• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.72-77
• /
• 2009

In this paper, a 3.2Gb/s clock and data recovery (CDR) circuit for a high-speed serial data communication without the reference clock is described This CDR circuit consists of 5 parts as Phase and frequency detector(PD and FD), multi-phase Voltage Controlled-Oscillator(VCO), Charge-pumps (CP) and external Loop-Filter(KF). It is adapted the PD and FD, which incorporates a half-rate bang-bang type oversampling PD and a half-rate FD that can improve pull-in range. The VCO consists of four fully differential delay cells with rail-to-rail current bias scheme that can increase the tuning range and tuning linearity. Each delay cell has output buffers as a full-swing generator and a duty-cycle mismatch compensation. This materialized CDR can achieve wide pull-in range without an extra reference clock and it can be also reduced chip area and power consumption effectively because there is no additional Phase Locked- Loop(PLL) for generating reference clock. The CDR circuit was designed for fabrication using 0.18um 1P6M CMOS process and total chip area excepted LF is $1{\times}1mm^2$. The pk-pk jitter of recovered clock is 26ps at 3.2Gb/s input data rate and total power consumes 63mW from 1.8V supply voltage according to simulation results. According to test result, the pk-pk jitter of recovered clock is 55ps at the same input data-rate and the reliable range of input data-rate is about from 2.4Gb/s to 3.4Gb/s.

• BMB Reports
• /
• v.51 no.11
• /
• pp.590-595
• /
• 2018

Parkinson's disease (PD) is a common chronic neurodegenerative disease mainly caused by the death of dopaminergic neurons. However, no complete pharmacotherapeutic approaches are currently available for PD therapies. 1-methyl-4-phenylpyridinium $(MPP^+)$-induced SH-SY5Y neurotoxicity has been broadly utilized to create cellular models and study the mechanisms and critical aspects of PD. In the present study, we examined the role of a novel azetidine derivative, 3-(naphthalen-2-yl(propoxy)methyl)azetidine hydrochloride (KHG26792), against $MPP^+$-induced neurotoxicity in SH-SY5Y cells. Treatment of KHG26792 significantly attenuated $MPP^+$-induced changes in the protein levels of Bcl-2 and Bax together with efficient suppression of $MPP^+$-induced activation of caspase-3 activity. KHG26792 also attenuated mitochondrial potential and levels of ROS, $Ca^{2+}$, and ATP in $MPP^+$-treated SH-SY5Y cells. Additionally, KHG26792 inhibited the induced production of nitric oxide and malondialdehyde. Moreover, the protective effect of KHG26792 is mediated through regulation of glutathione peroxidase and GDNF levels. Our results suggest a possibility that KHG26792 treatment significantly protects against $MPP^+$-induced neurotoxicity in SH-SY5Y cells and KHG26792 may be a valuable therapeutic agent for the treatment of PD induced by an environmental toxin.

• Clean Technology
• /
• v.21 no.3
• /
• pp.184-190
• /
• 2015

Most of LNT catalysts use noble metals such as Pt for low temperature NO_x oxidation but there is an economic weakness. For the purpose of overcoming this, this study is to develop DeNO_x catalyst for LNT excluding PGM (platinum group metal) such as Pt, Pd, Rh, etc. To do so, Al/Co/Ni catalyst selected as a preliminary test is used to study fundamental property and NO_x’s conversion according to calcined temperature. Ultimately, that is, Al/Co/Ni mixed metal oxide which does not use PGM is selected and physicochemical characterization is performed by way of XRD, EDS, SEM, BET and ramp test and NO_x conversion is also analyzed. This study shows that all samples consist of mixed oxides of spinel structure of Co₂AlO₄ and NiAl₂O₄ and have enough pore volume and size for redox. But as a result of NH₃-TPD test, it is desired that calcined temperature needs to be maintained at 700 ℃ or lower. Also only samples which are processed under 500 ℃ satisfied NO and NO_x conversion simultaneously through ramp test. Based on this study’s results, optimum calcined temperature for Al/Co/Ni=1.0/2.5/0.3 mixed metal oxide catalyst is 500 ℃.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.3
• /
• pp.230-240
• /
• 2002

Background : The majority of chemotherapy-treated small cell lung cancers(SCLC) patients eventually recur. Although many patients are in excellent physical condition at the time of recurrence, few drugs or drug combinations are capable of effecting a tumor regression in this setting. Topotecan, a topoisomerase I inhibitor, is one of the more widely studied single afents in SCLC. The aim of this study was to determine the response rate, survival and toxicity of topotecan as a second line traeatment SCLC. Materials and Methods : 19 patients with measurable SCLC, progressive during the first line chemotherapy (9 cases) or recurrent after the first line chemotherpy(10 cases), were enrolled in this study. Topotecan was administered as a 30-minute daily infusion at a dose of 1.5mg/$m^2$ for 5 consecutive days, every 3 weeks. Results : The overall response rate was 26.3%(5/19, CR 2, PR 3, SD 3, PD 11). The median survival was 24 weeks. The response rate and survival were poor in the nonresponders during first chemotherapy, those who were refractory to the first chemotherapy(recurrent within 3 months after completion of first chemotherapy) and extensive disease, but the results were not statistically significant. The toxicities were mainly hematologic and anemia grade III 1/90, leukopenia grade III 6/90 IV 4/90, thrombocytopenia grade III 1/90 IV 1/90, vomiting grade III 1/90 of cycles were occurred. There was no treatment-related deaths due to severe myelosuppression. Conclusion : Topotecan can be an active second line chemotherapeutic agent for treating SCLC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.164-169
• /
• 1997

The present experiment was conducted to evaluate the effects of feed processing and feeding methods on growth performance and carcass characteristics of growing-finishing pigs. A total of 72 pigs (LYD, 22.24 kg BW) were employed for a 90-d feeding trial. Treatments were 1) mash dry feeding (MD), 2) mash wet feeding (MW), 3) pellet dry feeding (PD), and 4) extruded pellet dry feeding (EPD). Corn, soybean meal and wheat bran in the basal diets were extruded before mixing and pelleting for EPD diet production. Ileal or fecal digestibility and carcass traits including lean meat percentage and weights of stomach ulcer were also examined. During the growing period, pigs fed PD showed improved (p < 0.05) average daily gain (ADG) and feed conversion (F/G) over those fed MD, whereas no significant differences in average daily feed intake (ADFI) were found among dietary treatments. Finisher pigs fed MD showed lover, but not significant, ADG and F/G than those fed MW, PD or EPD. For the overall period, pigs fed PD grew faster (p < 0.05) than those fed MD or EPD. Feed intake was different between the two feeding methods (MD vs MW), and between the two processed feeds (PD vs EPD). The digestibility of crude fat was higher (p < 0.05) in pigs fed EPD than in pigs fed mash feeds. NFE digestibility of EPD treatment was also higher (p < 0.05) than that of PD. Back fat (10th rib area) was thicker (p < 0.05) tn pigs fed MD than in pigs fed EPD. other carcass traits including incidence of esophagogastric ulcers were not different among treatments. In conclusion, pelleting appeared to bo the desirable processing methods and wet feeding could also be recommended for growing-finishing pigs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.45-51
• /
• 2001

Catalytic combustion is the environmental-friendly technology, which has been applied to a variety of areas for industrial and domestic use in recent years. Accordingly, this study performed the development of the catalytic manufacturing technology for the high temperature and of the catalytic combustor in priority, which were aimed to be aimed to a commercialized condensing boiler. Palladium(Pd) of a noble meta] was used as a catalyst for the high temperature and supported on $alumina(Al_{2}O_{3})\;and\;zirconia(ZrO_2)$ in constant weight ratio. Activity of Pd catalysts is compared and analysed in the catalytic combustion of natural gas. The ratio of $Pd/Al_{2}O_{3}\;=\;4$ was found to be better than any other weight ratios in activity and durability. The performance examination of catalysts and of combustion through the plate-type combustor made it possible to be developed the cylindrical-type combustor which has increased combustion area. Catalytic combustion condensing boiler of 25,000 kcal/hr class was also developed, which had the optimum combustion condition at the no221e of 5.95mm and the orifice of 21mm. This condition was determined through the performance experiments of catalytic combustion condensing boiler to which the cylindrical-type catalytic combustor was applied.

• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1841-1849
• /
• 2021

Objective: To prospectively investigate the feasibility of shear wave elastography (SWE) as a new quantitative and objective method for evaluating the stiffness of the gastrocnemius medialis (GM) muscle during passive stretching in patients with Parkinson's disease (PD). Materials and Methods: SWE of the GM muscle was performed in 28 patients with PD [13 female and 15 male; mean age ± standard deviation (SD): 63.0 ± 8.5 years] and 12 healthy controls (5 female and 7 male; mean age ± SD: 59.3 ± 6.4 years) during passive ankle rotation. A Young's modulus-ankle angle curve was constructed. The GM slack angle and baseline Young's modulus (E₀) were compared between the markedly symptomatic and mildly symptomatic sides of patients with PD, and healthy controls. Additionally, the correlation between the GM slack angle and the severity of rigidity, and the observer reproducibility of SWE in determining the GM slack angle were evaluated. Results: The GM slack angle was smaller on both the markedly and mildly symptomatic sides in patients with PD than in healthy controls (mean ± SD of -29.13° ± 3.79° and -25.65° ± 3.39°, respectively, vs. -21.22° ± 3.52°; p < 0.001 and p = 0.006, respectively). Additionally, in patients with PD, the GM slack angle on the markedly symptomatic side was smaller than that on the mildly symptomatic side (p = 0.003). The E0 value was lower on both the markedly and mildly symptomatic sides in patients with PD than in healthy controls (mean ± SD of 10.11 ± 2.85 kPa and 10.08 ± 1.88 kPa, respectively, vs. 12.23 ± 1.02 kPa; p = 0.012 and p < 0.001, respectively). However, no significant difference was found between the markedly and mildly symptomatic sides in patients with PD (p = 0.634). A negative linear relationship was observed between the GM slack angle and lower limb rigidity score on the markedly symptomatic side in patients with PD (r = -0.719; p < 0.001). The intraclass correlation coefficients for observer reproducibility of SWE ranged from 0.880 to 0.951. Conclusion: The slack angle determined by SWE may be a useful quantitative and reproducible method for evaluating muscle stiffness in patients with PD.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.407-411
• /
• 2020

In this study, we propose an array-type gas sensor with high selectivity and response using multiple oxide semiconductors. The sensor array was composed of SnO₂ and In₂O₃, and the detection characteristics were improved by using Pt, Au, and Pd catalysts. All samples were deposited directly on the Pt interdigitated electrode (IDE) through the e-beam evaporator glancing angle deposition (GAD) method. They grew in the form of well-aligned nanorods at off-axis angles. The prepared SnO₂ and In₂O₃ nanorod samples were exposed to CH₃COCH₃, C₇H₈, and NO₂ gases in a 300℃ dry condition. Au-decorated SnO₂, Au-decorated In₂O₃, and Pd-decorated In₂O₃ exhibited high selectivity for CH₃COCH₃, C₇H₈, and NO₂, respectively. They demonstrated a high detection limit of the sub ppb level computationally. In addition, measurements from each sensor were executed in the 40% relative humidity condition. Although there was a slight reduction in detection response, high selectivity and distinguishable detection characteristics were confirmed.

• Korean Journal of Organic Agriculture
• /
• v.23 no.3
• /
• pp.509-522
• /
• 2015

Organic ginseng farming has rapidly increased in response to consumer demand for a safe product which improves health. Differences in soil nutrient concentration and ginsenoside content between organic and conventional ginseng farming have, however, not yet been properly studied. Therefore the aim of the present study was to compare soil nutrient concentration and ginsenoside content between these two farming systems. $NO_3-N$, $P_2O_5$, and K were significantly different between organic and conventional ginseng farming. The total content of ginsenoside and individual ginsenoside components were higher in organically grown ginseng than in ginseng from conventional farming, although there is no significant difference. Particularly, protopanaxadiol saponins were higher than protopanaxatriol saponins in ginseng from organic farming compared to ginseng produced by conventional farming. $NO_3-N$ content in soils showed a negative correlation with the content of ginsenosides $Rb_2$ and Rd. In addition, $P_2O_5$ showed a negative correlation with ginsenosides $Rb_1$, Rc, and PD/PT ratio. Organic matter showed a positive crrelation with ginsenosides Re. To increase the ginsenoside content of ginseng, we recommend increasing organic matter and decreasing $NO_3-N$ and $P_2O_5$ contents in the soil.