• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.750-756
• /
• 1996

$TiO_2$ was dispersed in zeolite and glass filter by soaking them in isopropanol solution of titanium tetraisopropoxide and drying in the air, followed by calcination at $500^{\circ}C$. The analysis of chlorothalnoil was carried out by gas chromatograph with an electron capture detector. Chlorothalnoil was degraded photocatalytically over the matrix-supported $TiO_2$ efficiently and could be completely photodegraded after 3hrs. Production were 5.0ppm of $Cl^-$ for $TiO_2$ supported zeolite, 7.5ppm of $Cl^-$ for $TiO_2$ supported glass filter and 2.0ppm of $Cl^-$ for $TiO_2$ powder. But, $CN^-$ was lower than the detection limit irrespective of matrices.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1505-1506
• /
• 2011

염료감응형 태양전지(Dye-Sensitized Solar Cell, DSSC)의 FTO 표면에 compact layer를 형성시켜 직접적인 마찰에 의한 전자의 재결합을 줄일 수 있다. 따라서 광전극에서의 compact layer의 효과를 최대화하기 위하여 $TiCl_4$ 용액에 acetic acid를 첨가하여 특성변화를 측정하였다. UV-Vis 분광기, I-V 특성곡선, EIS 분석장비를 이용하여 검토한 결과, UV-Vis 분광분석을 통해서 acetic acid를 첨가한 compact layer의 투과도가 현저하게 높아진 것을 확인하였다. 이 결과는 $TiCl_4$ 처리에 의하여 compact layer를 구성하고 있는 $TiO_2$ 입자의 응집현상이 개선되므로 표면특성이 향상되었기 때문이다. Acetic acid를 첨가한 compact layer가 입자응집으로 인한 표면저항의 감소를 유발하여, 전자의 이동이 원활해진 것을 내부 임피던스 분석을 통하여 확인하였다. Compact layer에 의해 재결합이 감소하여 효율이 향상된 것을 I-V 특성곡선을 분석하여 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.916-924
• /
• 1990

The preparatin of the fine TiN powders by reduction-nitridation of TiCl3-Al-N2 system was attempted in the temperature range from 350$^{\circ}$to 100$0^{\circ}C$. The formation mechanism and kinetics of TiN were examined, and the resultant TiN powder was characterized by means of XRD, PSA and SEM-EPMA methods. TiN was formed at temperatrue higher than $600^{\circ}C$. As an intermediate phase, AlTi was obtained. The apparent activation energy for the formation of TiN was approximately 4.2kcal/mole(600$^{\circ}$~90$0^{\circ}C$). The crystallite size and lattice constnat of TiN powder obtained in the temperature range from 600$^{\circ}$to 100$0^{\circ}C$ for 2h at the Al/TiCl3 molar ratio of 1.0 were 160~255A and 4.231~4.239A, respectively. According to PSA measurement, the mean particle size ranged from 14.0 to 14.8${\mu}{\textrm}{m}$.

• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.154-159
• /
• 1997

Hydorthemal coating technique has been sucessfully applied to improve oxidation resistance of graphite by forming rutile-TiO2 layer. Hydrothermal treatment of graphite in 0.2M TiCl4 aquous solution at 35℃ resulted in improved water wettability due to the formation of surface-modifying TiO2. The amount of TiO2 increased with temperature. In the presence of surface TiO2 layer, weight loss was reduced by 30%, while the initiation temperature of oxidation was lowered by 30℃.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.158-167
• /
• 2018

In this study, in-situ trans-selective polymerization of isoprene was carried out using titanium-based Ziegler-Natta catalysts. The catalysts were prepared by high-energy ball milling. Individually Large-inner-diameter carbon nanotubes (CNTL), and hydroxylated carbon nanotubes (CNTOH), along with magnesium chloride ($MgCl_2$) were used as the carriers for the catalysts. The optimum ball-milling time for preparing the $CNT/MgCl_2/TiCl_4$ Ziegler-Natta catalysts was 4 h. The $CNTOH/MgCl_2/TiCl_4$ catalyst showed a higher efficiency than that of the $CNTL/MgCl_2/TiCl_4$ catalyst, based on the rate of polymerization. The effects of the CNT-filler type on the isoprene polymerization behaviors and polymer properties were investigated. The morphologies of the trans-1,4-polyisoprene (TPI)/CNT and TPI/CNTOH nanocomposites exhibited a tube-like shape, and the CNTL and CNTOH fillers were well dispersed in the TPI matrix. In addition, the thermal stability of TPI significantly increased upon the introduction of a small amount of both CNTL/CNTOH fillers (0.15 wt%), owing to the satisfactory dispersion of the CNTL/CNTOH in the TPI matrix.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.1
• /
• pp.92-101
• /
• 2005

[ $Li_3AlH_6$ ] (5.6wt% theoretical hydrogen storage capacity) powders with and without Ti-containing dopants have been successfully synthesized by mechanochemical reaction near room temperatures from mixtures of LiH and $LiAlH_4$ powders. It has been observed that single phase $Li_3AlH_6$ could be obtained within 2-3 hours of milling, but the addition of reactive $TiCl_2\;or\;TiCl_3$ to the starting mixtures. caused partial decomposition of $LiAlH_4$ into LiCl and free Al with gaseous $H_2$. By addition of these reactive dopants to the as-synthesized $Li_3AlH_6$, this problem could be solved. The addition of 2 mol% $TiCl_2\;or\;TiCl_3\;to\;Li_3AlH_6$ decreased the decomposition start temperature up to 30-50$^{\circ}C$, while that of Ti or $TiH_2$ did not change the thermal decomposition behavior of $Li_3AIH_6$.

• Korean Journal of Optics and Photonics
• /
• v.5 no.4
• /
• pp.499-504
• /
• 1994

Ti-doped BSG (borosilicate glass) soot films on the silicone substrate have been deposited in the mixture of $SiCl_{4}$, TMB, $TiCL_{4}$ by flame hydrolysis deposition technique. The soot films are melted to form integrated fine glass films. We can fabricate thick films of serveral $10{\mu}m$ with deposition rate,more than $0.5{\mu}m$/min. Refractive index difference of BSG films are increased to more than 0.3% as function of the amount of Ti dopant. As a result of the process an optical waveguide which is simmilar with dimmension and refractive difference of optical fiber is produced. $BCl_{3}$ is widely used for B dopant, but we abtained the good results by the use of TMB in place of $BCl_{3}$. The melting point of silica soot glass is reduced to $1200^{\circ}C$ increasing B dopant. From FTIR analysis $B_2O_3$ content up to about lOmol% in BSG films. films.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1097-1103
• /
• 2001

TiO$_2$anchored on a porous clay ceramic support (PCS) for use in lightweight photocatalyst were synthesized by the dropping precipitant method. A PCS of macro and micro pore size of around several mm~${\mu}{\textrm}{m}$ in diameter were prepared by the rapid heat treatment at, 1,15$0^{\circ}C$ for 10 min from low grade of clay. The change in pH of reaction solution due to the different addition rate of NH$_4$HCO$_3$as a precipitant, the reaction temperature and the concentration of TiCl$_4$had a pronounced effect on the nature of precipitated TiO$_2$particles on the surface of a PCS and the crystal structure of precipitated TiO$_2$particles. At an addition rate of 0.8 ml/min of NH$_4$HCO$_3$and pH=6 of reaction solution, homogeneous precipitation of TiO$_2$particles on a PCS was achieved. TiO$_2$particles with anatase phase was precipitated on the surface of a PCS at the low concentration of TiCl$_4$, the high addition rate of NH$_4$HCO$_3$and the high reaction temperature.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.61-66
• /
• 2006

Titanium alloys have been used for dental materials due to it's very good biocompatibility. Ti-6Al-4V alloy instead of pure titanium is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. The Ti-Nb alloys has designed and examined corrosion resistance. Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb(${\alpha}+{\beta}$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The corrosion resistance of Ti alloys was evaluated by potentiodynamic polarization test in the solution of 0.9% NaCl and 5% HCl. The results can be summarized as follows: 1) For the corrosion test in the solution of 0.9% NaCl and 5% HCl, the corrosion behaviour of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 2) The corrosion resistance of Ti-20Nb alloy was better than that of CP-Ti, Ti-3Nb, Ti-40Nb alloy in 0.9% NaCl and 5% HCl, solutions.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.25-31
• /
• 2008

Cp-Ti and Ti-6Al-4V alloys commonly used dental implant materials, particularly for orthopaedic and osteosynthesis because of its suitable mechanical properties and excellent biocompatibility. This alloys have excellent corrosion behavior in the clinical environment. The first factor to decide the success of dental implantation is sufficient osseointegration and high corrosion resistance between on implant fixture and its surrounding bone tissue. In this study, in order to increase corrosion resistance and biocompatibility of Cp-Ti and Ti-6Al-4V alloy that surface of manufactured alloy was coated with TiN by RF-magnetron sputtering method. The electrochemical behavior of TiN coated Cp-Ti and Ti-6Al-4V alloy were investigated using potentiodynamic (EG&G Co, PARSTAT 2273. USA) and potentiostatic test (250mV) in 0.9% NaCl solution at 36.5 $\pm$ 1$^{\circ}C$. These results are as follows : 1. From the microstructure analysis, Cp-Ti showed the acicular structure of $\alpha$-phase and Ti-6Al-4V showed the micro-acicular structure of ${\alpha}+{\beta}$ phase. 2. From the potentiodynamic test, Ecorr value of Cp-Ti and Ti-6Al-4V alloys showed -702.48mV and -319.87mV, respectively. Ti-6Al-4V alloy value was higher than Cp-Ti alloy. 3. From the analysis of TiN and coated layer, TIN coated surface showed columnar structure with 800 nm thickness. 4. The corrosion resistance of TiN coated Cp-Ti and Ti-6Al-4V alloys were higher than those of the non-coated Ti alloys in 0.9% NaCl solution from potentiodynamic test, indicating better protective effect. 5. The passivation current density of TiN coated Cp-Ti and Ti-6Al-4V alloys were smaller than that of the noncoated implant fixture in 0.9% NaCl solution, indicating the good protective effect resulting from more compact and homogeneous layer formation.