• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell 구조 나노 미립자가 졸-겔법에 의해서 제조되었고, TiO$_2$ shell의 형상과 결정성이 TEM과 UV-Vis. absorption spectrometer에 의해서 조사되었다. Au/TiO$_2$ core-shell 나노 미립자는 Au 콜로이드 에탄올 수용액 중에서 TOAA(Titanium Oxide Acethylacetonate)의 가수분해에 의해 합성될 수 있었다. Au 나노 미립자의 표면에 형성된 TiO$_2$ shell의 두께는 약 1 nm이었다. TiO$_2$ shell의 결정성을 조사하기 위하여. TiO$_2$가 피복된 Au 콜로이드 에탄올 용액에 254 nm의 자외선과 $^{60}$Co의 방사선을 조사하였다. Au 나노 미립자의 surface plasmon 현상은 방사선이 조사되었을 때만 나타났고, 이 결과로부터 TiO$_2$ shell은 비정질 상태임을 알 수 있었으며, Au의 분산성 향상을 위해 표면에 처리된 MUA(Mercaptoundecanoic Acid)층은 전자의 이동을 방해하는 장애물로 작용하지 않음을 확인할 수 있었다.

• 한국재료학회지
• /
• 제16권8호
• /
• pp.524-528
• /
• 2006

On the synthesis of Au/$TiO_2$ core-shell structure nanoparticle, the effect of concentration of $Ti^{4+}$ and reaction temperature on the morphology and optical property of Au/$TiO_2$ core-shell nanoparticles is examined. A gold colloid was prepared by $HAuCl_4{\cdot}4H_2O\;and\;C_6H_5Na_3{\cdot}2H_2O$. Titanium stock solution was prepared by mixing solution of titanium(IV) isopropoxide (TTIP) and triethanolamine (TEOA). The concentrations of $Ti^{4+}$ stock solution were adjusted to $10.01{\sim}0.3$ mM, and then the gold colloid is added to the $Ti^{4+}$ stock solution. Au/$TiO_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of the $Ti^{4+}$ stock solution at $80^{\circ}C$. The size of synthesized Au nanoparticles was 15 nm. The thickness of $TiO_2$ shell on the surface of gold particles was about 10 nm. The absorption peak of synthesized Au/$TiO_2$ core-shell nanoparticles shifted towards the red end of the spectrum by about 3 nm because of the formation of $TiO_2$ shell on the surface of gold particles. The good $TiO_2$ shell is produced when $Ti^{4+}$ concentration is varied between 0.01 and 0.05 mM, and reaction temperature is maintained at $80^{\circ}C$. The crystal structure of $TiO_2$ shell was amorphous.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.366-366
• /
• 2011

이성분 산화물인 ZnO/$TiO_2$ core-shell 나노입자는 core-shell 구조의 특성과 이성분 산화물의 상호작용에 의해서 염료감응형 태양전지의 효율향상을 기대할 수 있다. Znic acetate($Zn_2(CH_3COO)$)와 Titanium(IV) butoxide($Ti(OBu)_4$)를 이용하여 ZnO 나노입자를 수열합성하고 그 주의에 $TiO_2$을 가수분해 반응을 이용하여 둘러싸는 core-shell형태의 물질을 합성하였다. 그 이후 결정성 및 유기물 제거를 위해서 4시간 동안 고온에서 소성하였다. SEM 결과에 따르면 소성 온도를 600도까지 증가시키면 ZnO의 경우 나노입자의 크기가 증가하는 경향을 확인하였다. 하지만 core-shell의 경우는 ZnO의 뭉침현상을 $TiO_2$이 방해하여 초기합성된 크기와 동일한 크기를 유지하는 것을 확인하였다. 또한 XRD 결과에 따르면 주변에 형성된 $TiO_2$ 이외에 $Zn_2TiO_4$의 spinel 구조를 가지는 물질이 합성되는 것을 확인할 수 있었다. 합성된 core-shell 구조의 나노입자는 약 40~50 nm의 크기를 가지고 600도에서 소성된 입자의 경우 산소 정공이 거의 없는 약 3 eV의 밴드갭을 가지는 물질로 합성이 되었다. Core-shell 나노입자의 경우 염료 감응형 태양전지의 반도체 물질로 응용 가능할 것으로 판단된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.29-29
• /
• 2003

• 공업화학
• /
• 제31권4호
• /
• pp.390-397
• /
• 2020

To synthesize non-corrosive metallic gold colored α-Al₂O₃ nanoplate-TiO₂ core-shell pigments with controlled roughness, we systematically checked the morphological variation of the TiO₂ shell with the mole ratio of TiCl₄ and NaOH from 1 : 1 to 1 : 1.5, 1 : 2, 1 : 2.5, 1 : 3, 1 : 3.5, and 1 : 4. The more increased mole ratio of TiCl₄ and NaOH resulted in the smoother TiO₂ shell due to the promoted formation of anatase TiO₂ than that of the rutile one. By the heat-treatment of pigments at 500 ℃, we could improve the adhesiveness between TiO₂ shell and α-Al₂O₃ nanoplates without changing their topology and roughness. In addition, the α-Al₂O₃ nanoplate with the robust TiO₂ by heat-treatment exhibited comparable photo-stability against photo-catalytic degradation by UV exposure compared with the commercially available α-Al₂O₃/TiO₂ lustering pigment.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.746-755
• /
• 2017

본 연구에서는 $CeO_2$ 표면에 $Ti(SO_4)_2$의 가수 분해를 이용하여 $TiO_2$를 성장시켜 코어-쉘 구조를 가지는 세라믹 나노입자를 합성 하였다. $CeO_2/TiO_2$ 코어-쉘 합성에서는 $CeO_2:TiO_2$의 몰비, 반응 시간, 반응 온도, $CeO_2$ 슬러리 농도, $Ti(SO_4)_2$의 pH 조절을 통하여 코어-쉘 구조를 가지는 최적의 합성 조건을 찾았다. $CeO_2:TiO_2$의 최적의 몰비는 1:0.2~1.1, 최적의 반응 시간은 24 시간, 최적의 $CeO_2$ 슬러리 농도는 1%, 최적의 반응 온도는 $50^{\circ}C$임을 알 수 있었다. $NH_4OH$ 수용액을 이용하여 $Ti(SO_4)_2$ 의 pH를 1로 맞추어 $CeO_2$ 슬러리에 적하하면 10%의 농도를 가지는 $CeO_2$ 슬러리에서도 $CeO_2/TiO_2$ 코어-쉘 나노 입자를 합성할 수 있었다. $80^{\circ}C$이상의 높은 온도에서 반응을 시키면 $CeO_2/TiO_2$ 코어-쉘 구조가 아닌 독립된 $TiO_2$ 나노 입자를 형성함을 알 수 있었다. 최적의 반응 온도는 $50^{\circ}C$로서 가장 좋은 구조의 $CeO_2/TiO_2$ 코어-쉘이 합성되었다.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.423-428
• /
• 2014

We synthesized Fe-doped $TiO_2/{\alpha}-Fe_2O_3$ core-shell nanowires(NWs) by means of a co-electrospinning method and demonstrated their magnetic properties. To investigate the structural, morphological, chemical, and magnetic properties of the samples, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy were used, as was a vibrating sample magnetometer. The morphology of the nanostructures obtained after calcination at $500^{\circ}C$ exhibited core/shell NWs consisting of $TiO_2$ in the core region and ${\alpha}-Fe_2O_3$ in the shell region. In addition, the XPS results confirmed the formation of Fe-doped $TiO_2$ by the doping effect of $Fe^{3+}$ ions into the $TiO_2$ lattice, which can affect the ferromagnetic properties in the core region. For comparison, pure ${\alpha}-Fe_2O_3$ NWs were also fabricated using an electrospinning method. With regard to the magnetic properties, the Fe-doped $TiO_2/{\alpha}-Fe_2O_3$ core-shell NWs exhibited improved saturation magnetization(Ms) of approximately ~2.96 emu/g, which is approximately 6.1 times larger than that of pure ${\alpha}-Fe_2O_3$ NWs. The performance enhancement can be explained by three main mechanisms: the doping effect of Fe ions into the $TiO_2$ lattice, the size effect of the $Fe_2O3_$ nanoparticles, and the structural effect of the core-shell nanostructures.

• 센서학회지
• /
• 제28권4호
• /
• pp.225-230
• /
• 2019

$Au@TiO_2$ core-shell decorated rGO nanocomposite (NC) was prepared using a simple solvothermal method followed by heat treatment for gas sensor application. The crystal structure and morphology of the composites were characterized by X-ray powder diffraction and transmission electron microscopy, respectively. The $NO_2$ sensing response of the $Au@TiO_2/rGO$ NC was tested at operating temperatures from $250^{\circ}C$ to $500^{\circ}C$, and was compared with those of the bare rGO and $Au@TiO_2$ core-shell NPs. The $Au@TiO_2/rGO$ NC-based sensor showed a far higher response than the rGO or $Au@TiO_2$ core-shell based sensors, with the maximum response detected when the operating temperature was $400^{\circ}C$. This improved response was due to the high rGO gas absorption capability for $NO_2$ gas and the catalytic effect of $Au@TiO_2$ core-shell NPs in oxidizing $NO_2$ to $NO_3$.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2607-2610
• /
• 2011

Monodispersed Ag/$TiO_2$ core/shell nanoparticles were synthesized in solution via colloid-seeded deposition process using Ag nanoparticles as colloid seeds and $Ti(SO_4)_2$ as Ti-source respectively. Silver nitrate was reduced to Ag nanoparticles with $N_2H_4{\cdot}H_2O$ in the presence of CTAB as stabilizing agent. The titania sols hydrolyzed by the $Ti(SO_4)_2$ solution deposited on the surface of Ag nanoparticles to form the Ag/$TiO_2$ core/shell nanoparticles. Inductively coupled plasma atomic emission spectrometry (ICP-AES) showed low amount of Ag ion leaching from the Ag/$TiO_2$ core/shell nanoparticles. The Ag/$TiO_2$ core/shell nanoparticles indicated excellent antibacterial effects against Escherichia coli and maintained long-term antibacterial property.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3635-3640
• /
• 2013

We prepared Ni and Pd-modified $TiO_2@SiO_2$ core-shell nanostructures and then analyzed them by scanning electron microscopy, optical microscopy, X-ray diffraction crystallography, FT-IR and UV-Visible absorption spectroscopy. In addition, their CO oxidation performance was tested by temperature-programmed mass spectrometry. The CO oxidation activity showed an order of Ni-$TiO_2@SiO_2$ ($900^{\circ}C$) < Ni-$TiO_2@SiO_2$ ($90^{\circ}C$) < Ni-$TiO_2@SiO_2$ ($450^{\circ}C$) in the first CO oxidation run, and greatly improved activity in the same order in the second run. The $T_{10%}$ (the temperature at 10% CO conversion) corresponds to the CO oxidation rate of $2.8{\times}10^{-5}$ molCO $g{_{cat}}^{-1}s^{-1}$. For Ni-$TiO_2@SiO_2$ ($450^{\circ}C$), the $T_{10%}$ was observed at $365^{\circ}C$ in the first run and at $335^{\circ}C$ in the second run. For the Pd-$TiO_2@SiO_2$ ($450^{\circ}C$), the $T_{10%}$ was observed at a much lower temperature of $263^{\circ}C$ in the first CO oxidation run, and at $247^{\circ}C$ in the second run. The CO oxidation activities of transition metal modified $TiO_2@SiO_2$ core-shell nanostructures presented herein provide new insights that will be useful in developing catalysts for various environments.