• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.892-895
• /
• 2003

This paper describes on RIE(Reactive Ion Etching) characteristics of 3C-SiC(Silicon Carbide) grown on Si(100) wafers. During RIE of 3C-SiC films in this work, $CHF_3$ gas is used to form of polymer as a side wall for excellent anisotropy etching. From this process, etch rates are obtained a $60{\sim}980{\AA}/min$ by various conditions such as $CHF_3$ gas flux, $O_2$ addition ratio, RF power and electrode distance. Also, approximately $40^{\circ}$ mesa structures are successfully formed at 100 mTorr $CHF_3$ gas flow ratio, 200 W RF power and 30 mm electrode distance. Moreover, vertical side wall is fabricated by anisotropy etching with 50% $O_2$ addition ratio and 25 mm electrode distance. Therefore, RIE of 3C-SiC films using $CHF_3$ could be applicable as fabrication process technology for high-temperature 3C-SiC MEMS applications.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.62-62
• /
• 1996

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.39-43
• /
• 2017

It was confirmed that the silicon thin films fabricated on the p-Si (100) substrates by using DIPAS (DiIsoPropylAminoSilane) and TDMA-Sb (Tris-DiMethylAminoAntimony) sources by RPCVD method were amorphous and n-type silicon. The fabricated amorphous n-type silicon films had electron carrier concentrations and electron mobilities ranged from $6.83{\times}10^{18}cm^{-3}$ to $1.27{\times}10^{19}cm^{-3}$ and from 62 to $89cm^2/V{\cdot}s$, respectively. The ideality factor of the pn junction diode fabricated on the p-Si (100) substrate was about 1.19 and the efficiency of the fabricated pn solar cell was 10.87%.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.39-44
• /
• 2023

본 연구에서는 습식 분극을 통하여 Si 다결정의 입자 크기를 조절을 하였으며, 입자 크기에 따른 Si 음극활물질의 용량 및 수명 특성 변화를 관찰하였다. 진동밀로 분쇄한 Si 입자를 습식법으로 분급한 시료의 입도를 분석한 결과 Si의 불균일한 입자 분포가 균일하게 조절이 되었다. Si를 24시간 분급한 시료의 d₅₀이 0.50 ㎛로 감소하였다. 전기화학적 특성 분석 결과, 입자 크기의 감소로 인하여 전극 내의 저항을 나타내는 R_ct 값이 현저하게 줄어들었다.분급하지 않은 Si 시료는 첫 사이클에서 2,869 mAh/g의 방전용량을 나타내었고, 100 사이클 후에는 85.7 mAh/g으로 방전용량이 감소하였다. Si를 24시간 분급한 시료의 경우에 초기에는 3,394 mAh/g의 용량을 보였으며, 100사이클 후에는 1,726 mAh/g의 용량을 유지하였다. 결과적으로 Si 입자의 크기가 감소할수록 방전용량이 증가하였으며, 사이클 수명도 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.648-651
• /
• 2004

Pb0.5Sr0.5TiO3(PST) thin films were deposited on the LaNiO3 (LNO(100))/Si and Pt/Ti/SiO2/Si substrates by the alkoxide-based sol-gel method. Structural and dielectric properties of PST thin films for the tunable microwave device applications were investigated. The PST films, which were directly grown on the Pt/Ti/SiO2/Si substrates showed the random orientation. For the LNO/Si substrates, the PST thin films exhibited highly (100) orientation. Compared with randomly oriented films, the highly (100)-oriented PST thin films showed better dielectric constant, tunability, and figure of merit (FOM). The dielectric constant, tunability, and FOM of the highly (100)-oriented PST thin film increased with increasing annealing temperature due to the decrease in lattice distortion. The differences in dielectric properties may be attributed to the change in the film stress and the in-plane oriented Polar axis depending on the substrate was used. The dielectric constants, dielectric loss and tunability of the PST thin films deposited on the LNO/Si substrates measured at 1 MHz were 483, 0.002, and 60.1%, respectively.

• 한국표면공학회지
• /
• 제34권1호
• /
• pp.33-38
• /
• 2001

10cm-diameter Si(100)∥$1.3\mu\textrm{m}$-X$1.3_2$X$1.3\mu\textrm{m}$-$SiO_2$∥Si(100) afers were prepared using a fast linear annealing (FLA) equipment. 1.3$\mu\textrm{m}$-thick $SiO_2$ films were grown by dry oxidation process. After cleaning and premating the wafers in a class 100 clean room, they were heat treated using with the FLA and conventional electric furnace. Bonded area and bond strength of wafer pairs were measured using a infrared (IR) camera and razor blade crack opening method, respectively. It was confinmed that the bonded area by FLA was around 99% and the bond strength value reached 2172mJ/$\m^2$, which is equivalent to theoritical bond strength. Our result implies that thick $SiO_2$ SOI may be prepared more easily by using $SiO_2$$SiO_2$ bonding interfaces then those of Si/$SiO_2$'s.

• 한국재료학회지
• /
• 제5권3호
• /
• pp.297-309
• /
• 1995

본 연구에서는 이온선보조증착법에 의해 Si(100)기판위에 정합성장된 $Si_{0.5}$Ge_{0.5}$층의 핵성성과 성장을 고찰하였다. 성장층에 대한 AFM(Atomic Force Microscopy), RHEED(Reflection High Energy Electron diffraction) 등의 분석결과 Si(100)기판위에 이온선보조증착에 의하여 성장된 $Si_{0.5}$Ge_{0.5}$층은 Stranski-Kranstanov(SK)기구로 성장되며, 300eV, 10 $\mu$A/$cm^{2}$의 Ar이온선을 조사시키는 경우 결정성이 향상되었고, SK 성장 방식의 임계두께가 증가하였다. Ar 이온선 조사에 의해 MBE에 의한 정합성장온도(55$0^{\circ}C$-$600^{\circ}C$)보다 훨씬 낮은 20$0^{\circ}C$에서 정합성장이 가능하였으며, $x_{mn}$값은 10.5%로 MBE에 의한 정합성장시 보고된 $x_{mn}$ 값보다 낮았다. 이온충돌에 의해 발생한 3차원 island의 분해와 표면확산의 증가가 $Si_{0.5}$Ge_{0.5}$층의 성장에 현저한 영향을 미쳤으며, 이온충돌의 영향은 3차원 island의 생성보다 3차원 island의 분해가 더 안정한 낮은 증착온도에서만 관찰되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.97-97
• /
• 2000

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.245-248
• /
• 2005

The physical and electrical properties of polycrystalline $\beta$-SiC were studied according to different nitrogen doping concentration. Nitrogen-doped SiC films were deposited by LPCVD(1ow pressure chemical vapor deposition) at $900^{\circ}C$ and 2 torr using $100\%\;H_2SiCl_2$ (35 sccm) and $5 \%\;C_2H_2$ in $H_2$(180 sccm) as the Si and C precursors, and $1\%\;NH_3$ in $H_2$(20-100 sccm) as the dopant source gas. The resistivity of SiC films decreased from $1.466{\Omega}{\cdot}cm$ with $NH_3$ of 20 sccm to $0.0358{\Omega}{\cdot}cm$ with 100 sccm. The surface roughness and crystalline structure of $\beta$-SiC did not depend upon the dopant concentration. The average surface roughness for each sample 19-21 nm and the average surface grain size is 165 nm. The peaks of SiC(111), SiC(220), SiC(311) and SiC(222) appeared in polycrystalline $\beta$-SiC films deposited on $Si/SiO_2$ substrate in XRD(X-ray diffraction) analysis. Resistance of nitrogen-doped SiC films decreased with increasing temperature. The variation of resistance ratio is much bigger in low doping, but the linearity of temperature dependent resistance variation is better in high doping. In case of SiC films deposited with 20 sccm and 100 sccm of $1\%\;NH_3$, the average of TCR(temperature coefficient of resistance) is -3456.1 ppm/$^{\circ}C$ and -1171.5 ppm/$^{\circ}C$, respectively.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.484-492
• /
• 1998

단결정 Si기판위의 Co/Ti 이중층으로부터 형성된 Co 실리사이드의 에피텍셜 성장기구에 대하여 조사하였다. 실리사이드화 과정중 Ti원자들이 저온상의 CoSi결정구조의 tetrahedral site들을 미리 점유해 있음으로 인하여, $CoSi_{2}$ 결정구조로 바뀌는 과정에서 Si원자들이 나중에 제위치를 차지하기 어렵게 되는 효과 때문이다. 그리고 Ti중간층은 반응의 초기단계에 Co-Ti-O 삼원계 화합물을 형성하는데, 이 화합물은 실리사이드화 과정중 반응 제어층으로 작용하여 에피텍셜 실리사이드 형성에 중요한 역할을 한다. 최종 열처리 층구조 Ti oxide/Co-Ti-Si/epi/$Cosi_{2}$(100) Si 이었다.