplier with power gating structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.609-614
• /
• 2008

Upstream data frame of TDM-PON includes various types of overheads, and there exist guard bands between consecutive frames from different ONUs. Although they are indispensible in synchronization and performance, they cause bandwidth waste at the same time. To solve this problem, a new TDM-PON that uses two types of wavelengths in upstream transmission is suggested. By even distribution of two wavelengths among ONUs and overhead overlap between frames that use different wavelengths, almost 100% bandwidth efficiency could be achieved. A serializer that multiplexes signals from two wavelengths is implemented for this purpose.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.129-133
• /
• 2019

Frequency resource efficiency is important in satellite communication systems. One of the causes of a waste of frequency resource is bad flatness. In the case, flatness of satellite Tx terminals would be worse by ACI and guard band. In order to overcome this problem, this paper proposes a technique for frequency response equalization in satellite Tx terminals. First of all, a general linear polynomial expression which meets least squares of representative measurement data is calculated to interpolate unmeasured data. And then flatness can be adjusted using the polynomial expression. Simulation results illustrate adjusted data have lower peak to peak and standard deviation than original data, and these show that flatness be improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.124-129
• /
• 1999

In this paper, we point out the problem of guard band between wireless local loop and wireless LAN, review technologies of wireless local loop, and analyze radio interference between wireless local loop and wireless LAN. The contents of this paper are helpful to make a rule for technical specifications of wireless local loop facilities.