1 |
Chandra, Jeya, and Schall, Susan. 1988. "The Use of Repeated Measurements to Reduce the Effect of Measurement Errors." IIE Transactions 20:83-7.
DOI
ScienceOn
|
2 |
Chen, Shieh-Liang, and Chung, Kun-Jen. 1996. "Selection of the Optimal Precision Level and Target Value for a Production Process: The Lower-Specification-Limit Case." IIE Transactions 28:979-85.
DOI
|
3 |
Drezner, Zvi, and Wesolowsky, George O. 1990. "On the Computation of the Bivariate Normal Integral." Journal of Statistical Computation and Simulation 35:101-7.
DOI
|
4 |
Grubbs, Frank A., and Coon, Helen J. 1954. "On Setting Test Limits Relative To Specification Limits." Industrial Quality Control 10:15-20.
|
5 |
Hooke, Robert, and Jeeves, T. A. 1966. "Direct Search of Numerical and Statistical Problems." Journal of ACM 8:212-29.
|
6 |
Jeong, Seong Hoon, Kongsuwan, Pauline, Truong, Nguyen Khoa Viet, and Shin, Sangmum. 2013. "Optimal Tolerance Design and Optimization for a Pharmaceutical Quality Characteristics." Mathematical Problems in Engineering. doi: 10.1155/2013/706962.
DOI
|
7 |
Kim, Young Jin, Cho, Byung-Rae, and Kim, Nam Ki. 2007. "Economic Design of Inspection Procedures Using Guard Band When Measurement Errors Are Present." Applied Mathematical Modelling 31:805-16.
DOI
ScienceOn
|
8 |
Lin, Chih-Young, Hong, Chien-Long, and Lai, Jiing-Yih. 1997. "Improvement of a Dimensional Measurement Process Using Taguchi Robust Designs." Quality Engineering 9:561-73.
DOI
ScienceOn
|
9 |
Mader, Douglas P., Prins, Jack, and Lampe, Rod E. 1999. "The Economic Impact of Measurement Error." Quality Engineering 11:563-74.
DOI
ScienceOn
|
10 |
Park, Young-Hyun. 1998. "A Study of Quality Costs in a Multicomponent and Low Volume Products Automated Manufacturing System." Quality Improvement Through Statistical Methods (ed. B. Abraham) 405-14.
|
11 |
Rishi, Swanand. 2012. "Guard-Banding Methods - An Overview." Proceedings of AdMET 2012 (Paper No. UM001). London: UK.
|
12 |
Tang, Kwei, and Schneider, Helmut. 1988. "Selection of the Optimal Inspection Precision Level for a Complete Inspection Plan." Journal of Quality Technology 20:153-6.
DOI
|