• 전기학회논문지
• /
• 제61권4호
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.229-233
• /
• 2003

Boron-Carbon-Nitrogen (B-C-N) system is an attractive ternary material since it has not only an extremely high hardness but also a number of other prominent characteristics such as chemical inertness, elevated melting point, and low thermal expansion. In this paper, the corrosion behavior of B-C-N thin films in aqueous solution was investigated B-C-N films with different composition were deposited on a platinum plate by magnetron sputtering in the thickness range of 150-280 nm. In order to understand effect of pH of solutions, $BC_{2.\;4}N$ samples were immerged in 1M HCl, 1M NaCl, and 1M NaOH solution at 298k, respectively. BCN samples with different carbon contents were exposed to 1M NaOH solutions to investigate effect of chemical composition on corrosion resistance. Corrosion rates of samples were measured by ellipsometry, From results, optical constant of $BC_{2,\;4}N$ films was found to be $N_2=2.110-0.295i$. The corrosion rates of $Bi_{1.\;0}C_{2.\;4}N_{1.\;0}$ films were NaOH>NaCl>HCl in orders. With increasing carbon content in B-C-N films, the corrosion resistance of B-C-N films was enhanced. The lowest corrosion rate was obtained for $B_{1.\;0}C_{4.\;4}N_{1.\;9}$ film.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.618-621
• /
• 2007

Chromium nitride (CrN) films were deposited on silicon substrate by RF magnetron sputtering assisted by inductive coupled nitrogen plasma without intentional substrate heating. Films were deposited with different levels of bombarding energy by nitrogen ions $(N^+)$ to investigate the influence of substrate bias voltage $(V_b)$ on the growth of CrN thin films. XRD spectra showed that the crystallographic structure of CrN films was strongly affected by substrate bias voltage. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) results showed that surface roughness and grain size of the CrN films varied significantly with bias voltage. For - 80 $V_b$ depositions, the CrN films showed bigger grain sizes than those of other bias voltage conditions. The lowest surface roughness of 0.15 nm was obtained from the CrN films deposited at .130 $V_b$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.72-73
• /
• 2005

Stress behavior was studied to investigate the internal behaviors of boron, carbon, and nitrogen in the 1000${\AA}$-thick tungsten boron carbon nitride (W-B-C-N) thin films. The impurities in the W-B-C-N thin films provide stuffing effects that were very effective for preventing the interdiffusion between interconnection metal and silicon substrate during the subsequent high temperature annealing process. The resistivity of W-B-C-N thin film decreases as an annealing temperature increase. The W-B-C-N thin films have compressive stress, and the stress value decreased up to $4.11\times10^{10}dyne/cm^2$ as an $N_2$ flow rate increases up to 3 sccm.

• 한국자기학회지
• /
• 제18권1호
• /
• pp.32-35
• /
• 2008

차세대 반도체 산업의 발전을 위하여 반도체 소자의 구조는 DRAM, FRAM, MRAM 등 여러 분야에서 다양한 연구가 진행되고 있다. 특히 이런 차세대 반도체 소자에서 금속 배선으로는 Cu가 사용되며, Cu 금속 배선을 위한 확산방지막에 대한 연구는 반드시 필요하다[1-3]. Cu 금속 배선을 위한 확산방지막에 대한 현재까지의 연구에서는 Tungsten(W)을 기반으로 Nitride(N)를 불순물로 첨가한 확산방지막에 대하여 연구되었다[4-7]. 이러한 W-N를 기반으로 본 연구에서는 물리적 기상 증착법(PVD) 방법인 RF Magnetron Sputter 방법으로 W-N 이외에 Carbon(C) 과 Boron(B)을 첨가하여 확산방지막의 특성을 확인하였고, 특히 Boron Target의 power를 변화하여 W-B-C-N 확산방지막의 Boron에 의한 특성과 열적 안정성을 연구하였다[8-10]. 실험은 다양한 Boron의 조성을 가지는 확산방지막을 증착하여 $\beta$-ray와 4-point probe를 사용하여 확산방지막의 특성을 확인하였고, 고온($700^{\circ}C{\sim}1000^{\circ}C$) 열처리한 후 X-ray Diffraction 분석을 하여 열적 안정성을 확인하였다.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.40-48
• /
• 1995

$TiB_2$-TiN double-layer coating have been prepared by ion beam enhanced deposition. AES, XRD, TEM and HRTEM were employed to characterize the $TiB_2$ layer. The microhardness of the coatings was evaluated by an ultra low-load microhardness indenter system, and the tribological behavior was examined by a ball-on-disc tribology wear tester. It was found that in a single titanium diboride layer, the composition is uniform along the depth of the film, and it is mainly composed of nanocrystalline $TiB_2$ with hexagonal structure, which resulted from the ion bombardment during the film growth. The hardness of the $TiB_2$ films increases with increasing ion energy, and approaches a maximum value of the $TiB_2$ films increases with increasing ion energy, and approaches a maximum value of 39 Gpa at ion energy of 85 keV. The tribological property of the TiB2 films is also improved by higher energy of 85keV. The tribological property of the $TiB_2$ films is also improved by higher energy ion beam bombardment. There is no major disparity in the mechanical properties of double-layer $TiB_2$/TiN coatings and TiN/$TiB_2$ coatings. Both show an improved wear resistance compared with single-layer $TiB_2$ films. The adhesion of double-layer coatings is also superior to that of single-layer films.

• 한국자기학회지
• /
• 제7권5호
• /
• pp.250-257
• /
• 1997

Ar+N$_{2}$ 가스분위기에서 반응성 스퍼터링법으로 제조된 Fe-Nb-B-N 박막의 미세구조 및 자기적 특성을 조사하였다. 질소첨가한 적정조성의 Fe-Nb-B-N 박막은 우수한 고주파 연자기 특성을 보였는데, 그 특성은 다음과 같다. 포화자화(4 .pi. M$_{s}$ )는 16.5 kG, 보자력(H$_{c}$)은 0.13 Oe, 1 MHz에서의 실효투자율은 약 5,000의 값을 나타내었다. 특히 실효투자율은 10 MHz까지 겨의 변화가 없었으며, 100 MHz에서도 약 2,000의 값을 보여 매우 우수한 고주파 특성을 가진 재료로 판단된다. 한편, 이러한 우수한 특성을 지닌 Fe-Nb-B-N 박막의 미세구조를 TEM으로 관찰한 결과, 적정 열처리온도인 590 .deg. C에서 열처리한 Fe-Nb-B-N 박막은 약 5 ~ 10 nm의 .alpha. -Fe phase, Nb-nitride의 석출물과 Nb-B rich 비정질상 등으로 이루어져 있음을 알 수 있었다. 반면에 N이 첨가되지 않은 Fe-Nb-B 박막의 경우에는 약 10 nm정도의 .alpha. -Fe결정립과 Nb-B rich 비정질상의 두가지 상으로 이루어져 있다. 따라서 N을 첨가한 경우에 더욱 미세한 .alpha. -Fe 결정립을 얻을 수 있음이 확인되었다. 이는 N 첨가로 인한 결정립의 미세화 효과 와 Nb-nitride 형성으로 인한 결정립 성장의 억제효과에 의한 것으로 생각된다. 따라서 Fe-Nb-B-N 박막의 우수한 연자기 특성은 결정립 미세화에 기인하는 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.473-474
• /
• 2006

Boron Phosphide films were deposited on (111) Si substrate at $650^{\circ}C$, by the reaction of B2H6 with PH3 using APCVD. N2 was carried out as carrier gas. The optimal gas rates were $20\;m{\ell}/min$ for B2H6, $60\;m{\ell}/min$ for PH3 and $1\;{\ell}/min$ for N2. After as grown the films were insitu annealed for 1hour in N2 ambient at $550^{\circ}C$ and measured. The measurement of AFM shows that the RMS is $29.626{\AA}$ for the reaction temperature at $650^{\circ}C$. The measurement of XRD shows that the films have the orientation of (101). Also, the measurement of AES is shown that the films have B13P2 stoichiometry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.1-17
• /
• 2015

$MgB_2$ thin films with superior superconducting properties are very promising for superconducting magnets, electronic devices and coated conductor electric power applications. A clear understanding of flux pinning mechanism in $MgB_2$ films could be a big aid in improving the performance of $MgB_2$ by the enhancement of $J_c$. The fabrication advancement and the understanding of flux pinning mechanism of $MgB_2$ thin and thick films fabricated by using hybrid physical-chemical vapor deposition (HPCVD) are reviewed. The distinct kind of $MgB_2$ films, such as single-crystal like $MgB_2$ thin films, $MgB_2$ epitaxial columnar thick films, and a-axis-oriented $MgB_2$ films are included for flux pinning mechanism investigation. Various attempts made by researchers to improve further the flux pinning property and $J_c$ performance by means of doping in $MgB_2$ thin films by using HPCVD are also summarized.