• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.895-900
• /
• 1996

Ba(Ti1-xSnx)4O9 powder was synthesized by oxalate method. With the substitution of Sn into Ti site the sintered BaTiO4 crystal phase was stabilized due to the formation of solid solution. The optimal amounts of Sn solutbility for formation of BaTi4O9 crystalline phase was 0.16mole and of Sn was substituted and sintering was done at 135$0^{\circ}C$ for 30 minutes long rod type crystal was well developed and the highest Q value was obtained. But dielectric constant wasnearly constant without regarding to the Sn addition and the sintering time.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.406-410
• /
• 1992

본 논문에서는 MgFe$_{2}$O$_{4}$ 세라믹스의 구조적 특성을 개선하기 위하여 TiO$_{2}$를 0-10[wt%] 첨가하여 세라믹스를 만들고 TiO$_{2}$가 습도센서용 MgFe$_{2}$O$_{4}$ 세라믹스의 구조적 특성에 미치는 영향을 조사하였다. 각 시편은 TiO$_{2}$가 첨가되는 양이 증대함에 따라 NgTi$_{2}$O$_{5}$의 이상이 나타났다. TiO$_{2}$의 첨가량이 6[wt%]일 때 까지는 시편의 밀도가 증가하여 기공율의 저하를 가져왔고 기공의 크기가 최소가 되는 조성은 5[wt%]의 TiO$_{2}$가 첨가되었을 때이며 이때의 평균 기공의 크기는 1615[.angs.]이었다. 따라서 5[wt%]의 TiO$_{2}$를 첨가했을 때가 기공의 크기 조절에 최적이라고 생각되며 센서용 기판으로 응용하기 적합하다고 생각된다.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2015

Spherical Li₄Ti₅O₁₂ and Li₄Ti₅O₁₂ carbon nanotube (CNT) composites were synthesized using a colloid system. The electrochemical properties of the composites were thoroughly examined to determine their applicability as hybrid capacitor anodes. The electrical conductivity of the spherical Li₄Ti₅O₁₂-CNT composite was improved over that of the spherical Li₄Ti₅O₁₂ composite. The synthesized composites were utilized as the anode of a hybrid capacitor, which was assembled with an activated carbon (AC) positive electrode. The CNTs attached on the spherical Li₄Ti₅O₁₂ particles contributed to a 51% reduction of the equivalent series of resistance of the Li₄Ti₅O₁₂-CNTs/AC hybrid capacitor compared to the Li₄Ti₅O₁₂/AC hybrid capacitor. Moreover, the Li₄Ti₅O₁₂-CNTs/AC hybrid capacitor showed a larger capacitance than the Li₄Ti₅O₁₂/AC hybrid capacitor; specifically, the Li₄Ti₅O₁₂-CNT/AC hybrid capacitor showed 1.6 times greater capacitance at 40 cycles with a 10 mA cm⁻² loading current density.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.114-115
• /
• 2007

In this study, low temperature sintering property of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with sintering adds were investigated for LTCC application which enable to cofiring with Ag electrode. $TiTe_3O_8$ mixed with $MgTiO_3$ to improve the temperature property. In the X-ray diffraction patterns, the columbite structure of $TiTe_3O_3$ phase and ilmenite structure of $MgTiO_3$ phase were coexisted in all specimens. In the case of $H_3BO_3$ addition, the bulk density and dielectric constant were decreased but quality factor was increased with amount of $H_3BO_3$ additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3+xwt%H_3BO_3$ ceramics were moved to positive direction. In another case, SnO addition, the bulk density and dielectric constant were increased but Quality factor was decreased with amount of SnO additions. The TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$+ywt%SnO ceramics were shifted to negative direction. The dielectric constant, quality factor and TCRF of the $0.6TiTe_3O_8-0.4MgTiO_3$ ceramics with $2wt%H_3BO_3$ and 2.5wt%SnO sintered at $830^{\circ}C$ for 1h, were 28.5, 39,570GHz, $+9.34ppm/^{\circ}C$ and 29.86, 35,80000z, $-0.58ppm/^{\circ}C$, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1541-1543
• /
• 2003

The microwave dielectric properties of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were investigated. All sample of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were prepared by the conventional mixed oxide method, and sintered in the temperature of $1350^{\circ}C{\sim}1450^{\circ}C$. The structural properties of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were investigated by the X-ray diffraction meter. According to the X-ray diffraction patterns of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics, the major phase of the hexagonal $0.6Mg_4Ta_2O_9-0.4TiO_2$ were presented, In the case of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics sintered at $1400^{\circ}C$ for 5hr., the dielectric constant, quality factor and temperature coefficient of resonant frequency were 12.19, 109.411GHz, -17.21ppm/$^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.740-746
• /
• 1993

TiO2-SnO2 fine powders prepared by coprecipitation from TiCl4-SnCl4 aqueous solution, and their crystal structures were studied. All the TiO2-SnO2 fine powders calcined at 180~$700^{\circ}C$ showed the complete solid solution between TiO2(rutile structure) and SnO2(rutile structure). This crystal structure of TiO2-SnO2 powders is thought to be originated mainly from the heterogeneous nucleation of Ti-hydroxde on the Sn-hydroxide with coherent structure.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1331-1336
• /
• 1995

The glass-ceramics for ferro-electric were made from compositions of 70PbO.16TiO2.8SiO2.4B2O3.2AlPO4 (wt%) and 67.5PbO.20TiO2.8.5SiO2.2B2O3.2AlPO4 (wt%). The crystallization kinetics for PbTiO3 crystalline phase formation from glass was studied using non-isothermal DSC techniques. The values of activation energy, ΔE using variables of heating rate and temperature were calculated at various reaction fractions obtained from peak area over DSC. The results indicated that activation energy was lowest at 60% reaction fractions and the activation energy of glass containing 20.0 wt% TiO2 is higher than that of glass containing 16.0 wt% TiO2. The crystallization mechanism was three dimensional growth (n=4).

• Journal of the Korean institute of surface engineering
• /
• v.35 no.6
• /
• pp.383-390
• /
• 2002

To investigate behaviors of Ti and O elements and microstructures of anodic titanium oxide films, the films were prepared by anodizing pure titanium in $H_2$S $O_4$, $H_3$P $O_4$, and $H_2O$$_2$ mixed solution at 180V. The microstructures and chemical states of the elements were analyzed using SEM, X-ray mapping, AFM, XRD, XPS (depth profile). The films formed on a titanium substrate showed porous layers which were composed of pore and wall, And with increasing anodizing time a hexagonal shape of cell structures were dominant and solace roughness increased. From the XRD result the structure of the Ti $O_2$ layer was anatase type of crystal on the whole. In the XPS spectra it was found that Ti and O were chemically binded in forms of Ti $O_2$, TiOH, $Ti_2$ $O_3$ at Ti 2p, and Ti $O_2$, $Ti_2$ $O_3$, $P_2$ $O_{5}$, S $O_4^{2-}$ at O ls respectively. Concentration of Ti $O_2$ decreased as the depth increased from the surface of the oxide film towards the substrate, but to the contrary concentrations of TiOH and $Ti_2$ $O_3$ increased.d.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.103-107
• /
• 2014

Poly(acrylonitrile-butadiene-styrene) (ABS) composite sheets containing titanium dioxide ($TiO_2$), barium sulfate ($BaSO_4$), calcium carbonate ($CaCO_3$) were prepared by using a co-rotating twin screw extruder, and the reflectance and flexural modulus of the composite sheets were measured. The fillers were well dispersed in ABS matrix. The reflectance of composite sheet was increased with increasing $TiO_2$ and $BaSO_4$ content. Sheet having $TiO_2$ 20 wt% composition, with 5~20 wt% $BaSO_4$ resulted in more than 95% of reflectance. The flexural modulus of composite sheet was increased from 1864 MPa for $ABS/TiO_2/BaSO_4$ 85/10/5 (w/w/w) to 3134 MPa for $ABS/TiO_2/BaSO_4$ 55/20/25 (w/w/w).

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.915-920
• /
• 2004

The main phase of $BaTi_{4}O_9$-based ceramics was transformed to $BaTi_{5}O_{11}$ caused by the sintering with borosilicate glass, which was analyzed by using XRD and TEM. We considered that the phase change from $BaTi_{4}O_9$-based ceramics to the Ti-rich $BaTi_{5}O_{11}$ phase resulted from borosilicate glass selective absorbing of Ba ions from the $BaTi_{4}O_9$. In these results, we found a dependence on the amounts of the glass frits and the annealing temperature, and the phase change is also dependent of the main phases of $Ba_{4}Ti_{13}O_{30},\;and\;Ba_{2}Ti_{9}O_{20}$, which are involved in the $BaO-TiO_2-based$ Ti-rich region. In the case of sintering of middle- and high- permittivity material with additional glass frits for middle- and high- dielectric coefficients LTCC composition, control of weight fraction of the glass frits accompanying low-temperature sintering property with appropriate phase change is required.