• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.94-98
• /
• 2000

Polycrystalline SBTN ferroelectric thin films were prepared by sol-gel method with various Nb mole ratios on Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperatures and characterized in terms of phase and microstructure. Relatively a well saturated hysteresis pattern was obtained at x =0.2 in S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin films. At an applied voltage of 5V, the dielectric constant ($\varepsilon$$_{r}$) and dissipation factor (tan $\delta$) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin film (x=0.2) were about 236.2 and 0.034. Measured remanent polarization (2Pr) and coercive field (Ec) were 4.28C/c $m_2$, and 38.88kv/cm respectively. No fatigue was observed up to 6$\times$10$_{10}$ switching cycles at 5V and the normalized polarization reduced by a factor of only 4%.%. 4%.%. 4%.%.%.%.%.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.315-320
• /
• 2000

We have investigated the crystal structure and electrical properties of Pt/SBT/$ZrO_2$/Si (MFIS) and Pt/SBT/Si (MFS) structures for the gate oxide of ferroelectric memory. XRD spectra and SEM showed that the SBT film of SBT/$ZrO_2$/Si structure had larger grain than that of SBT/Si structure. $ZrO_2$ film between SBT film and Si substrate is confirmed as a good candidate for a diffusion barrier by the analysis of AES. The remanent polarization decreased and coercive voltage increased in Pt/SBT/$ZrO_2$/Pt/$SiO_2$/Si structure. This effect may increase memory window of MFIS structure directly related to the coercive voltage. From the capacitance-volt-age characteristics, the memory windows of Pt/SBT (210 nm)/$ZrO_2$ (28 nm)/Si structure were in the range of 1~l.5 V at the applied voltage of 4~6 V. The current densities of Pt/SBT/ZrO$_2$/Si with as -deposited Pt electrode and annealed at $800^{\circ}C$ in $O_2$ambient were $8\times10^{-8} A/\textrm{cm}^2$ and $4\times10^{-8}A/\textrm{cm}^2$ , respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.1-6
• /
• 2000

Recently, SrBi$_{2}$Ta$_{2}$ $O_{9}$(SBT) and Pb(Zr,Ti) $O_{3}$(PZT) were much attracted as materials of capacitor for ferroelectric random access memory(FRAM) with higher read/ write speed, lower power consumption and nonvolartility. SBT thin film has appeared as the most prominent fatigue free and low operation voltage. To highly integrate FRAM, SBT thin film has to be etched. A lot of papers have been reported over growth of SBT thin film and its characteristics. However, there are few reports about etching SBT thin film owing to difficult of etching ferroelectric materials. SBT thin film was etched in CF$_{4}$Ar plasma using magnetically enhanced inductively coupled plasma (MEICP) system. In order to investigate the chemical reaction on the etched surface of SBT thin films, X-ray Photoelecton spectrosocpy (XPS) and Secondary ion mass spectroscopy(SIMS) was performed.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.20-23
• /
• 1999

본 연구에서는 $SrBi_xTa_2O_9$ 세라믹스에서 Bi 몰비 변화에 대한 x를 2.4, 2.6, 2.8, 3.0, 3.2로 변화시키면서 소결 온도도 변화하여 각각에 대한 구조 및 전기적 특성을 조사하였다. Bi 부족과 이상과잉에 따라 이상의 결정구조를 보였으며 소결온도가 높아질수록 Bi 휘발이 많아져 정방성이 떨어졌다. Sr/Bi/Ta=1/2.8/2 조성에서 가장 큰 정방성과 그레인 크기를 나타내었으며 그 조성에서 1000[$^{\circ}C$]로 소결한 시료에서 유전율 132를 보였고 1050[$^{\circ}C$]로 소결한 시료에서 잔류분극 1.134[${\mu}C/cm^2$]을 나타내었다.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.263-268
• /
• 1997

RuO$_3$ thin films were deposited on Si(100) substrate at low temperatures by hot-wall metalorganic chemical vapor deposition. Bis(cyclopentadienyl) ruthenium, Ru$(C_5H_5)_2$, was used as the precursor RuO$_2$single phase was obtained at a low deposition temperature of 25$0^{\circ}C$ and the crystallinity of RuO$_2$thin films improved with increasing deposition temperature. RuO$_2$thin films grow perpendicularly to the substrate and show the columnar structure. The grain size of RuO$_2$films drastically increases with increasing the deposition temperature. The resistivity of the 180 nm-thick RuO$_2$thin films deposited at 27$0^{\circ}C$ was 136 $\mu$$\Omega$-cm and increased with decreasing film thickness. SrBi$_2Ta_2O_4$ thin films deposited by rf magnetron sputtering on the RuO$_2$bottom electrodes showed a fatigue-free characteristics up to ~10$^10$ cycles under 5 V bipolar square pulses and the remanent polarization, 2 P$_r$ and the coercive field, 2 E, were 5.2$\mu$C/$\textrm{cm}^2$ and 76.0 kV/cm, respectively, for an applied voltage of 5 V The leakage current density was about 7.0$\times$10$^{-6}$ A/$\textrm{cm}^2$ at 150 kV/cm.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.128-132
• /
• 2004

The perovskite ferroelectric materials of the PZT, SBT and BST series will attract much attention for application to ULSI devices. Among these materials, the BST ($Ba_0.6$$Sr_0.4$/$TiO_3$) is widely considered the most promising for use as an insulator in the capacitors of DRAMS beyond 1 Gbit and high density FRAMS. Especially, BST thin films have a good thermal-chemical stability, insulating effect and variety of Phases. However, BST thin films have problems of the aging effect and mismatch between the BST thin film and electrode. Also, due to the high defect density and surface roughness at grain boundarys and in the grains, which degrades the device performances. In order to overcome these weakness, we first applied the chemical mechanical polishing (CMP) process to the polishing of ferroelectric film in order to obtain a good planarity of electrode/ferroelectric film interface. BST ferroelectric film was fabricated by the sol-gel method. And then, we compared the surface characteristics before and after CMP process of BST films. We expect that our results will be useful promise of global planarization for FRAM application in the near future.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.19-33
• /
• 1997

This study reports the results about the petrography and geochemical characteristics of 10 representative volacanic rocks. The Cretaceous volcanic rocks distributed in the vicinity of the Kageo island composed of andesitic rocks, dacitic welded tuff, and rhyolitic rocks in ascending order. Sedimentary rock is the basement in the study area covered with volcanic rocks. Andesitic rocks composed of pyroclastic volcanic breccia, lithic lapilli tuff and cryptocrystallin lava-flow. Most dacitic rocks are lapilli ash-flow welded tuff. Rhyolitic rocks consists of rhyolite tuff and rhyolite lava flow. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic rocks, but dacitic rocks. The variation of major and trace element of the volcanic rocks show that contents of $Al_2O_3$, FeO, CaO, MgO, $TiO_2$ decrease with increasing of $SiO_2$. On the basis of Variation diagrams such as $Al_2O_3$ vs. CaO, Th/Yb vs. Ta/Yb, and $Ce_N/YB_N$ vs. $Ce_N$, these rocks represent mainly differentiation trend of calc-alkaline rock series. On the discriminant diagrams such as Ba/La and La/Th ratio, Rb vs. Y + Nb, the volcanic rocks in study area belongs to high-K Orogenic suites, with abundances of trace element and ternary diagram of K, Na, Ca. According to the tectonic discriminant diagram by Wood, these rocks falls into the diestructructive continental margin. K-Ar ages of whole rocks are from andesite to rhyolite $97.0{\pm}6.8~94.5{\pm}6.6,\68.9{\pm}4.8,\61.5{\pm}4.9~60.7{\pm}4.2$ Ma, repectively. Volcanic rocks in study area show well correlation to the Yucheon Group in terms of rock age dating and geochemcial data, and derived from andesitic calc-alkaline magma that undergone low pressure fractional crystallization dominated plagioclase at <30km.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.299-314
• /
• 2008

The NE-trending Honam shear zone is a broad, dextral strike-slip fault zone between the southern margin of the Okcheon Belt and the Precambrian Yeongnam Massif in South Korea and is parallel to the trend of Sinian deformation that is conspicuous in Far East Asia. In this paper, we report geochemical and isotopic(Sr and Nd) data of mylonitic quartz-muscovite Precambrian gneisses and surrounding foliated hornblende-biotite granitoids near the Myeongho area in the Yecheon Shear Zone, a representative segment of the Honam Shear Zone. Foliated hornblende-biotite granitoids commonly plot in the granodiorite field($SiO_2=61.9-67.1\;wt%$ and $Na_2O+K_2O=5.21-6.99\;wt%$) on $SiO_2$ vs. $Na_2O+K_2O$ discrimination diagram, whereas quartz-muscovite Precambrian orthogneisses plot in the granite field. The foliated hornblende-biotite granitoids are mostly calcic and calc-alkalic and are dominantly magnesian in a modified alkali-lime index(MALI) and Fe# [$=FeO_{total}(FeO_{total}+MgO)$] versus $SiO_2$ diagrams, which correspond with geochemical characteristics of Cordilleran Mesozoic batholiths. The foliated hornblende-biotite granitoids have molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 0.89 to 1.10 and are metaluminous to weakly peraluminous, indicating I type. In contrast, Paleoproterozoic orthogneisses have peraluminous compositions, with molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 1.11 to 1.22. On trace element spider diagrams normalized to the primitive mantle, the large ion lithophile element(LILE) enrichments(Rb, Ba, Th and U) and negative Ta-Nb-P-Ti anomalies of foliated hornblende-biotite granitoids and mylonitized quartz-muscovite gneisses in the Yecheon Shear Zone are features common to subduction-related granitoids and are also found in granitoids from a crustal source derived from the arc crust of active continental margin. ${\varepsilon}_{Nd}(T)$ and initial Sr-ratio ratios of foliated hornblende-biotite granitoids with suggest the involvement of upper crust-derived melts in granitoid petrogenesis. Foliated hornblende-biotite granitoids in the study area, together with the Yeongju Batholith, show not changing contents of specific elements(Ti, P, Zr, V and Y) from shear zone to the area near the shear zone. These results suggest that no volume changes and geochemical alterations in fluid-rich foliated hornblende-biotite granitoids may occur during deformation, which mass transfer by fluid flow into the shear zone is equal to the mass transfer out of the shear zone.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.120-126
• /
• 1996

In the present study, we have studied on the characteristics of BST thin films with various Ba/Sr ratios by using sol-gel method. Barium-acetate, strontium-acetate and titanium isopropoxide are used as starting materials to fabricate BST thin films by sol-gel method. The fabrication conditions are estabilished through the TG-dT analyses and XRD measurements. BST thin films with the Ba/Sr ratios of 90/10, 70/30, 50/50 and 30/70 were deposited on the Pt/Ta/SiO$_{2}$Si substrate with the estabilished sol-gel process, and their characteristics were examined. The relative permittivity and the leakage current density at 5V vary from 287 to 395 and from 2.3 to 220${\mu}$A/cm$^{2}$, respectively, with various Ba/Sr ratio. Among the films investigatd in this research, BST (70/30) thin film shows the best relative permittivity and dielectric loss of BST (70/30) thin film are 395 and 0.045, respectively and the leakage current density at 5V is 2.3${\mu}$A/cm$^{2}$.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.72-76
• /
• 2004

The $Sr_{0.7}Bi_{2.6}Ta_2O_9$(SBT)thin films are deposited on pt-coated electrode(Pt/$TiO_2/SiO_2/Si$) using a RF magnetron sputtering method. The electrical properties of SBT capacitors with annealing conditions were studied. In the XRD pattern, the SBT thin films in all annealing temperatures had (105) orientation. In the SEM images, Bi-layered perovskite phase was crystallized at $750^{\circ}C$,/TEX> and grains largely grew in oxygen annealing atmosphere. The maximum renanent polarization and the coercive electric field with annealing conditions are 12.40C/$cm^2$ and 30kV/cm, respectively. The dielectric constant and leakage current density with Pt electrode is 340 and 2.13${\times}10^{-10}A/cm^2$, respectively.