• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.187-192
• /
• 2003

The magnetic and thermal properties of NiFe/[IrMn-Mn]/CoFe with Mn additions have been studied. As-deposited CoFe pinned layers with [IrMn-Mn]layer had dominantly larger exchange biasing field ( $H_{ex}$) and blocking temperature ( $T_{b}$) than those with pure I $r_{22}$M $n_{78}$ used. The $H_{ex}$ and $T_{b}$ improved with 76.8-78.1 vol% Mn, but those of the NiFe/IrMn/CoFe dropped considerably with more addition of 0.6 vol % Mn. The average x-ray diffraction peak ratios of fcc [(111)CoFe, NiFe]/(111)IrM $n_3$ textures for the Mn inserted total vol of 75.5, 77.5, and 79.3% were about 1.4, 0.8, and 0.6, respectively. For the sample without Mn inserted layer, the $H_{ex}$ between IrMn and CoFe layers was almost zero, but it increased to 100 Oe after annealing of 250 $^{\circ}C$. For as-grown two multilayers samples with ultra-thin Mn layers of 77.5 and 78.7 vol %, the $H_{ex}$s were 259 and 150 Oe, respectively. In case of IrMn with 77.5 vol% Mn, the $H_{ex}$ was increased up to 475 Oe at 350 $^{\circ}C$ but decreased to 200 Oe at 450 $^{\circ}C$, respectively. The magnetic properties and thermal stabilities of NiFe/[IrMn-Mn]/CoFe multilayer were enhanced with Mn additions. In applications where higher $H_{ex}$ and $T_{b}$ are required, proper contents of Mn can be used. be used. used.

• Clinical and Experimental Reproductive Medicine
• /
• v.4 no.1
• /
• pp.17-25
• /
• 1977

Anderson(1937), Power and Barnes(1941) reported a study concerning a method of tubal sterilization in association with peritoneoscopy or laparoscopy in which they cauterized the tubes. There appears to have been a hiatus of interest in sterilization (cold or hot) associated with laparoscopy until reintroduction by Palmer(1963), Frangenheim(1964) and Steptoe(1967). On the other hand, for interval female sterilization, however, minilaparotomy is relatively new. By Saunder and Munsick(1972), John Lyle(1974), Frank Stubb(1974), Vitoon(1973) and B.C. Bai(1975), their own technique for interval female sterilization requires 2.0 to 2.5cm, incision at the margin of the mons pubis. In Korea, female sterilization by means of minilaparotomy firstly reported by B.C. Bai using Bai's uterine elevator, of his own device, early in 1975. Recently inteval female sterilization by laparoscopy and minilaparotomy are widely accepted throughout the world especially in Asian countries. Minilaparotomy is carried out from 1974, laparoscopic sterilization from 1976, and in this study each of 250 cases of those were analysed and discussed for the comparison at Seoul Red Cross Hospital. (1) In the age distribution, numerous clients were in their age of $31{\sim}35$ in laparoscopy as well as minilaparotomy. Average 33.7 years in L and 33.2 years in M. (M=minilaparotomy, L=laparoscopic sterilization) (2) As regarding living children, women having 3 children represented the greatest number, 113 cases out of 250 in M group and 102 cases out of 250 in L group. Average No. of child are 2.9 in Land 3.1 in M. (3) Concidering the operation day in the menstrml cycle, the greatest number of cases, those who underwent tubal sterilization during the days of $26{\sim}$, next during the $6{\sim}10$ days of the cycle in both group. (4) Concidering the operation time, 188 cases by laparoscopy were performed in $6{\sim}10$ minutes, 33 cases within 5 minutes and 24 cases in $11{\sim}15$ minutes. Maximum 50 minutes, minimum 4 minutes and average 8.3 minutes. The majority of cases (154 cases) by minilaparotomy required $6{\sim}10$ minutes and 67 cases $11{\sim}15$ minutes, 6 cases within 5 minutes. Maximum 30 minutes, minimum 4 minutes and average 10.4, minutes. In both groups, most of the reasons for the extra length were surgical difficulties such as thick abdominal wall, pelvic adhesion, less cooperation of patients in early period of this study. (5) Hospital stay after operation in L group required $3{\sim}4$ hours in 125 cases, $2{\sim}3$ hours in 41 cases, $4{\sim}5$ hours in 32 cases out of 250. Maximum 8 hours, minimum 1 hour and average 3.8 hours. In M group hospital stay required $6{\sim}7$ hours in 100 cases, over 7 hours in 85 cases, $5{\sim}6$ hours in 46 cases and so on. Maximum 14 hours, minimum 2 hours and average 6.5 hours. (6) The time between operation and gas passing in the majority cases of both groups, were $12{\sim}36$ hours. A veragetime 20.3 hours in L and 27.2 in M. (7) Laparoscopic sterilization coincident with induced abortion were carried out in 27 cases, laparoscopy with minilaparotomy to control for mesosalpingeal hemorrhage in 1 case. Minilaparotomy coincident with induced abortion were performed in 65 cases, D and C whit polypectomy, menstrual regulatian, and remaval of IUD in 1 case respectively. (8) In L group, 1 case of mesosalpingeal hemorrhage, 1 case of abdominal wall infection were complicated during operation. In M group, 1 case of uterine perfaration, 1 case of abdominal wall infection, 1 case of hemorrhage from omentum and 1 case of bloody vaginal discharge were complicated. No intensive medical treatment was required for those minor complications in both groups. (9) No failure has been recognized and these two sterilization techniques might be the simple, safe and the most effective method for permanent contraception at present time. There is no significant clinical defference between L and M group in this study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.223-233
• /
• 2015

In order to evaluate the pollution of heavy metals in offshore surface sediments around shipyards in Korea, surface sediment samples were collected at eleven stations around four major shipyards located in the southeastern coast of Korea in summer 2010 and nine kinds of heavy metals such as copper(Cu), zinc(Zn), cadmium(Cd), lead(Pb), chrome(Cr), arsenic(As), mercury(Hg), iron(Fe) and aluminum(Al) in sediments were analyzed. The concentrations of Cu at all sampling stations were in the range of 47.10~414.96 mg/kg and exceeded TEL(Threshold Effects Level) 20.6 mg-Cu/kg of Korean marine environmental standards for offshore sediments and ERL(Effect Range-Low) 34.0 mg-Cu/kg. The concentrations of Cu at seven stations around four shipyards were 65.18~414.96 mg/kg and exceeded PEL(Probable Effects Level) 64.4 mg-Cu/kg of Korean marine environmental standards for offshore sediments. The concentration of Cu at one station around B-shipyard was 414.96 mg/kg and exceeded ERM(Effect Range-Median) 270.0 mg-Cu/kg. The concentrations of Zn at all stations were in the range of 135.09~388.79 mg/kg which exceeded ERL 150.0 mg-Zn/kg. The concentrations of Zn at seven stations around four shipyards were 157.57~388.79 mg/kg and exceeded PEL 157.0 mg-Zn/kg. The concentration of Zn at one station around B-shipyard was 388.79 mg/kg and was approaching ERM 410.0 mg-Zn/kg. The concentrations of Cd at all stations were in the range of 0.11~0.54 mg/kg and were below TEL 0.75 mg-Cd/kg and ERL 1.2 mg-Cd/kg. The concentrations of Pb at all stations were in the range of 18.04~105.62 mg/kg. The concentrations of Pb at two stations around B-shipyard were 73.87~105.62 mg/kg which exceeded TEL 44.0 mg-Pb/kg and ERL 46.7 mg-Pb/kg, and were below PEL 119.0 mg-Pb/kg and ERM 218.0 mg-Pb/kg. The concentrations of Cr at all stations were in the range of 51.26~85.39 mg/kg. The concentration of Cr at one station around B-shipyard was 85.39 mg/kg and exceeded ERL 81.0 mg-Cr/kg. The concentrations of As at all stations were in the range of 8.70~22.15 mg/kg which exceeded ERL 8.2 mg-As/kg and were below ERM 70.0 mg-As/kg. The concentrations of As at eight stations around A-shipyard, B-shipyard and D-shipyard were 14.93~22.15 mg/kg which exceeded TEL 14.5 mg-As/kg and were below PEL 75.5 mg-As/kg. The concentrations of Hg at all stations were in the range of 0.02~0.35 mg/kg. The concentrations of Hg at three stations around A-shipyard were 0.11~0.13 mg/kg which were almost equal to TEL 0.11 mg-Hg/kg. Those at two stations around B-shipyard were 0.27~0.35 mg/kg which exceeded TEL 0.11 mg-Hg/kg and ERL 0.15 mg-Hg/kg, and were below PEL 0.62 mg-Hg/kg and ERM 0.71 mg-Hg/kg. The concentrations of Fe and Al at all stations were in the range of 2.90 3.66 % and 3.12 6.80 %, respectively. These results imply that heavy metals such as copper, zinc, lead, arsenic and mercury were likely to be transferred to marine environment from shipyards, especially from B-shipyard.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.119-152
• /
• 2009

Korea now has a rapidly expanding and developing space programme with exploration aspirations. The government is giving priority to the aerospace industry and, to put it on a better footing, enacted an Aerospace Industry Development Promotion Act in I987, a Space Development Promotion Act in 2005 and a Space Compensation for Damage Act in 2007. I would like to describe briefly the legislative history, main contents and comment for these three space acts including especially launch licensing, registration of space objects, use of satellite information, astronaut rescue, liability for compensation, third party liability insurance and establishment of committee and plans to assist the Korean space effort. Furthermore author proposed to legislate a new draft for the establishment of a Korean Aerospace Development Agency (KADA: tentative title) to create a similar body to Japan Aerospace Exploration Agency (JAXA), British National Space Centre (BNSC) of UK, French Centre National d'Etudes Spatiales (CNES), German Aerospace Center (DLR), Swedish Space Corporation (SSC), China Aerospace Science and Industry Corporation (CASIC), Indian Space Research Organization (ISRO) as well as the Korean Space Agency (KSA: Tentative title) to create a similar body to Canadian Space Agency, European Space Agency, Russian Space Agency, Italian Space Agency, Israel Space Agency, Indian Department of Space, National Aeronautics and Space Administration (NASA) of USA, China National Space Administration in order to develope efficiently space industry. If the Korean government will be establish the Korean Space Agency as an governmental organization in future, it is necessary to revise the contents of the Government Organization Act. It is desirable and necessary for us to establish an Asian Space Agency (ASA), in order to develop our space industry and to promote research cooperation among Asian countries, based on oriental idea and creative powers.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.142-163
• /
• 2019

The purpose of this study is to analyze the effect of problem solving ability and satisfaction of university students who are pre-technology teachers in woodworking products(birdhouse) making program using design thinking. Survey responses are analyzed by statistical programs(SPSS ver.20) such as satisfaction, confidence in problem solving, difficulties and causes of difficulties according to gender and grade of 33 students who conducted experience programs in extra-curricular programs to improve creativity and problem solving ability. The main conclusions of this study are as follows: First, the average of total satisfaction about experience programs is 4.39, which is somewhat high. The highest average response is 'feelings of accomplishment' and 'advice in the surroundings'(M = 4.46). There is no significant difference between male and female, and grade. The students interest in group-based different birdhouse woodworking together with the help of the surrounding people by the process of design thinking rather than practice to follow. Therefore, I'd like to recommend to other students due to this program shows a high self-confidence, sense of accomplishment, and satisfaction. Second, the total average response of students 'self-confidence for problem solving at the group based making experience program using design thinking is 3.80. In result of group activities, the students have self-confidence of 'problem-solving ability and deal with difficult situations'. Later, in making programs, complementing difficulties of making can enhance the satisfaction of the students. Third, in the survey questionnaire related with problem solving ability confidence, between 'I have the ability to solve many problems' and 'I always have the ability to cope with new and difficult business situations' show the highest correlation. Therefore, in order to improve self-confidence of problem solving ability, it is necessary to prepare teaching learning programs that can strengthen problem solving ability. Fourth, in the new design and making process not a given product design, the most difficult step is 'the process of rework and modifying idea product'. The main reason that students have difficulty in the production process is 'lack of knowledge and ability to produce'. To make various woodworking products using design thinking process, it can be helpful to make works if you have enough training on woodworking and design thinking before product making. The students' satisfaction about team-based learning using design thinking that helps improving creativity and problem solving ability is high. Therefore, the result of the research in other making activity program that design thinking is applied and analyzed can improve students' problem solving ability.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.4
• /
• pp.24-41
• /
• 2013

This study aims to investigate the complex planning processes and design ideas of the Gwanghwamun Plaza which was opened in 2009. The opening of the plaza was significant as it was built in order to restore the symbolic meaning of axis in the historical Joseon Dynasty that was distorted during the Japanese Imperialism. The plaza itself attracts many citizens and tourists by providing the empty ground carrying historical ambiences around. In this paper, the story of the Gwanghwamun plaza will be summarized. Particularly, the background of promoting the project will be discussed and the whole planning process will be dealt with. The plaza was realized through several stages. First, the planning stage will be reviewed. The planning stage had been a quite long process since the initial idea was discussed. Since the early 90s, the political decision of making the plaza was made through the change of people's understanding toward public space. At this stage, the city government worked together with diverse citizens and professionals to share the vision and to realize the right decision in making the plaza. Second, the design stage will be elaborated in detail. This is the second design stage. The former was the idea competition and the latter was the turn-key base. The final design scheme emphasized the restoration of symbolic axis and the forgotten Yukjo Street. The scheme consists of four zones such as history restoration zone, prospect and history representation zone, culture zone, and the urban zone. Through the whole design process, the original idea remained as it was. The design concept was "a place of memory and prospect." It emphasizes the history representation, view corridor, cultural activities platform as well as the emptiness and flexibility of the basic premise of the plaza. Finally, the construction stage will be discussed. There were some additions and omissions in the construction process. The design chances in the construction stage will be reviewed in detail. After the opening of the plaza, there were some changes in the detail design. We will discuss how and why these modifications were made. In the end, the social and cultural implication of the plaza will be discussed. The storytelling of the Gwanghwamun Plaza will contribute to the clear understanding of planning and design process of pubic places. Based on this reflection, we are able to think about some suggestions of public projects for the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.61-71
• /
• 1971

This study was conducted in order to investigate the effects of slaked lime and borax on the Akiochi paddy field. The pot trial(slaked lime was treated 0, 6, 10, 15g and borax 0, 0.75, 1.5g per pot) and the field trial(slaked lime was treated 0, 100, 200kg and borax 0, 10, 30, 50kg per 10are) respectively. The results are summarized as fo11ows. I. Pot Trial: 1. In a heavy treated of borax, appeared chlorosis on whole leaves(bottom) in early growing stage, However, in about 25 days after transplanting, these chlorosis were disappeared gradually. And in proportion to close by maturity after the ear-heading, changed to dark brown color and rolled at the end of upper leaves, finally withered. At the same time the part of the end of grains was also colored to dark brown. 2. Slaked lime effected to increase the ti1lering, hence increased the number of ear, on the other hand, borax showed the tendency of repression the tillering, conversely. 3. Borax effected to hurried up to heading date of rice plant, to which borax had been the plot of B$_1$ to 3 days and B$_2$ to 5 days, hurried up than control respectively, regardless of the quantities of slaked lime application. 4. According to the application of borax, the length of culm were shortened, otherwise the length of panicle were longished, then no recognized the. independent effect of slaked lime. 5. The number of grains per panicle were seemed like increased by treatment of slaked lime, but the grain were decreased in the heavy treatment of slaked lime and borax. These phenomena were showed in ratio of maturity likely tendency as above. 6. In the 1, 000 grains weight of brown rice, in the case of slaked lime was almost no significant, otherwise by increase the application of borax, increased the weight of 1, 000 grains and the size of the grains was greater. 7. The weight of rough rice and straw were showed the same tendency as the number of grains and maturity ratio. particularly, showed the phenomenon of the reduction by the heavy application of borax. II. Field trial: 1. In a heavy treated of borax, appeared chlorosis in a early growing stage, according to close by maturiting date after the ear-heading changed to dark brown the end of upper leaves, finally dried. 2. Slaked lime application accelerated the growth and increased the number of ear, but borax showed the tendency of repression the tillering. 3. Borax effected to hurried up to heading date of rice plant, according to heavy treatment of borax quickened heading date for 4 to 5 days. 4. As a whole, culm length was repressed by borax treatment. 5. Borax application 10kg per 10are advanced progress the maturity, but in the case of above 30kg per 10are of borax showed the tendency obstruction the maturity. 6. The yield of rough rice and brown rice recognized the independent effect of slaked lime and borax, respectively. the yield was decreased by the abundant of borax.

• Journal of Intelligence and Information Systems
• /
• v.21 no.3
• /
• pp.53-77
• /
• 2015

Korea has witnessed an increasing number of domestic patent applications, but a majority of them are not utilized to their maximum potential but end up becoming obsolete. According to the 2012 National Congress' Inspection of Administration, about 73% of patents possessed by universities and public-funded research institutions failed to lead to creating social values, but remain latent. One of the main problem of this issue is that patent creators such as individual researcher, university, or research institution lack abilities to commercialize their patents into viable businesses with those enterprises that are in need of them. Also, for enterprises side, it is hard to find the appropriate patents by searching keywords on all such occasions. This system proposes a patent recommendation system that can identify and recommend intellectual rights appropriate to users' interested fields among a rapidly accumulating number of patent assets in a more easy and efficient manner. The proposed system extracts core contents and technology sectors from the existing pool of patents, and combines it with secondary social knowledge, which derives from tags information created by users, in order to find the best patents recommended for users. That is to say, in an early stage where there is no accumulated tag information, the recommendation is done by utilizing content characteristics, which are identified through an analysis of key words contained in such parameters as 'Title of Invention' and 'Claim' among the various patent attributes. In order to do this, the suggested system extracts only nouns from patents and assigns a weight to each noun according to the importance of it in all patents by performing TF-IDF analysis. After that, it finds patents which have similar weights with preferred patents by a user. In this paper, this similarity is called a "Domain Similarity". Next, the suggested system extract technology sector's characteristics from patent document by analyzing the international technology classification code (International Patent Classification, IPC). Every patents have more than one IPC, and each user can attach more than one tag to the patents they like. Thus, each user has a set of IPC codes included in tagged patents. The suggested system manages this IPC set to analyze technology preference of each user and find the well-fitted patents for them. In order to do this, the suggeted system calcuates a 'Technology_Similarity' between a set of IPC codes and IPC codes contained in all other patents. After that, when the tag information of multiple users are accumulated, the system expands the recommendations in consideration of other users' social tag information relating to the patent that is tagged by a concerned user. The similarity between tag information of perferred 'patents by user and other patents are called a 'Social Simialrity' in this paper. Lastly, a 'Total Similarity' are calculated by adding these three differenent similarites and patents having the highest 'Total Similarity' are recommended to each user. The suggested system are applied to a total of 1,638 korean patents obtained from the Korea Industrial Property Rights Information Service (KIPRIS) run by the Korea Intellectual Property Office. However, since this original dataset does not include tag information, we create virtual tag information and utilized this to construct the semi-virtual dataset. The proposed recommendation algorithm was implemented with JAVA, a computer programming language, and a prototype graphic user interface was also designed for this study. As the proposed system did not have dependent variables and uses virtual data, it is impossible to verify the recommendation system with a statistical method. Therefore, the study uses a scenario test method to verify the operational feasibility and recommendation effectiveness of the system. The results of this study are expected to improve the possibility of matching promising patents with the best suitable businesses. It is assumed that users' experiential knowledge can be accumulated, managed, and utilized in the As-Is patent system, which currently only manages standardized patent information.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.1
• /
• pp.68-73
• /
• 1996

Stem length, main root length and main root diameter showed rapid increasement in two-years-old and three-years-old peony. And there after, the increasement was almost finished. Occurrence of disease was increasing every cultivated year, especially the development of leaf spot was most serious. In propagation by root dividing method, the radix yield (kg/10a) was increasing every cultivated year. However, the difference of radix yield at four and five-years-old peony were not significant. The radix yield of four-years-old peony was higher 26% than three-years-old one. As cultivated year goes by, content of paeoniflorin was increasing then the content was highest at four-years-old peony (4.06%). In 1995, the content, had no certain tendency, was highest at three-years-old peony (3.14%). At hot air drying, browing of peony radix was increasing every cultivated year. If we consider radix yield and color, three-years-old peony was proper object of harvesting.