• Journal of Powder Materials
• /
• 제26권3호
• /
• pp.237-242
• /
• 2019

In this study, ultrasonic spray pyrolysis combined with salt-assisted decomposition, a process that adds sodium nitrate ($NaNO_3$) into a titanium precursor solution, is used to synthesize nanosized titanium dioxide ($TiO_2$) particles. The added $NaNO_3$ prevents the agglomeration of the primary nanoparticles in the pyrolysis process. The nanoparticles are obtained after a washing process, removing $NaNO_3$ and NaF from the secondary particles, which consist of the salts and $TiO_2$ nanoparticles. The effects of pyrolysis temperature on the size, crystallographic characteristics, and bandgap energy of the synthesized nanoparticles are systematically investigated. The synthesized $TiO_2$ nanoparticles have a size of approximately 2-10 nm a bandgap energy of 3.1-3.25 eV, depending on the synthetic temperature. These differences in properties affect the photocatalytic activities of the synthesized $TiO_2$ nanoparticles.

• Journal of the Korean Chemical Society
• /
• 제37권4호
• /
• pp.401-407
• /
• 1993

The titanium oxide thin films were prepared by air oxidation and water vapor oxidation. The electrochemical properties of the electrodes were studied in 1M NaOH solution. The peak potentials of oxygen reduction from cyclic voltammogram techniques were observed at aroung -0.9 ∼ -1.0 V vs. SCE and the reaction was totally irreversible process. The electrochemical properties of titanium dioxide electrodes prepared by water vapor oxidation exhibited different from the air oxidized electrodes, but it was similar to single crystal $TiO_2$. The peak potentials of oxygen reduction were observed at slightly more positive than flat band potentials and depended on pH.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2883-2888
• /
• 2013

To enhance the power conversion efficiency of dye-sensitized solar cell (DSSC), the surface of titanium dioxide ($TiO_2$) photoelectrode was modified by hydroxylation treatment with $NH_4OH$ solution at $70^{\circ}C$ for 6 h. The $NH_4OH$ solutions of various concentrations were used to introduce the hydroxyl groups on $TiO_2$ surface. As the concentration of $NH_4OH$ was increased, the short-circuit current density ($J_{SC}$) value and conversion efficiency of solar cells were increased because the amount of adsorbed dye molecules on $TiO_2$ surface was increased. As a result of the surface modification to introduce hydroxyl groups, the concentration of adsorbed dye on the $TiO_2$ surface could be improved up to 32.61% without the changes of morphology, surface area and pore volume of particles. The morphology, the specific surface area, the pore volume and the chemical states of $TiO_2$ surface were characterized by using FE-SEM, $N_2$ adsorption-desorption isotherms and XPS measurements. The amount of adsorbed dye and the performance of fabricated cells were analyzed by using UV-Vis absorption spectroscopy and solar simulator.

• Applied Chemistry for Engineering
• /
• 제20권3호
• /
• pp.241-250
• /
• 2009

During the past few years, titanium salts were investigated as alternative coagulants for the removal of organic matter of different molecular sizes in contaminated water. The flocculation efficiency of Ti-salt was comparable to those of $FeCl_3$ and $Al_2(SO_4)_3$ salts, commonly used coagulants. Incinerated sludge-$TiO_2$ showed higher surface area and photocatalytic activity than commercially available $TiO_2$. Metal-doped forms were produced by adding coagulant aids such as iron (Fe-), aluminium (Al-) and (Ca-) calcium salts during Ti-salt flocculation to increase pH. Ca- and Al- doped $TiO_2$ showed very high photocatalytic activity compared to Fe-doped $TiO_2$. When tested in a pilot scale plant for treatment of dye wastewater to check practical feasibility of the novel process, the removal ratio of the chemical oxygen demand was comparable to those of commonly used coagulants but the settling of sludge was faster. The $TiO_2$ generated after sludge incineration showed a high photocatalytic activity for degradation of volatile organic compounds and increased the rate of hydrogen production by water photosplitting. $TiCl_4$ coagulant and $TiO_2$ produced from different water sources with different concentrations had low acute toxicity compared to heavy metals and commercial $TiO_2$ when examined based on D. Magna mortality. This paper presents the production, characterisation and the photoactivity of $TiO_2$ produced from Ti-salt flocculated sludge. Different case studies are discussed to highlighted recent advances in this field.

• Journal of Industrial Technology
• /
• 제28권A호
• /
• pp.19-22
• /
• 2008

In recent years, much attention has been paid to "Photocatalytic oxidation" as an alternative technique, where the pollutants are degraded by UV-irradiation in the presence of a semiconductor suspension such as titanium dioxide. $TiO_2$ is the most often used photocatalyst due to its considerable photocatalytic activity, high stability, non-environmental impact and low cost. 1n this research, the photocatalytic degradation of humic acid, acetaldehyde and methylene blue in $UV/TiO_2$ systems has been stydied. The effect of calcination temperature for manufacturing of $TiO_2$ photocatalysts and type of photocatalysts on photodegradation has been investigated. Photocatalysts with various metal ions(Mn, Fe, Cu and Pt) loading are tested to evaluate the effects of metal ions impurities on photodegradation. The photodegradation efficiency with $Pt-TiO_2$ or $Fe-TiO_2$ or $Cu-TiO_2$ is higher than Degussa P-25 powder. However, the photodegradation efficiency with $Mn-TiO_2$ is lower than Degussa P-25 powder. The photocatalytic properties of the nanocrystals were strongly dependent upon the crystallinity, particle size, standard reduction potential of various transition metal and electronegativity of various transition metal. As a result photocatalysts with various metal ion loading evaluated the effect of photodegradation.

• Journal of the Korean Ceramic Society
• /
• 제46권1호
• /
• pp.1-9
• /
• 2009

Activated carbon modified with nickel (Ni-AC) was employed the for preparation of Ni-activated carbon/$TiO_2$ (Ni-AC/$TiO_2$) composites. The $N_2$ adsorption data showed that the composites had a decreased surface area compared with pristine AC. This indicated blocking of the micropores on the surface of the AC, which was further supported by observation via SEM. XRD results showed that the Ni-AC/$TiO_2$ composite contained a mixed anatase and rutile phase while the untreated AC/$TiO_2$ contained only a typical single and clear anatase phase. EDX results showed the presence of C, O, and Ti with Ni peaks on the composites of Ni-AC/$TiO_2$. Subsequently, the photocatalytic effects on methylene blue (MB) were investigated. The improved decomposition of MB showed the combined effects of adsorptions and photo degradation. In particular, composites treated with Ni enhanced the photo degradation behaviors of MB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.280-281
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a Titanium dioxide ($TiO_2$) thin film by rf magnetron sputtering system for 15min under various rf power. A very low pretilt angle by ion beam exposure on the $TiO_2$ thin film was measured. A good LC alignment by the ion beam alignment method on the $TiO_2$ thin film surface was observed at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $250^{\circ}C$. Consequently, the low NLC pretilt angle and the good thermal stability of LC alignment by the ion beam alignment method on the $TiO_2$ thin film by sputter method as various rf power condition can be achieved.

• Textile Coloration and Finishing
• /
• 제26권3호
• /
• pp.195-200
• /
• 2014

Poly(vinyl alcohol)(PVA)/pullulan/titanium dioxide($TiO_2$) composite nanofibers were produced at different $TiO_2$ concentrations(1 and 3 wt.%) using the electrospinning method. The parameters of electrospinning including polymer contents, voltage and tip-to-collector distance(TCD) were optimized for fabrication process. The study showed that the best condition to make PVA/pullulan nanofiber and effect of $TiO_2$ nanoparticles. The PVA/pullulan/$TiO_2$ nanofibers were characterized by scanning electron microscope(SEM), transmission electron microscope(TEM), Thermogravimetric analysis (TGA) and X-ray diffraction(XRD).

• YAKHAK HOEJI
• /
• 제52권5호
• /
• pp.407-411
• /
• 2008

Phosphorylation plays the most important role in cell signaling mechanism. Various methods to identify the phosphorylation sites of proteins using tandem mass spectrometry (MS/MS) have been reported recently. Furthermore, the enrichment strategy such as Titanium dioxide ($TiO_2$) method should be combined with MS/MS analysis to effectively identify phosphorylation sites. It is necessary to optimize phosphopeptide-enrichment strategy, $TiO_2$ method in this study, due to the low amount of phosphorylated form followed by analyzing them by MS/MS. To evaluate the several conditions to enrich phosphopeptides using $TiO_2$ method, we used ${\apha}$-casein as a standard phosphoprotein and analyzed a representative phosphopeptide (VPQLEIVPNpSAEER) peak of MS spectrum. Batch is better than column method for binding and 300 g/l DHB in loading buffer is better than lower concentration of DHB. 3% TFA and pH 10.5 shows high efficiency of phosphopeptide-enrichment for washing and elution steps, respectively. Finally we identified various efficient conditions of phosphopeptide-enrichment method using $TiO_2$. This optimized method would assist in reliable identifying thousands of phosphorylation sites existed in low abundance from various complex proteins.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.117-118
• /
• 2007

In this paper, we examined an effect by the binder in titanium dioxide film for dye sensitized solar cell. Binder(PEG and PEO) was added the quantity of 10- 40wt% to commercial $TiO_2$ (P25), Respectively. All of $TiO_2$ film was showed porous structure. but difference of film's porosity could not be confirm. Transmittances of $TiO_2$ film was decreased with the increase of binder's quantity, generally. In case of 20wt%, however, Transmittances of $TiO_2$ film was recoded the highest value. and it measured 1.77 of energy-conversion efficiency.