• Journal of Korea Foundry Society
• /
• v.28 no.1
• /
• pp.37-40
• /
• 2008

본 연구는 ADI의 기계적 성질을 개선하고자 오스테나이트화 과정에서 초기 변태온도를 $900^{\circ}C$ (${\gamma}$ 구역)에서 시작하여 $800^{\circ}C$까지(${\alpha}+{\gamma}$ 구역) 일정한 냉각제어에 의해 오스템퍼링을 한다. 여기서 Full ADI에서 생성되는 고탄소 오스테나이트 조직을 저탄소 오스테나이트로 유도하고 미세한 침상의 Full ADI조직을 연성이 높은 조대한 아공석 페라이트 조직이 생성되도록 하여 Semi ADI를 만든다. Full ADI와 Semi ADI의 기계적 성질 및 피로강도를 연구한 결과 Full ADI와 Semi ADI의 정적강도는 유사하지만, 피로강도는 Semi ADI의 기지조직의 변화에 기인하여 Full ADI보다 피로강도가 높게 나타났다. 이러한 현상은 Semi ADI의 조대한 페라이트가 균열개구 저항력이 낮아 초기에는 쉽게 개구되지만, 균열개구와 동시에 균열선단에서 큰 소성역이 발생되어 균열성장이 지연하는 효과로 판단된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2003

In this paper, the numerical characteristics of the recently developed Envelope ADI-FDTD are investigated. Through numerical simulations, it is shown that the unconditional stability of the Envelope ADI-FDTD is independent of time step size and we can get better dispersion accuracy than the traditional ADI-FDTD by analyzing the envelope of the signal. This fact gives the opportunity for extending the temporal step size to the Nyquist limit in certain cases. Numerical results show that the Envelope ADI-FDTD can be used as an efficient electromagnetic analysis tool especially in the single frequency or band limited systems.

• Communications of the Korean Mathematical Society
• /
• v.11 no.2
• /
• pp.495-501
• /
• 1996

There is currently a regain of interest in ADI (Alternating Direction Implicit) method as a preconditioner for iterative Method for solving large sparse linear systems, because of its suitability for parallel computation. However the classical ADI is not applicable to FE(Finite Element) matrices. In this paper wer propose a Block-ADI method, which is applicable to Finite Element metrices. The new approach is a combination of classical ADI method and domain decompositi on. Also, we provide a partial proof of the convergence based on the results from the regular splittings, in case the discretization metrix is symmetric positive definite.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.5
• /
• pp.181-186
• /
• 2003

This paper presents a numerical dispersion relation for the two-dimensional finite-difference time-domain method based on the alternating-direction implicit time-marching scheme(2-D ADI-FDTD), which method has the potential to considerably reduce tile number of time iterations especially in case where the fine spatial lattice relative to the wavelength is used to resolve fine geometrical features. The proposed analytical relation for 2-D ADI-FDTD is compared with those relations in the Previous works. Through numerical tests, the dispersion equation of this work was shown as correct one for 2-D ADI-FDTD.

• Journal of the Korean Society for Heat Treatment
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1988

ADI는 우수한 기계적 성질과 경제성을 바탕으로 80년내 들어 중요한 공업소재의 하나가 되었다. 성공적인 ADI 개발에 중요시 되는 요소로는 오스테나이트화 온도와 시간, 오스템퍼링 온도와 시간, 합금원소, 주물의 질 등이다. 온도와 시간은 ADI의 성능과 매우 밀접한 관계가 있으므로 엄격한 제어가 필요하다. 양질의 주물만이 양질의 ADI을 생산할 수 있으므로 열처리 전 주물의 질에 대한 관리가 필요하다. ADI의 우수한 성능으로는 고강도, 고연성 및 고인성, 내피로성, 내마모성 등이 있다. ADI의 성능을 이용하여 응용될 수 있는 분야는 기어 및 자동차 부품등의 단조강철 대체품과 주조성 및 가공성 등을 이용한 일반 공업제품에 이르기까지 다양하다. 경제적 측면에서의 ADI의 잇점은 생산에너지 및 가공비의 절감 등이다. 새 공업 소재로서의 ADI의 전망은 기술적, 경제적 측면에서 보강되어야 할 사항이 있으나, 이의 최대 장점인 우수한 강도 및 연성, 내 피로성, 파괴인성의 조합적인 기계적 성질과 강철 단조품에 대한 경제성, 주조가 부여하는 부품설계상의 융통성을 바탕으로 대단히 밝다고 할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.178-184
• /
• 2007

A new adaptive alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method is proposed to obtain isotropic wave propagation for all directional angles. We add the square terms of time-step multiplied by the spatial derivatives of x and y as a perturbed term to the conventional ADI-FDTD and can find the optimization coefficient of square terms of time-step to generate the minimum anisotropy. The new ADI-FDTD is also stable, even when its time-step is greater than the Courant-Friedrich-Levy (CFL) limit. The characteristic equation of the dispersion relation governing the new method is derived and compared with the theoretical and numerical results for the conventional ADI-FDTD and perturbed ADI-FDTD methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.52-63
• /
• 2002

In this paper, we developed a numerical analysis model by using ADI-FDTD method to analyze three-dimensional interconnect structure. We discretized maxwell's curl equation by using ADI-FDTD. We introduced PML(Perfectly Matched Layer) absorbing boundary condition to solve the effect of the reflected wave at the interface. Evaluating the numerical model of PML and ADI-FDTD, we simulated the electric field distribution in time domain. We compare standard FDTD with ADI-FDTD, and analysis the result.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.618-624
• /
• 1995

In order to evaluate the acceptability of Korea and Codex maximum residue limits (MRLs), theoretical maximum daily intake (TMDI) by Korean population was calculated from MRL and food factor and compared with acceptable daily intake (ADI). The percent ratio of TMDI to ADI for 105 pesticides whose MRL was established in Korea was mostly below 80% and 13 pesticides exceeded the ADI. Among 82 pesticides with Codex MRL, 20 items exceeded the ADI. The main causes of exceeding the ADI according to Korea or Codex MRLs were pointed out for 22 items and it was needed to set measures to assure a safety margin.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.101-112
• /
• 2004

In this paper, we developed a numerical analysis model by using ADI-FDTD method to analyze three-dimensional interconnect structure. We discretized maxwell's curl equation by using ADI-FDTD. Using ADI-FDTD method, a sampler circuit designed from 3.3 V CMOS technology is simplified to 3-metal line structure. Using this simplified structure, the time delay and signal distortion of complex interconnects are investigated. As results of simulation, 5∼10 ps of delay time and 0.1∼0.2 V of signal distortion are measured. As demonstrated in this paper, the full-wave analysis using ADI-FDTD exhibits a promise for accurate modeling of electromagnetic phenomena in high-speed VLSI interconnect.

• Molecules and Cells
• /
• v.25 no.2
• /
• pp.305-311
• /
• 2008

After successful clinical application, arginine deiminase (ADI) has been proposed to be a new cancer therapeutic. In the present study, we examined the effect of ADI in combination with ionizing radiation (IR) on MCF-7 cell growth and clonogenic cell death. Cell growth was inhibited by IR in a dose-dependent manner and ADI enhanced the radiosensitivity. ADI itself did not suppress the growth of MCF-7 cells due to the high level of expression of argininosuccinate synthetase (ASS), which convert citrulline, a product of arginine degradation by ADI, to arginine. Previously, it was suggested that ammonia, another product of arginine degradation by ADI, is the main cause of the growth inhibition of irradiated hepatoma cells contaminated with ADI-expressing mycoplasma [van Rijn et al. (2003)]. However, we found that ammonia is not the only factor that enhances radiosensitivity, as enhancement was also observed in the absence of ammonia. In order to identify the enhancing effect, levels of ASS and proteins related to the cell cycle were examined. ASS was unchanged by ADI plus IR, but p21 (a CDK inhibitor) was upregulated and c-Myc downregulated. These findings indicate that changes in the expressions of cell cycle proteins are involved in the enhancement of radiosensitivity by ADI. We suggest that ADI is a potential adjunct to cancer therapy.