• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1049-1052
• /
• 2003

This study shows the change of the structural characteristic of AIN thin film deposition with the change of the deposition conditions such as Ar/$N_2$ gas ratio, operating pressure in chamber, and the distance between substrate and target in RF Magnetron Sputtering. The orientation and surface roughness of AIN thin film are studied by using XRD and AFM and the thickness is measured by using STYLUS PROFILER. While we can not identify the orientation of the thin film deposited in Ar only, we can obtain the (100) orientation of the thin film with the addition of $N_2$ to Ar. Especially the thin film deposited at 10% of Ar/$N_2$ gas ratio appears to be the most (100) oriented. The (100) orientation of thin film becomes weaker as the operating pressure becomes higher. The further distance between substrate and target is stronger the (100) orientation of the thin film is. The (100) orientation becomes weaker and (002) orientation starts to appear as the distance is shorter.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.619-623
• /
• 2006

FBAR(Film Bulk Acoustic Resonator) 소자의 공진특성을 결정하는 가장 중요한 요소는 압전막의 압전성을 들 수 있다. FBAR 압전막으로 유력한 ZnO 압전박막은 (002)면 c-축 우선배향성(preferred orientation)의 정도에 따라서 압전성이 결정된다. 그러므로 ZnO 박막의 우선배향성에 관한 연구는 많은 연구자들의 관심사가 되어왔다. 본 논문에서는 ZnO 보조씨드충(helped seed layer)을 이용하여 ZnO 압전박막의 우선배향성에 대하여 조사하였으며, rocking curve의 표준편차$(\sigma)$ 값이 $1.15^{\circ}$인 주상형 결정립을 가진 c-축 ZnO 압전박막이 우수한 압전특성을 나타내는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.716-722
• /
• 2003

ZnO thin films were deposited on Al and Pt electrodes by an RF reactive sputtering system for the fabrication of FBAR (film bulk acoustic wave resonator), and the effect of thermal treatment temperature on their c-axis preferred orientation was investigated. SEM experiments show that columnar structure of ZnO thin films were grown with c-axis normal to electrode material, and XRD experiments show that both ZnO films were grown with (002) plane preferred orientation, but larger diffraction peak was observed with Pt electrode. The peak intensity increased with higher thermal treatment temperature, but c-axis preferred orientation was diminished. The surface roughness of Al thin film was higher than that of Pt, and these affect the surface roughness of ZnO film deposited on the electrode. Though the preferred orientation with respect to Pt(111) plane was improved with higher thermal treatment temperature, this could not improve the c-axis orientation of ZnO film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1245-1247
• /
• 1995

In this paper, Analyzed structual property using SEM and XRD. The longer distance between substrate and target enhance crystalographic orientation of (110)plane, but inhibit growth of (002)plane. Also, deposited ZnO thin film on electrode layer inhibit crystalographic orientation of (002)plane, expecially Al electrode inhibit stronger than Pt layer. And using fabricated transducer, analyzed eletric and frequency characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1479-1481
• /
• 2002

AlN thin films were deposited on Si(100) and $SiO_2$/Si substrates using R.F. magnetron sputtering system. The effect of various deposition conditions on the crystal orientation of AlN films was investigated to obtain a highly (002)-oriented films. SAW filters were fabricated using AlN films with various thicknesses and their frequency response characterizations were measured. Experimental results showed that the (002)-orientation and surface roughness of AlN films played a crucial role of determining the frequency response of AlN SAW devices.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.99-109
• /
• 2004

The effect of trace metallic additives on microstructure, glossiness and hardness of Zinc electrodeposits was investigated by using sulfate bath and flow cell system. The preferred orientation of Zn deposits with Mg-Fe additives was (10$\ell$)+(002) mixed texture, while that of Zn deposits with Mg-Fe-Cr additives was ( $10\ell$). The preferred orientation of Zn deposits with Mg-Fe-X(X:Ni,Co) additives changed from ($10\ell$)+(002) to ($10\ell$) with increasing Mg additive from 5 to 10 g/$\ell$. The surface morphology of the Zinc deposits was closely related to the preferred orientation of the deposits. The glossiness of Zn deposits with Mg-Fe additives was similar to that of pure Zn deposit. The glossiness of Zn deposits with Mg-Fe-X(X:Ni,Cr) additives was lower than that of Zn deposits with Mg-Fe additives, while that of Zn deposits with Mg-Fe-Co additives was higher than that of Zn-Mg-Fe deposits. The hardness of Zn deposits with Mg-Fe-X(Ni,Co,Cr) increased with current density and amount of Mg additive. Hardness of Zn deposits was decreased and increased in comparison with Zn-Mg-Fe deposits for Mg-Fe-Co and Mg-Fe-Cr additives, respectively.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.246-250
• /
• 2000

Reactive radio frequency (RF)magnetron sputter has been used to deposit AlN thin film on a Si substrate. (002)Preferred orientation of AlN thin film has been obtained at low sputtering pressure and high $\textrm{N}_2$ concentration. Also it has been shown that properties of AlN thin film are affected by presputtering time. As presputtering time increased aluminum and nitride concentration of AlN thin film decreased. But oxygen concentration and grain size increased. The good preferred orientation was shown with the short presputtering time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.395-398
• /
• 2000

Reactive radio frequency (RF)magnetron sputter with incident angle has been used to deposit AlN thin film on a crystalline Si substrate. (002)Preferred orientation of AlN thin film has been obtained at low sputtering pressure. Also it has been shown that depostion rate of AIN thin film is affected by fraction Ar and $N_2$ partial pressure. But substrate temperature didn't affect depostion rate of AIN thin film . As sputtering pressure increased preferred orientation degraded. The internal stress changed from tensile stress to compressive stress as fraction of $N_2$ partial pressure increased. At low nitrogen partial pressure cermet$^{[1]}$ AIN thin film is obtained.

• 한국간호교육학회지
• /
• 제14권1호
• /
• pp.30-37
• /
• 2008

Purpose: This study proposed to examine the effects of a blended-learning orientation program executed for nursing students' clinical practice. Method: The participants were 61 nursing students in the experimental group and 57 in the control group. For the experimental group, a blended-learning orientation program was executed by e-learning (on-line) and lecture-led training (off-line) from two-week before the start of clinical practice in medical-surgical nursing. For the control group, orientation was given in the traditional lecture-led training by distributing printed materials before clinical practice. A pre-test was conducted on the experimental and control group before clinical practice, and a post-test was conducted after two-week of clinical practice in order to examine the effects of the orientation program. Results: After two-week of clinical practice, differences were observed between the experimental group and the control group in adaptation to clinical practice (F=10.242, p=.002), communication skills (F=4.305, p=.040) and clinical competence (F=6.823, p=.010). Conclusions: The blended-learning orientation program enhanced nursing students' adaptation to clinical practice, improved their communication skill and increased their clinical competence. Accordingly, it is recommended to develop and apply practical education using blended-learning in the area of nursing science.