• Title/Summary/Keyword: (non)arbitrary

Search Result 338, Processing Time 0.02 seconds

Differential cubature method for buckling analysis of arbitrary quadrilateral thick plates

  • Wu, Lanhe;Feng, Wenjie
    • Structural Engineering and Mechanics
    • /
    • v.16 no.3
    • /
    • pp.259-274
    • /
    • 2003
  • In this paper, a novel numerical solution technique, the differential cubature method is employed to study the buckling problems of thick plates with arbitrary quadrilateral planforms and non-uniform boundary constraints based on the first order shear deformation theory. By using this method, the governing differential equations at each discrete point are transformed into sets of linear homogeneous algebraic equations. Boundary conditions are implemented through discrete grid points by constraining displacements, bending moments and rotations of the plate. Detailed formulation and implementation of this method are presented. The buckling parameters are calculated through solving a standard eigenvalue problem by subspace iterative method. Convergence and comparison studies are carried out to verify the reliability and accuracy of the numerical solutions. The applicability, efficiency, and simplicity of the present method are demonstrated through solving several sample plate buckling problems with various mixed boundary constraints. It is shown that the differential cubature method yields comparable numerical solutions with 2.77-times less degrees of freedom than the differential quadrature element method and 2-times less degrees of freedom than the energy method. Due to the lack of published solutions for buckling of thick rectangular plates with mixed edge conditions, the present solutions may serve as benchmark values for further studies in the future.

BER of Rectangular QAM signals with MRC over Correlated Nakagami Fading Channels

  • Baek Kyung Hoon;Hyun Kwang Min;Yoon Dong Weon;Park Sang Kyu
    • Proceedings of the IEEK Conference
    • /
    • 2004.08c
    • /
    • pp.653-657
    • /
    • 2004
  • The average bit error rate (HER) performance of a Gray coded arbitrary rectangular quadrature amplitude modulation (AR-QAM) signal with maximal ratio combining (MRC) diversity in an arbitrarily correlated Nakagami-m fading channel is derived and analyzed. The derived two types of general solutions are a simple closed-form and an integral form, depending on the types of the values (integer and non-integer) of the fading parameter. Using the derived equations in this paper, we analyzed the HER performances numerically based on the practical base station antenna configuration. The results show that MRC reception is a very effective scheme so far even though the combined signals are not independent each other because of the correlation values. The antenna height and separation of the MRC system relate to the correlation coefficient value between antennas, and go a long way with the diversity advantage. In particular, it is needed to be determined the antenna height that is carefully do for the diversity advantage because the correlation coefficient and the antenna height gain are contrary to each other from the aspect of the system performance. The expressions presented here can offer a convenient way to evaluate the exact HER performance of an arbitrary rectangular QAM signal with MRC diversity reception for various cases of practical interest on a correlated Nakagami fading channel.

  • PDF

A REVIEW ON THE MATHEMATICAL ASPECTS OF FLUID FLOW PROBLEMS IN AN INFINITE CHANNEL WITH ARBITRARY BOTTOM TOPOGRAPHY

  • Chakrabarti, A.;Martha, S.C.
    • Journal of applied mathematics & informatics
    • /
    • v.29 no.5_6
    • /
    • pp.1583-1602
    • /
    • 2011
  • A special system of partial differential equations (PDEs) occur in a natural way while studying a class of irrotational inviscid fluid flow problems involving infinite channels. Certain aspects of solutions of such PDEs are analyzed in the context of flow problems involving multiple layers of fluids of different constant densities in a channel associated with arbitrary bottom topography. The whole analysis is divided into two parts-part A and part B. In part A the linearized theory is employed along with the standard Fourier analysis to understand such flow problems and physical quantities of interest are derived analytically. In part B, the same set of problems handled in part A are examined in the light of a weakly non-linear theory involving perturbation in terms of a small parameter and it is shown that the original problems can be cast into KdV type of nonlinear PDEs involving the bottom topography occurring in one of the coefficients of these equations. Special cases of bottom topography are worked out in detail and expressions for quantities of physical importance are derived.

A Heuristic Algorithm for Optimal Facility Placement in Mobile Edge Networks

  • Jiao, Jiping;Chen, Lingyu;Hong, Xuemin;Shi, Jianghong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.7
    • /
    • pp.3329-3350
    • /
    • 2017
  • Installing caching and computing facilities in mobile edge networks is a promising solution to cope with the challenging capacity and delay requirements imposed on future mobile communication systems. The problem of optimal facility placement in mobile edge networks has not been fully studied in the literature. This is a non-trivial problem because the mobile edge network has a unidirectional topology, making existing solutions inapplicable. This paper considers the problem of optimal placement of a fixed number of facilities in a mobile edge network with an arbitrary tree topology and an arbitrary demand distribution. A low-complexity sequential algorithm is proposed and proved to be convergent and optimal in some cases. The complexity of the algorithm is shown to be $O(H^2{\gamma})$, where H is the height of the tree and ${\gamma}$ is the number of facilities. Simulation results confirm that the proposed algorithm is effective in producing near-optimal solutions.

Higher-order assumed stress quadrilateral element for the Mindlin plate bending problem

  • Li, Tan;Qi, Zhaohui;Ma, Xu;Chen, Wanji
    • Structural Engineering and Mechanics
    • /
    • v.54 no.3
    • /
    • pp.393-417
    • /
    • 2015
  • In this paper an 8-node quadrilateral assumed stress hybrid Mindlin plate element with $39{\beta}$ is presented. The formulation is based on complementary energy principle. The proposed element is free of shear locking and is capable of passing all the patch tests, especially the non-zero constant shear enhanced patch test. To accomplish this purpose, special attention is devoted to selecting boundary displacement interpolation and stress approximation in domain. The arbitrary order Timoshenko beam function is successfully used to derive the boundary displacement interpolation. According to the equilibrium equations, an appropriate stress approximation is rationally derived. Particularly, in order to improve element's accuracy, the assumed stress field is derived by employing $39{\beta}$ rather than conventional $21{\beta}$. The resulting element can be adopted to analyze both moderately thick and thin plates, and the convergence for the very thin case can be ensured theoretically. Excellent element performance is demonstrated by a wide of experimental evaluations.

On the Design of Novel Hybrid Wave Generator (신형식 다기능 조파기 설계)

  • Kim, Hyochul;Oh, Jungkeun
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.58 no.2
    • /
    • pp.112-120
    • /
    • 2021
  • The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

Generative Adversarial Networks for single image with high quality image

  • Zhao, Liquan;Zhang, Yupeng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.15 no.12
    • /
    • pp.4326-4344
    • /
    • 2021
  • The SinGAN is one of generative adversarial networks that can be trained on a single nature image. It has poor ability to learn more global features from nature image, and losses much local detail information when it generates arbitrary size image sample. To solve the problem, a non-linear function is firstly proposed to control downsampling ratio that is ratio between the size of current image and the size of next downsampled image, to increase the ratio with increase of the number of downsampling. This makes the low-resolution images obtained by downsampling have higher proportion in all downsampled images. The low-resolution images usually contain much global information. Therefore, it can help the model to learn more global feature information from downsampled images. Secondly, the attention mechanism is introduced to the generative network to increase the weight of effective image information. This can make the network learn more local details. Besides, in order to make the output image more natural, the TVLoss function is introduced to the loss function of SinGAN, to reduce the difference between adjacent pixels and smear phenomenon for the output image. A large number of experimental results show that our proposed model has better performance than other methods in generating random samples with fixed size and arbitrary size, image harmonization and editing.

INFINITE FAMILIES OF CONGRUENCES MODULO 2 FOR 2-CORE AND 13-CORE PARTITIONS

  • Ankita Jindal;Nabin Kumar Meher
    • Journal of the Korean Mathematical Society
    • /
    • v.60 no.5
    • /
    • pp.1073-1085
    • /
    • 2023
  • A partition of n is called a t-core partition if none of its hook number is divisible by t. In 2019, Hirschhorn and Sellers [5] obtained a parity result for 3-core partition function a3(n). Motivated by this result, both the authors [8] recently proved that for a non-negative integer α, a3αm(n) is almost always divisible by an arbitrary power of 2 and 3 and at(n) is almost always divisible by an arbitrary power of pji, where j is a fixed positive integer and t = pa11pa22···pamm with primes pi ≥ 5. In this article, by using Hecke eigenform theory, we obtain infinite families of congruences and multiplicative identities for a2(n) and a13(n) modulo 2 which generalizes some results of Das [2].

Performance Analysis of Multiplexed VBR MPEG Video Traffic With Arbitrary Starting Times in ATM Networks (ATM망에서의 임의의 시작 시간 배열을 갖는 다중화된 가변 비트율 MPEG 비디오 트래픽의 성능 해석)

  • 노병희;김재균
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.6
    • /
    • pp.1514-1525
    • /
    • 1998
  • Two main characteristics of VBR MPEG video traffic are different statistics according to different picture types and the periodic traffic pattern due to GOP structure. Especially, the I-pictures at the beginning of each GOP generate $$\mu$h more traffic than other pictures. When several VBR Mpeg video sources are superposed, the I-picture starting times of these sources may significantly affect the cell loss characteristics of ATM $$\mu$tiplexers. In this paper, we propse a performance model for ATM $$\mu$tiplexers with VBR MPEG video sources whose starting times are arbitrary given. For analysis, both single and superposed source traffic are modeled as NDPPs (non-deterministic periodic processes), and the ATM $$\mu$tiplexer is modeled as a U-state NDPPD/D/1/B queueing system. It is hown that the numerical results are very close to the si$$\mu$ation results. From the relationships between the starting tiem distributions and the corresponding $$\mu$tiplexer performances, some considerations for designing a scheduling policy in order to obtain the maxi$$\mu$ $$\mu$tiplexing gain are presented.

  • PDF

Capacity Bounds in Random Wireless Networks

  • Babaei, Alireza;Agrawal, Prathima;Jabbari, Bijan
    • Journal of Communications and Networks
    • /
    • v.14 no.1
    • /
    • pp.1-9
    • /
    • 2012
  • We consider a receiving node, located at the origin, and a Poisson point process (PPP) that models the locations of the desired transmitter as well as the interferers. Interference is known to be non-Gaussian in this scenario. The capacity bounds for additive non-Gaussian channels depend not only on the power of interference (i.e., up to second order statistics) but also on its entropy power which is influenced by higher order statistics as well. Therefore, a complete statistical characterization of interference is required to obtain the capacity bounds. While the statistics of sum of signal and interference is known in closed form, the statistics of interference highly depends on the location of the desired transmitter. In this paper, we show that there is a tradeoff between entropy power of interference on the one hand and signal and interference power on the other hand which have conflicting effects on the channel capacity. We obtain closed form results for the cumulants of the interference, when the desired transmitter node is an arbitrary neighbor of the receiver. We show that to find the cumulants, joint statistics of distances in the PPP will be required which we obtain in closed form. Using the cumulants, we approximate the interference entropy power and obtain bounds on the capacity of the channel between an arbitrary transmitter and the receiver. Our results provide insight and shed light on the capacity of links in a Poisson network. In particular, we show that, in a Poisson network, the closest hop is not necessarily the highest capacity link.