• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.97.2-97.2
• /
• 2000

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.259-263
• /
• 1998

WSi2/CVD-Si/SiO2/Si-substrate의 폴리사이드 구조에서 실리콘 증착 POCl3 확산 그리고 WSi2 증착 유무에 따른 Thin oxide 특성을 연구했다 WSi2 막을 증착하지 않은 CVD-Si/SiO2/Si-substrate 구조에서 CVD-Si을 po-lycrystalline-Si으로 증착한 시편이 amorphous-Si을 증착한 시편보다 산화막 불량이 적다 WSi2 를 증착시킨 WSi2/CVD-Si/SiO2./Si-substrate의 구조에서 CVD-Si의 polycrystalline-Si 혹든 amorphous-Si 의 막 증착에 따른 thin oxide의 불량율 차이는 미미하다 산화막 불량은 CVD-Si에 확산시킨 인(P) 증가 즉 면저항(sheet resistance) 감소로 증가한다. Thin oxide의 절연특성은 WSi2 증착으로 저하된다 WSi2 증착으로 산화막 두께는 증가하나 막 특성은 열등해져 산화막 절연성이 떨어진다.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.263-270
• /
• 1990

WSi$_{x}$박막을 Polycide구조로 저압화학증착법에 의해 제작한 후, 열처리를 N$_{2}$분위기에서 30분간 여러온도로 수행하였다. WSi$_{x}$박막의 전기비저항은 열처리온도의 증가에 따라 감소하였으며 1000.deg.C이상으로 열처리한 시편의 경우, 하부 다결정실리콘층의 도우핑여부에 관계없이 35.mu.m.OMEGA.-cm 정도를 나타내었다. 560.deg.C의 열처리에서 WSi$_{x}$박막은 정방정의 WSi$_{2}$ 결정질로 결정화가 되기 시작하였고 열처리온도의 증가에 따라 WSi$_{2}$결정립의 성장도 관찰되었다. 열처리온도에 따른 전기저항의 변화는 WSi$_{x}$박막의 결정립크기와 밀접한 관계가 있었다. 증착된 WSi$_{x}$박막내의 광잉실리콘원자들이 열처리중에 하부의 다결정실리콘층으로 재분배됨을 AES분석에 의해 확인하였다. Hall 측정결과 900.deg.C이상으로 열처리된 시편은 Hole도전체의 거동을 나타내었고 800.deg.C이하로 열처리된 시편은 electron도전체의 거동을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.55-61
• /
• 1993

In the WSi2/CVD-Si/SiO2 polycide structure, electrode resistance and its property were studied as a function of deposition temperature and thickness of CVD-Si, diffusion condition of POCl3, and WSi2 being deposited or not. Resistivity of poly-Si is decreased with increment of thickness in the case of POCl3 diffusion of low sheet resistance, but it is increased in the case of high sheet resistance. The resistivity of amorphous-Si is generally lower than that of poly-Si. Initial sheet resistance of poly-Si/WSi2 gate electrode is affected by the thickness and resistance of poly-Si layer, but final resistance after anneal, 900$^{\circ}C$/30min/N2, is only determined by WSi2 layer. Flourine diffuses into SiO2, but tungsten does not. In spite of out-diffusion of phosphorus into WSi2 layer, the sheet resistance is not changed.

• Korean Journal of Materials Research
• /
• v.14 no.6
• /
• pp.402-406
• /
• 2004

$WSi_2$, $TiSi_2$, $CoSi_2$, and $TaSi_2$ are general silicides used today in semiconductor devices. $WSi_2$ thin films have been proposed, studied and used recently in CMOS technology extensively to reduce sheet resistance of polysilicon and $n^{+}$ region. However, there are several serious problems encountered because $WSi_2$ is oxidized and forms a native oxide layer at the interface between $WSi_2$ and $Si_3$$N_4$. In this study, we have introduced 20 $slm-N_2$ gas from top to bottom of the furnace in order to control native oxide films between $WSi_2$ and $Si_3$$N_4$ film. In resulting SEM photographs, we have observed that the native oxide films at the surface of $WSi_2$ film are removed using the long injector system.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.327-332
• /
• 1996

In this study, the effects of $WSi_x$, thickness and fluorine concentration in tungsten polycide gate structure on gate oxide were investigated. As $WSi_x$, thickness increases, gate oxide thickness increases with fluorine incorporation in gate oxide, and time-to-breakdown($T_{BD,50%}$) of oxide decreases. The stress change with $WSi_x$ thickness was also examined. But it is understood that the dominant factor to degrade gate oxide properties is not the stress but the fluorine, incorporated during $WSi_x$ deposition, diffused into $WSiO_2$ after heat treatment. In order to understand the effect of fluorine diffusion into oxidem fluorine ion implanted gates were compared. The thickness variation and $T_{BD,50%}$ of gate oxide is saturated over 600 $\AA$ thickness of $WSi_x$. The TEM and SIMS studies show the microstructure less than 600 $\AA$ thickness is dense and flat in surface. However, over 600$\AA$, the microstructure of $WSi_x$ is divided into two parts: upper porous phase with rugged surface and lower dense phase with smmoth interface. And this upper phase is transformed into oxygen rich crystalline phase after annealing, and the fluorine is captured in this layer. Therefore, the fluorine diffusion into the gate oxide is saturated.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.64-67
• /
• 2000

Tungsten silicide(WSi$_2$) is proposed for the alternate gate electrode of ULSI MOS devices. Good structural property and low resistivity of WSi$_2$ deposited by a low pressure chemical vapor deposition(LPCVD) method directly on SiO$_2$ is obtained after annealing. Especially, WSi$_2$-SiO2 interface remains flat after annealing tungsten silicide at high temperature. Electrical characteristics of annealed WSi$_2$-SiO$_2$-Si(MOS) capacitors were improved in view of charge trapping.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.191-192
• /
• 2010

높은 유전상수를 가지는 터널 장벽물질 들은 플래쉬메모리 및 나노 부유게이트 메모리 소자에서 터널의 두께 및 밴드갭 구조의 변형을 통하여 단일층의 $SiO_2$ 터널장벽에 비하여 동작속도를 향상시키고 누설전류를 줄이며 전하보존 특성을 높여줄 수 있다.[1-3] 본 연구에서는 $Al_2O_3/HfO/Al_2O_3$구조의 고 유전체 터널장벽을 사용하여 $WSi_2$ 나노입자를 가지게 되는 metal-oxide-semiconductor(MOS)구조의 커패시터를 제작하여 전기적인 특성을 확인하였다. p형 (100) Si기판 위에 $Al_2O_3/HfO/Al_2O_3$ (AHA)의 터널장벽구조를 원자층 단일 증착법을 이용하여 $350^{\circ}C$에서 각각 2 nm/1 nm/3 nm 두께로 증착시킨 다음, $WSi_2$ 나노입자를 제작하기 위하여 얇은 $WSi_2$ 박막을 마그네트론 스퍼터링법으로 3 - 4 nm의 두께로 증착시켰다. 그 후 $N_2$분위기에서 급속열처리 장치로 $900^{\circ}C$에서 1분간의 열처리과정을 통하여 AHA로 이루어진 터널 장벽위에 $WSi_2$ 나노입자들이 형성할 수 있었다. 그리고 초 고진공 마그네트론 스퍼터링장치로 $SiO_2$ 컨트롤 절연막을 20 nm 증착하고, 마지막으로 열 증기로 200 nm의 알루미늄 게이트 전극을 증착하여 소자를 완성하였다. 그림 1은 AHA 터널장벽을 이용한 $WSi_2$ 나노 부유게이트 커패시터 구조의 1-MHz 전기용량-전압 특성을 보여준다. 여기서, ${\pm}3\;V$에서 ${\pm}9\;V$까지 게이트전압을 점차적으로 증가시켰을 때 메모리창은 최대 4.6 V로 나타났다. 따라서 AHA의 고 유전체 터널층을 가지는 $WSi_2$ 나노입자 커패시터 구조가 차세대 비 휘발성 메모리로서 충분히 사용가능함을 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.832-835
• /
• 2001

We report the structural and electrical properties of hafnium oxide (HfO$_2$) films with tungsten silicide (WSi$_2$) metal gate. In this study, HfO$_2$thin films were fabricated by oxidation of sputtered Hf metal films on Si, and WSi$_2$was deposited directly on HfO$_2$by LPCVD. The hysteresis windows in C-V curves of the WSi$_2$HfO$_2$/Si MOS capacitors were negligible (<20 mV), and had no dependence on frequency from 10 kHz to 1 MHz and bias ramp rate from 10 mV to 1 V. In addition, leakage current was very low in the range of 10$^{-9}$ ~10$^{-10}$ A to ~ 1 V, which was due to the formation of interfacial hafnium silicate layer between HfO$_2$and Si. After PMA (post metallization annealing) of the WSi$_2$/HfO$_2$/Si MOS capacitors at 500 $^{\circ}C$ EOT (equivalent oxide thickness) was reduced from 26 to 22 $\AA$ and the leakage current was reduced by approximately one order as compared to that measured before annealing. These results indicate that the effect of fluorine diffusion is negligible and annealing minimizes the etching damage.

• KCID journal
• /
• v.4 no.2
• /
• pp.48-61
• /
• 1997

Drought index calculation method using principal hydrological factors, such as precipitation amount and reservoir storage ratio, can estimate the duration and the intensity of drought. It is not easy to establish an universal criteria of drought, since th