• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.343-352
• /
• 2022

Co/Al₂O₃ nanopowder was used as a catalyst to investigate the effect of catalyst support, reduction temperature, sodium borohydride (NaBH₄) concentration, sodium hydroxide (NaOH) concentration, and reaction temperature on the characteristics of NaBH₄ hydrolysis. The Co/Al₂O₃ nanopowder showed a high catalytic activity among various catalysts. Catalyst reduction at 250℃ exhibited a relatively good activity. The activity decreased with an increase in the NaBH₄ concentration. Conversely, the activity increased and then decreased with an increase in the NaOH concentration. Additionally, the activity increased with an increase in the reaction temperature. The value of apparent activation energy was 40.81 kJ/mol, which was lower than the other Co-based catalysts. Thus, Co/Al₂O₃ nanopowder catalyst can be widely used for NaBH₄ hydrolysis owing to its superior catalytic activity.

• 한국기후변화학회지
• /
• 제9권1호
• /
• pp.59-67
• /
• 2018

In this study, the $N_2O$, emitted from combustion facility, were analyzed by using simulated gas and field samples to find out how long samples can be stored in Tedlar bag. According to the results of the experiment using simulated gases (1 ppm, 5 ppm, 10 ppm) in Tedlar bag, After 144hr, $N_2O$ concentration of simulated gases changed that 1 ppm is 5.3%, 5 ppm is 12.8%, and 10ppm is 10.5%. The higher initial concentration of simulated gas was, the larger rate of $N_2O$ concentration was changed. In case of high concentration samples, it need to be careful when it was analyzed after 144 hr. Stability evaluation in Tedlar bag was carried out through field samples such as combustion facility of bituminous coal, B-C oil and LNG. The concentration rate of field samples, which is under 1 ppm of average initial concentration, was evaluated using statistical method. As a result, $N_2O$ concentrations were changed to field samples in the bag even when 96 hr had passed. And after sampling, it is necessary that sample analysis should be quickly as soon as possible.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4265-4271
• /
• 2022

Determination of ¹³⁷Cs, ⁴⁰K and ²¹⁰Po in water, bottom sediments and suspended matter of river systems of the Can Gio Biosphere Reserve, Vietnam was carried out. The average activity concentration of ¹³⁷Cs in waters of Ca Gau and Long Tau was 0.89 ± 0.14 and 1.08 ± 0.15 Bq m^-3 and was comparable to the levels of this radioisotope in waters of the East Sea. The activity concentration of ¹³⁷Cs in bottom sediments was 2.23 ± 0.81 and 3.63 ± 1.24 Bq kg^-1. The activity concentration of ¹³⁷Cs in water and bottom sediments could be characterized as low. So, the water areas of the Ca Gau and Long Tau rivers could be attributed to areas with insignificant pollution by technogenic radionuclides. The ²¹⁰Po activity concentration in bottom sediments of the Ca Gau and Long Tau rivers ranged from 9.2 ± 1.2 to 25.5 ± 2.1 Bq kg^-1, which is typical for river bottom sediments. Such values indicate the absence of anthropogenic enhancement of the entry of this radionuclide into the Can Gio river systems. The ⁴⁰K activity concentration varied within 467 ± 42-651 ± 39 Bq kg^-1 and represented typical values of potassium content in the bottom sediments of coastal water bodies, subject to a significant influence of the lithogenic component of suspended matter.

• 한국환경과학회지
• /
• 제32권9호
• /
• pp.613-626
• /
• 2023

This study investigates the impact of increased adoption of eco-friendly vehicles on ozone (O₃) concentrations in South Korea, utilizing the community multiscale air quality (CMAQ) model. In the summer of 2017 (June-August), we conducted two experiments: a BASE experiment, representing baseline emissions, and an R_30 experiment, involving a 30% emission reduction due to eco-friendly vehicles. The contrast between these experiments reveals that, while most air pollutants decreased with reduced vehicle emissions, O₃ concentrations surprisingly increased (up to 2.1 parts per billion) across South Korea. A further examination of O₃ concentration changes was conducted by analyzing daytime and nighttime variations as well as wind direction. During the daytime, O₃ concentrations notably rose near metropolitan areas due to reduced O₃ titration (O₃ + NO → O₂ + NO₂) resulting from emission reductions. At nighttime, O₃ concentrations exhibited a greater increase, attributed to the transport of daytime-generated O₃ to rural regions. Notably, the impact of reduced emissions in metropolitan areas on O₃ concentrations in downwind areas varied depending on the prevailing wind direction. These findings highlight that the promotion of eco-friendly vehicles, though effective in lowering certain air pollutants, might not directly influence O₃ concentrations. This study underscores the need to comprehensively understand the complicated chemistry of O₃ to develop effective strategies for air quality management.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.

• Corrosion Science and Technology
• /
• 제15권3호
• /
• pp.129-134
• /
• 2016

The effects of Ti on the high temperature oxidation of Ni-based superalloys were investigated by cyclic oxidation at $850^{\circ}C$ and $1000^{\circ}C$. The oxide scale formed at $850^{\circ}C$ consists of $Cr_2O_3$, $Al_2O_3$, and $NiCr_2O_4$ layers, while a continuous $Al_2O_3$ layer was formed at $1000^{\circ}C$. The oxidation rate of the alloy with higher Ti content was higher than the alloy with less Ti content at $850^{\circ}C$, possibly due to the increase in the metal vacancy concentration in the $Cr_2O_3$ layer involved by incorporation of $Ti^{4+}$. However, Ti improved the oxidation resistance of the superalloy at $1000^{\circ}C$ by reducing oxygen vacancy concentration in $Al_2O_3$ layer.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.155-160
• /
• 2020

Ga₂O₃/n-type 4H-SiC heterojunction diodes were fabricated by RF magnetron sputtering. The optical properties of Ga₂O₃ and electrical properties of diodes were investigated. I-V characteristics were compared with simulation data from the Atlas software. The band gap of Ga₂O₃ was changed from 5.01 eV to 4.88 eV through oxygen annealing. The doping concentration of Ga₂O₃ was extracted from C-V characteristics. The annealed oxygen exhibited twice higher doping concentration. The annealed diodes showed improved turn-on voltage (0.99 V) and lower leakage current (3 pA). Furthermore, the oxygen-annealed diodes exhibited a temperature cross-point when temperature increased, and its ideality factor was lower than that of as-grown diodes.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.406-415
• /
• 2018

Here, as-synthesized $Fe_3O_4$ nanoparticles were incorporated into the zeolitic imidazolate framework (ZIF-8) lattice to activate sodium percarbonate (SPC) for degradation of methylene blue (MB). The reaction rate constant of $Fe_3O_4@ZIF-8/SPC$ process ($0.0632min^{-1}$) at acidic conditions (pH = 3) was more than six times that of the $Fe_3O_4/SPC$ system ($0.009min^{-1}$). Decreasing the solute concentration, along with increasing SPC concentration and $Fe_3O_4@ZIF-8$ nanocomposite (NC) dosage, favored the catalytic degradation of MB. The $Fe_3O_4@ZIF-8$ NC after fifteen consecutive treatment processes showed the excellent stability with a negligible drop in the efficiency of the system (<10%). The reaction pathway was obtained via GC-MS analysis.

• 한국환경농학회지
• /
• 제25권1호
• /
• pp.64-70
• /
• 2006

토양의 양분을 고려하지 않고 관비재배 하는 경우는 토양에 양분 과다집적, 지하수 오염 및 작물생산성에 영향을 미칠 수 있다. 토마토 재배시 토양 양분 함량에 따른 최적 관비농도를 알아보고자 토양의 EC 수준에 따라 관비공급 농도를 4 수준으로 처리하여 토양 환경변화와 토마토의 수량을 평가한 결과는 다음과 같다. EC 수준이 1.4, 3.0 및 5.4 dS/m인 토양에 관비농도를 0(groundwater), 1.0, 2.0 및 3.0 dS/m으로 공급하여 토마토를 관비재배 하였을 때 1과중, 상품율 및 상품수량은 처리간에 유의성이 없는 것으로 나타났다. 따라서 적정 수량을 유지하고 토양내 양분집적이 일어나지 않도록 관비하는 것이 가장 좋은 관비방법이라 생각된다. 토양의 EC가 1.4 및 3.0 dS/m인 조건에서 관비 농도를 3.0 dS/m으로 공급한 경우 수확후 토양의 EC는 각각 1.8 및 5.0 dS/m로 생육초기 보다 크게 증가하였고, $NO_3-N,\;P_2O_5$ 및 K등의 양분이 집적 되었다. 따라서 3.0 dS/m 미만으로 관비를 공급하는 것이 토마토의 적정 수량과 토양관리에 바람직할 것으로 생각되었다. 토양의 EC가 5.4 dS/m인 조건에서 관비공급 농도 1.0 dS/m이상은 $NO_3-N,\;P_2O_5$ 및 K등의 양분이 집적되었으며 지하수만 공급하여도 정상적인 수량을 생산할 수 있었다. 토마토 엽의 무기성분 함량은 토양 EC 수준과 관계없이 관비공급 농도를 높였을 때 T-N, $P_2O_5$ 및 $K_2O$ 함량이 증가하였고, CaO와 MgO 함량은 감소하였다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.671-676
• /
• 2014

It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.