• Journal of the Korean Professional Engineers Association
• /
• v.25 no.4
• /
• pp.102-108
• /
• 1992

This study was carried to find out the soil characteristics of landslide site and to develope landslide prediction method by seismic refraction prospecting. For these aims, landslide condition and travel time were investigated at 68 Landslide sites over the country during 1990 to 1991. The results were as follows. 1. The surface of rupture was included mainly in C layer. Its Hardness was less than 3kg / $\textrm{cm}^2$ at the upper pare of landslide. 2. When the profile line length was 20m, the range of travel time was 40 to 90 msec. The travel time did not differ between bedrocks. 3. Refraction distance ranged from 1 to 7m and mean of that was 2.5m. Travel time was increased according to receiving distance without large variance in the refraction distance but that was appeared large variance out of the refraction distance on slope that has shallow soil depth and discontinuous ground surface. Therefore, the spread distance must be shorten to 10-l5m. 4. The seismic velocity at the first layer(layer of rupture) was less than 500m1sec by degree of weathering and the velocity at the second layer decreased in order of Granite> Granitic gneiss >Sedimentary rock. 5. The first layer observed by seismic refraction was contained C layer that has parent material and weathered rocks of hardness 10-20kg/$\textrm{cm}^2$. 6. Among the range of seismic velocity was less than 200m/sec in 63% of the total plots, 200-300m/sec in 34% and 300-500m /sec in 3%. 7. There was a proportional relationship between seismic prospecting soil depth and executive soil depth, and seismic propection soil depth was about 10 to 20cm deeper than the order.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.134-141
• /
• 1997

We design the single mode dispersion-compensating fibers (DCF) which may be necessary for upgrading the previously installed 1.31 ${\mu}{\textrm}{m}$ optical communication system to the 1.55 ${\mu}{\textrm}{m}$ system. To obtain the optimum index profile that allows large negative dispersion at 1.55 ${\mu}{\textrm}{m}$, parabolic-index, double-clad fibers are analyzed by applying the 1-D FEM to the scalar wave equation of optical fibers. In constideration of macro-bending loss, the fibers are designed so that the cutoff wavelength of the $LP_{01}$ mode is greateer than 1.80 ${\mu}{\textrm}{m}$. The computer simulations show that the lower bound of the dispersion at 1.55 ${\mu}{\textrm}{m}$ is limited to about -120 ps/nm . km for the fiber index profiles satisfying the $LP_{01}$'s cutoff condition.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.131-135
• /
• 2005

Under sulfur deprived conditions, PS II and photosynthetic $O_2$ evolution by Chlamydomonas reinhardtii UTEX 90 are inactivated, resulting in shift from aerobic to anaerobic condition. This is followed by hydrogen production catalyzed by hydrogenase. We hypothesized that the photosynthetic capacity and the accumulation of endogenous substrates such as starch for hydrogen production might be different according to cell age. Accordingly, we investigated (a) the relationships between hydrogen production, induction time of sulfur deprivation, increase of chlorophyll after sulfur deprivation, and residual PS II activity, and (b) the effect of initial cell density upon sulfur deprivation. The maximum production volume of hydrogen was 151 ml $H_2$/l with 0.91 g/l of cell density in the late-exponential phase. We suggest that the effects of induction time and initial cell density at sulfur deprivation on hydrogen production, up to an optimal concentration, are due to an increase of chlorophyll under sulfur deprivation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.63-71
• /
• 2018

Strands with ultimate strength of 2,400 MPa was developed and applied in the KCI Code and the KS standard. A high-strength prestressed strand to be applied to a structure, a suitable anchorage system should be used together. Recently, a post tension anchorage for 2,400 MPa strands was developed. but there is not much research on performance evaluation. Therefore, in this study, structural analysis of local zone with 9 strands, 15 strands, and 19 strands anchorage were investigated respectively, which are most widely used for post tensioning anchorages with 2,400 MPa strands, according to PTI anchorage zone design method, and Load transfer performance from ETAG013 and/or KCI-PS101 was evaluated. Furthermore, the adequacy of the test was also analyzed by nonlinear numerical analysis. As results, the anchorages with 2,400 MPa strands satisfied the structural performance of the local area and satisfied the load transfer performance condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.8
• /
• pp.337-342
• /
• 2016

A marine SCR System is emerging as an alternative to comply with NOx Tier III Emission standards, a restriction on greenhouse gas from vessels implemented by the International Maritime Organization. The system is greatly affected by the uniformity of the fluid flowing into the catalyst, so the performance of the catalyst of an SCR system needs to be guaranteed. This study conducted research on a mixed evaporator of an SCR system, which is one of the factors affecting the uniformity of the fluid. When the angle of the mixed evaporator is set to $90^{\circ}$, the fluid uniformity is at its highest at 83%, under the condition that the length of the mixed evaporator be 3.5 D. When the length was 3.5 D and less, the fluid uniformity had a tendency to improve relative to the case without a bent pipe. However, a longer mixed evaporator results in a more perfect liquidity development in the pipe with a liquidity distribution similar to the case where no curved pipe is formed in front of the catalyst. A lower angle for the mixed evaporator results in a lower flow uniformity, and a longer length of the mixed evaporator results in a lower difference in the flow uniformity caused by the angle. The flow uniformity can be improved by 6% with a mixed evaporator, which confirmed that all factors applied to an SCR system have a close relationship with the efficiency.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.22-27
• /
• 1990

The cavity-length detuning characteristics of the hybridly mode-locked dye laser have been studied with a collinear autocorrelator. In the optimum condition, the pulse width is 0.65 ps about three times as short as that of the synchronously mode-locked dye laser. As the cavity length is increased, the pulse width becomes broader than that at the optimum cavity length because of the effect of spontaneous emission. Also, the spectrum width becomes broad, therefore the time bandwidth product ($\Deltat\Deltav$) is increased. The peak power of autocorrelation is maximum at $\Deltat=5.0\umm$ longer than the optimum cavity length. On the other hand, as the cavity length is decreased, the pulse width becomes broader and the satellite pulses appear because of the gain recovery. Also the spectrum width becomes narrower than that at the optimum cavity length. In particular, at the mismatched cavity length the center of the lasing spectrum moves to shorter wavelengths. ngths.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.61-65
• /
• 2019

Anisotropic particles have been issued in various fields due to their unique physical properties. Herein, a novel dynamic phase separation method (DPS) is introduced to fabricate anisotropic acorn-like nanoparticles. DPS consists of two dynamic conditions; solvent evaporation and nonsolvent induced precipitation. The bottom layer is controlled by feeding the water as a non-solvent diluent, and the phase separation of the upper layer relies on the diffusion and evaporation of a volatile good solvent. At this condition, the acorn-like particles were fabricated. Under a closed box filled with water (spontaneous phase separation), monodisperse polystyrene (PS) particles were synthesized. At the coexistence between DPS and spontaneous phase separation, the sizes of cap and particle were changed. Also, the volume of PS solutions influences on the particle shape. Since the unique structures could be utilized into various applications, if advanced techniques such as membrane-based controlled water feeding is developed, monodisperse acorn-like particles could be tuned.

• ETRI Journal
• /
• v.7 no.4
• /
• pp.11-14
• /
• 1985

A polysilicon self-aligned bipolar n-p-n transistor structure is described, which can be used in high speed and high packing density LSI circuits The emitter of this transistor is separated less than $0.4\mum$ with base contact by polysilicon self-align technology. Through all the process, the active region of this device is not damaged. therefore a high performance device is obtained. Using the transistor with $3.0\mum$ design rules, a CML ring oscillator has per-gate minimum propagation delay time of 400 ps at 2.7 mW power consumption condition.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2009

The inorganic-organic composite particles with core-shell structure were polymerized by using styrene and potassium persulfate (KPS) as a shell monomer and an initiator, respectively. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene composite particles polymerized in the presence of sodium dodecyl sulfate(SDS), polyoxyethylene alkylether sulfate (EU-S133D), and at none surfactant condition. We found that $SiO_2$ core / polystyrene(PS) shell structure was formed when polymerization of styrene was conducted on the surface of $SiO_2$ particles, and the concentration SDS and EU-Sl33D was $8.34{\times}10^{-2}mole/L$. The core-shell structure was confirmed by measuring the thermal decomposition of the polymer composite using thermogravimetric analyzer (TGA), and the morphology of the composite particles was characterized by transmission electron microscope (TEM).

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.4 s.18
• /
• pp.139-144
• /
• 2005

A ground anchor system is used as a load carrying element in soil work. The conventional systems with ground anthers bring about the anchorage loss of wedges when anchors are installed for the support of soil structures. Hence we developed the new type of anchor system using both the spacing apparatus and spring (length 60mm, diameter 6mm). In this system, we tan directly check the condition of wedges and PS strands and modify the problems with the slip and anchorage of wedges under construction. For demonstrating the superiority of this system, we carried out a series of the laboratory test. Consequently, we can obtain satisfactory result (18.99$\%$ reduction to the loss of conventional systems). Moreover, the replacement of wedges is easy and simple when retensioning of strands.