• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.176-177
• /
• 2013

Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.216-220
• /
• 2011

PURPOSE. Heat of composite polymerization (HP) indicates setting efficacy and temperature increase of composite in clinical procedures. The purpose of this in vitro experimental study was to evaluate the effects of 5 temperatures on HP of two new composites. MATERIALS AND METHODS. From each material (Core Max II [CM] and King Dental [KD]), 5 groups of 5 specimens each were prepared and their total HPs (J/gr) were measured and recorded, at one of the constant temperatures $0^{\circ}C$, $15^{\circ}C$, $23^{\circ}C$, $37^{\circ}C$ and $60^{\circ}C$ ($2{\times}5{\times}5$ specimens) using a differential scanning calorimetry (DSC) analyzer. The data were analyzed using a two-way ANOVA, a Tukey's test, an independent-samples ttest, and a linear regression analysis (${\alpha}=0.05$). RESULTS. No polymerization reactions occurred at $0^{\circ}C$; then this temperature was excluded from statistical analyses. The mean HP of the remaining 20 KD specimens was $20.5{\pm}14.9$ J/gr, while it was $40.7{\pm}12.9$ J/gr for CM. The independent-samples t-test showed that there were significant differences between the HP of the two materials at the temperatures $15^{\circ}C$ (P=.0001), $23^{\circ}C$ (P=.0163), $37^{\circ}C$ (P=.0039), and $60^{\circ}C$ (P=.0106). Linear regression analysis showed statistically significant correlations between environment temperatures and HP of CM ($R^2=0.777$). CONCLUSION. Using CM is advantageous over conventional composite because of its better polymerization capacity. However due to its high HP, further studies should assess its temperature increase in vivo. Preheating KD is recommended. Refrigerating composites can negatively affect their polymerization potential.

• KSBB Journal
• /
• v.18 no.4
• /
• pp.266-271
• /
• 2003

This study was worked out to investigate the compounds of antioxidant constituents extracted from Stachys Sieboldii MiQ. and their effects on antioxidant activity by DPPH method, ferric thiocyanate method, and nitrite scavenging ability. Solvents such as methanol, hexane, chloroform, ethyl acetate, butanol, and water were used for this purpose. Total concentrations of polyphenols and flavonoids were measured in the methanol fraction. The ethyl acetate fraction showed the strongest activity by DPPH method, ferric thiocyanate method, and nitrite scavenging ability. The ethyl acetate extract was fractionated on a silica gel column using elution solvent (chloroform: methanol: water ＝ 70 : 30 : 5 lower phase) at a flow rate of 1.0 mL/min. UV-VIS spectral data of each fraction showed adsorption maxima in the range of 284～330 nm. Among fractions, the fraction 1 that has λ$\_$max/ (nm) of 284 nm showed the strongest activity by DPPH method. The UV-VIS spectral data of phenolic compounds were known to lie in the range of 210～290 nm and 300～550 nm. Therefore, the results of our study suggested that Stachys sieboldii MIQ. contains phenolic compounds showing natural antioxidant activity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.153-157
• /
• 2016

Background: In radiation therapy, estimation of surface doses is clinically important. This study aimed to obtain an analytical relationship to determine the skin surface dose, kerma and the depth of maximum dose, with energies of 6 and 18 megavoltage (MV). Materials and Methods: To obtain the dose on the surface of skin, using the relationship between dose and kerma and solving differential equations governing the two quantities, a general relationship of dose changes relative to the depth was obtained. By dosimetry all the standard square fields of $5cm{\times}5cm$ to $40cm{\times}40cm$, an equation similar to response to differential equations of the dose and kerma were fitted on the measurements for any field size and energy. Applying two conditions: a) equality of the area under dose distribution and kerma changes in versus depth in 6 and 18 MV, b) equality of the kerma and dose at $x=d_{max}$ and using these results, coefficients of the obtained analytical relationship were determined. By putting the depth of zero in the relation, amount of PDD and kerma on the surface of the skin, could be obtained. Results: Using the MATLAB software, an exponential binomial function with R-Square >0.9953 was determined for any field size and depth in two energy modes 6 and 18MV, the surface PDD and kerma was obtained and both of them increase due to the increase of the field, but they reduce due to increased energy and from the obtained relation, depth of maximum dose can be determined. Conclusions: Using this analytical formula, one can find the skin surface dose, kerma and thickness of the buildup region.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.154-161
• /
• 2013

This study was conducted to investigate the physiological responses of Bupleurum latissimum, endangered plants by light condition. We investigated photosynthetic parameters, chlorophyll contents and chlorophyll fluorescence under different shading treatments (Shaded 50%, 70%, 90% and non-treated). Results showed that net apparent quantum yield (AQY) and chlorophyll contents were significantly increased with elevating shading level. However, light compensation point (LCP) and dark respiration ($R_d$) were shown the opposite trend. Especially, non-treated exhibited photoinhibition such as reduction of chlorophyll contents and maximum photosynthesis rate ($Pn_{max}$) also variation trend of stomatal conductance ($g_s$), and transpiration rate (E) were decreased to prevent water loss. Photosynthetic rate ($P_{Nmax}$) and photochemical efficiency (Fv/Fm) of 90% treatment showed a drastic reduction in July. This implies that photosynthetic activity will be sharply decreased with a long period of low light intensity. The 50% treatment showed relatively higher photosynthetic activity than other treated. This result suggested that growth and physiology of B. latissimum adapted to 50% of full sunlight.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.1
• /
• pp.126-133
• /
• 2016

A gene from Actinomyces sp. Korean native goat (KNG) 40 that encodes an endo-${\beta}$-1,4-glucanase, EG1, was cloned and expressed in Escherichia coli (E. coli) $DH5{\alpha}$. Recombinant plasmid DNA from a positive clone with a 3.2 kb insert hydrolyzing carboxyl methyl-cellulose (CMC) was designated as pDS3. The entire nucleotide sequence was determined, and an open-reading frame (ORF) was deduced. The ORF encodes a polypeptide of 684 amino acids. The recombinant EG1 produced in E. coli $DH5{\alpha}$ harboring pDS3 was purified in one step using affinity chromatography on crystalline cellulose and characterized. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis/zymogram analysis of the purified enzyme revealed two protein bands of 57.1 and 54.1 kDa. The amino terminal sequences of these two bands matched those of the deduced ones, starting from residue 166 and 208, respectively. Putative signal sequences, a Shine.Dalgarno-type ribosomal binding site, and promoter sequences related to the consensus sequences were deduced. EG1 has a typical tripartite structure of cellulase, a catalytic domain, a serine-rich linker region, and a cellulose-binding domain. The optimal temperature for the activity of the purified enzyme was $55^{\circ}C$, but it retained over 90% of maximum activity in a broad temperature range ($40^{\circ}C$ to $60^{\circ}C$). The optimal pH for the enzyme activity was 6.0. Kinetic parameters, $K_m$ and $V_{max}$ of rEG1 were 0.39% CMC and 143 U/mg, respectively.

• Microbiology and Biotechnology Letters
• /
• v.16 no.6
• /
• pp.468-475
• /
• 1988

The cloned B. subtilis cdd gene encoding cytidine/2'deoxycytidine deaminase (EC 3.5.4.5) was expressed in the cdd deficient B. subtilis mutant ED40. The gene was isolted from the cdd complementing plasmid pSO21, and inserted into the EcoR1/Pvu1 sites of pGB215-110 ΔB, which is a temperature sensitivie E. coli-B. subtilis shuttle vector. In the transformed B. subtilis ED4O harboring the resulting plasmid pSO100, cdd was expressed at several hundred fold elevated levels, and the cytidine deaminase activity in E. coli containing pSO100 was twice the level in B. subtilis/pSO0100. The Km value for cytidine of the partially purified enzyme is 1.88$\times$10$^{-4}$M at pH 7.0 and the V$_{max}$ = 11.1 $\mu$mol/min/mg of protein. The enzyme was completely inhibited by 0.1M mercaptoethanol and HgCl$_2$. The inhibition by p-chrolomercurybenzoic acid showed a Ki = 5 uM. These results suggest that sulfhydryl reagents block an active site thiol group, and/or disturb the formation of the tetrameic holoenzyme.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.159-165
• /
• 2018

The seed yield of summer plants is affected by climate change due to high temperature. High temperature during the reproductive growth period decrease pod, seed weight in soybean. This study was conducted at National Institute of Crop Science (NICS) during the growing season. The objective of this study was to determine the effect of high temperature on growth and seed yield responses of soybean varieties using a temperature gradient chamber (TGC). In 2017, the Daewonkong (DWK), Pungsannamulkong (PSNK), and Deapungkong (DPK) were grown in three TGCs. Four temperature treatments, Ta (near ambient temperature), Ta+1 (ambient temperature+$1^{\circ}C$), $Ta+2^{\circ}C$ (ambient temperature+$2^{\circ}C$), $Ta+3^{\circ}C$ (ambient temperature+$3^{\circ}C$), $Ta+4^{\circ}C$ (ambient temperature+$4^{\circ}C$), were established by dividing the rows along which the temperature gradient was created. In all three cultivars, beginning bloom (R1) delayed at elevated temperature in $Ta+4^{\circ}C$. In addition, the days to beginning of seed fill and maturity were longer under higher temperature. The numbers of pod, 100 seed weight, and seed yield increased at elevated temperature in DWK. In contrast, seed yield components of PSNK and DPK were reduced in $Ta+4^{\circ}C$. The results suggest that 100 seed weight and seed size of soybean was low by increased temperature in $Ta+4^{\circ}C$ of PSNK and DPK.

• Journal of Plant Biotechnology
• /
• v.39 no.3
• /
• pp.121-126
• /
• 2012

To determine whether FT-IR spectroscopy combined with multivariate analysis for whole cell extracts can be used to discriminate major leguminous plant at metabolic level, seed extracts of six leguminous plants were subjected to Fourier transform infrared spectroscopy (FT-IR). FT-IR spectral data from seed extracts were analyzed by principal component analysis (PCA), partial least square discriminant analysis (PLS-DA) and hierarchical clustering analysis (HCA). The PCA could not fully discriminate six leguminous plants, however PLS-DA could successfully discriminate six leguminous plants. The hierarchical dendrogram based on PLS-DA separated the six leguminous plants into four branches. The first branch was consisted of all three Vigna species including Vigna radiata var. radiate, Vigna angularis var. angularis and Vigna unguiculata subsp. Unguiculata. Whereas Pisum sativum var. sativum, Glycine max L and Phaseolus vulgaris var. vulgaris were clustered into a separate branch respectively. The overall results showed that metabolic discrimination system were in accordance with known phylogenic taxonomy. Thus we suggested that the hierarchical dendrogram based on PLS-DA of FT-IR spectral data from seed extracts represented the most probable chemotaxonomical relationship between six leguminous plants.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.893-902
• /
• 2011

Endophytic fungi are little known for their role in gibberellins (GAs) synthesis and abiotic stress resistance in crop plants. We isolated 10 endophytes from the roots of field-grown soybean and screened their culture filtrates (CF) on the GAs biosynthesis mutant rice line - Waito-C. CF bioassay showed that endophyte GMH-1B significantly promoted the growth of Waito-C compared with controls. GMH-1B was identified as Penicillium minioluteum LHL09 on the basis of ITS regions rDNA sequence homology and phylogenetic analyses. GC/MS-SIM analysis of CF of P. minioluteum revealed the presence of bioactive $GA_4$ and $GA_7$. In endophyte-soybean plant interaction, P. minioluteum association significantly promoted growth characteristics (shoot length, shoot fresh and dry biomasses, chlorophyll content, and leaf area) and nitrogen assimilation, with and without sodium chloride (NaCl)-induced salinity (70 and 140 mM) stress, as compared with control. Field-emission scanning electron microcopy showed active colonization of endophyte with host plants before and after stress treatments. In response to salinity stress, low endogenous abscisic acid and high salicylic acid accumulation in endophyte-associated plants elucidated the stress mitigation by P. minioluteum. The endophytic fungal symbiosis of P. minioluteum also increased the daidzein and genistein contents in the soybean as compared with control plants, under salt stress. Thus, P. minioluteum ameliorated the adverse effects of abiotic salinity stress and rescued soybean plant growth by influencing biosynthesis of the plant's hormones and flavonoids.