• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.242-246
• /
• 2017

고온에서 Mn 이온 용출에 의한 성능저하를 보이는 스피넬 결정구조의 $LiMn_2O_4$ 양극 하이브리드 커패시터의 대안으로 열안정성이 높은 올리빈 결정구조의 $LiFePO_4$ 기반 복합양극 소재의 적용가능성을 연구하였다. $LiFePO_4$/활성탄셀을 이용한 1.0~2.3 V의 충 방전을 통한 수명평가에서 상온($25^{\circ}C$) 및 고온($60^{\circ}C$) 조건 모두에서 충 방전 사이클이 진행됨에 따라 음극(활성탄)의 저전압화에 따른 열화로 인한 용량저하 현상이 나타났다. 이의 해결을 위해 50:50 중량비율로 $LiFePO_4/LiMn_2O_4$, $LiFePO_4$/Activated carbon 및 $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ 복합양극을 제조하여 모노셀 충 방전 실험을 수행한 결과, 층상구조의 $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$를 사용한 전극이 안정적인 전압거동을 보였다. 또한, 2.3 V 및 $80^{\circ}C$에서 1,000시간 부하를 통한 고온 안정성 실험에서도 $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ 복합양극이 상용 $LiMn_2O_4$ 양극에 비해 약 2배 가량 높은 방전용량 유지율을 보였다.

• 한국세라믹학회지
• /
• 제42권4호
• /
• pp.276-281
• /
• 2005

산소분위기, $750^{\circ}C$서 36 h 동안 하소함으로써 연소법에 의해 $LiNi_{1-y}M_{y}O_{2}(M=Zn^{2+},\;Al^{3+},\;and\;Ti^{4+},\;0.000\{\le}y{\le}0.100)$를 합성하였다. 각 시료에 대해 XRD 분석, FE-SEM 관찰, 싸이클 수에 따른 방전 용량의 변화 조사가 행해졌다. $LiNi_{0.99}M_{0.01}O_{2}$ (M=Zn, Al, and Ti) 조성이 여러 조성 중에서 대체로 우수한 전기화학적 특성을 나타내었다. 결정성과 cation mixing의 평가에서 Zn을 치환한 경우 결정성이 나쁘게 나타났고 Ti를 치환한 경우 cation mixing이 크게 나타났으며, Al을 치환한 경우 결정성이 좋고 cation mixing이 적게 나타났다. Al을 치환한 경우 싸이클 특성이 개선되었다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.21-25
• /
• 2013

Nickel substituted manganese ferrites, $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.6$), were fabricated by sol-gel method. The effects of sintering and substitution on their crystallographic and magnetic properties were studied. X-ray diffractometry of $Mn_{0.6}Ni_{0.4}Fe_2O_4$ ferrite sintered above 523 K indicated a spinel structure; particles increased in size with hotter sintering. The M$\ddot{o}$ssbauer spectrum of this ferrite sintered at 523 K could be fitted as a single quadrupole doublet, indicative of a superparamagnetic phase. Sintering at 573 K led to spectrum fitted as the superposition of two Zeeman sextets and a single quadrupole doublet, indicating both ferrimagnetic and paramagnetic phase. Sintering at 673 K and at 773 K led to spectra fitted as two Zeeman sextets due to a ferrimagnetic phase. The saturation magnetization and the coercivity of $Mn_{0.6}Ni_{0.4}Fe_2O_4$ ferrite sintered at 773 K were 53.05 emu/g and 142.08 Oe. In $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.6$) ferrites, sintering of any composition at 773 K led to a single spinel structure. Increased Ni substitution decreased the ferrites' lattice constants and increased their particle sizes. The M$\ddot{o}$ssbauer spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and the octahedral sites of the $Fe^{3+}$ ions. The variations of saturation magnetization and coercivity with changing Ni content could be explained using the changes of particle size.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.778-781
• /
• 1995

The mixed ferrite $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been investigated by X-ray and $M\"{o}ssbauer$ spectoscpy. From the results of X-ray diffraction measurement the structure for this system is spinel, and the lattice constant is in accord with Vegard's law. $M\"{o}ssbauer$ spectra of $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been taken at various temperature ranging from 13 to 800 K. The isomer shifts indicate that the valence states of the irons at both A(tetrahedral) and B(octahedral) sithe are found to be in ferric high-spin states. The variation of magnetic hyperfine fields at the A and B sites are explained on the basis on A-B and B-B supertransferred hyperfine interactions. It is found that Debye temperatures for the A and B sites of $CoFe_{2}O_{4}$ and $NiFe_{2}O_{4}$ are found to be ${\theta}_{A}=734{\pm}5K,\;{\theta}_{B}=248{\pm}5K,\;and\;{\theta}_{A}=378{\pm}5K,\;{\theta}_{B}=357{\pm}5K$, respectively. Atomic migration of $Ni_{0.3}Co_{0.7}Fe_{2}O_{4}$ starts near 450 K and increases rapidly with increasing temperature to such a degree that 61 % of the ferric ions at the A site have moved over to the B site by 700 K.

• 청정기술
• /
• 제23권1호
• /
• pp.27-33
• /
• 2017

본 연구에서는 중금속 7종(Cu, Cd, Cr, As(III), As(V), Zn, Ni) 및 나노입자 5종(CuO, ZnO, NiO, $TiO_2$, $Fe_2O_3$)에 대한 독성을 수계 대표 생물종인 녹조류 Chlorella vulgaris를 이용한 생물검정법으로 평가하였다. 조류에 미치는 영향은 흡광도, 클로로필 및 개체수 측정에 대한 결과를 통합하여 평가하였다. 중금속의 통합결과독성($TEC_{50}$) 순서는 Cr ($0.7mgL^{-1}$) > Cu ($1.7mgL^{-1}$) > Cd ($3.2mgL^{-1}$) > Zn ($3.9mgL^{-1}$) > Ni ($13.2mgL^{-1}$) > As(III) ($17.8mgL^{-1}$) ${\gg}$ As(V) (> $1000mgL^{-1}$)로 나타났다. 중금속은 측정종말점에 따라 일부 상이한 민감도와 독성이 조사되었다. 나노입자의 독성($TEC_{50}$) 순서는 ZnO ($2.4mgL^{-1}$) > NiO ($21.1mgL^{-1}$) > CuO ($36.6mgL^{-1}$) > $TiO_2$ ($62.5mgL^{-1}$) > $Fe_2O_3$ ($82.7mgL^{-1}$)로 나타났다. 나노입자는 측정종말점간에 비슷한 민감도와 독성을 보였다. 따라서 오염물의 독성을 평가하기 위해서 단일 방법에 의한 결과보다는 다양한 측정종말점의 통합결과에 근거한 접근이 적절할 것이다.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.296-300
• /
• 2017

NiO nanofibers with Au nanoparticles were synthesized by sol-gel and electrospinning techniques, in which the reduction process by ultraviolet exposure is included for the growth of Au nanoparticles in the electrospinning solution. FE-SEM(Field Emission Scanning Electron Microscopy), TEM(Transmission Electron Microscopy) revealed that the synthesized nanofibers had the diameter of approximately 200 nm. X-ray diffraction showed the successful formation of Au-decorated NiO nanofibers. Gas sensing tests of Au-decorated NiO nanofibers were performed using reducing gases of CO, and $C_6H_6$, $C_7H_8$, $C_2H_5OH$. Compared to as-synthesized NiO nanofibers, the response of Au-loaded NiO nanofibers to CO gas was found to be about 3.4 times increased. On the other hand, the response increases were only 1.1-1.3 times for $C_6H_6$, $C_7H_8$, and $C_2H_5OH$.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.104-108
• /
• 2001

NiO 스핀밸브 박막을 제작하고 이를 공기중에서 80 일간 자연산화시킨후, 형성된 산화층에 의한 NiO 스핀밸브 박막의 자기저항 특성을 연구하였다. NiO(600 $\AA$)Ni$_{81}$$Fe_{19}$(50$\AA$)/Co(7 $\AA$)/Cu(20 $\AA$)/Co(7 $\AA$)Ni$_{81}$$Fe_{19}$(70 $\AA$)의 구조를 갖는 스핀밸브박막을 공기중에서 약 80일 간 자연산화시켰을 때, 자기저항비와 교환결합력( $H_{ex}$)이 각각 4.9%와 110 Oe에서 7.3%와 170 Oe로 증가하였다. 이때, 스핀밸브박막의 비저항($\rho$)값은 28$\mu$$\Omega$m에서 17$\mu$$\Omega$m로 감소하였지만 박막의 비저항값의 변화량($\Delta$$\rho$)는 크기변화가 거의 없는 것을 알 수 있었다. 그러므로, 자기저항비의 증가는 자연산화에 따른 비저항값의 감소에 기인한 것으로 생각되며, 저항의 감소는 specular 효과 때문인 것으로 판단된다. 스핀밸브박막의 표면에 형성된 NiFe 산화층의 두께는 약 20 $\AA$인 것으로 추정되며, Auger electron spectroscopy(AES)를 이용하여 분석하였다.하였다.다.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.431-439
• /
• 2006

Catalytic oxidation of benzene, toluene and xylene (BTX) using regenerated metal oxide catalysts (ZnO-CuO, NiO, $Fe_2O_3$, ZnO, CrO) were investigated in a fixed bed flow reactor to evaluate their feasibility for the purpose of removing volatile organic compounds (VOCs). Four kinds of pre-treatment methods such as gas (air and hydrogen), acid aqueous solution, alkali aqueous solution and cleaning agent were used to find out the optimal regeneration conditions. The physico-chemical properties of the used and regenerated catalysts were characterized by BET and TPR (Temperature Programmed Reduction). The used catalysts showed high conversion ratio and the catalytic ability of toluene oxidation was in the order of ZnO-CuO>$Fe_2O_3$>NiO>ZnO>CrO. We found that the acid aqueous pre-treatment (0.1 N HNO$_3$) was the best way to enhance the catalytic activity of $Fe_2O_3$. In addition, air and hydrogen gas treatment were optimal for NiO and ZnO-CuO catalysts, respectively. Furthermore, the decomposition of BTX depends on the type of a catalyst and a gas molecule.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1140-1142
• /
• 1993

It has been prepared by a coprecipitation method for Ferroxplana $Ni_2Y\;(Ba_2Ni_2Fe_{12}O_{22}$ magnetic particles, which is one of the Hexagonal ferrite. The coprecipitates were synthesized by adding aqueous solution of $BaCl_2{\cdot}2H_2O,\;NiCl_2{\cdot}6H_2O\;and\;FeCl_2{\cdot}4H_2O$ (of which the mole ratio is $Ba^{2+}:Ni^{2+}:Fe^{2+}$=1:1:6) to a mixture of NaOH and $Na_2CO_3$ solution. The shape of Ferroxplana $Ni_2Y$ magnetic particles obtained at the calcined temperature 1,100($^{\circ}C$) was hexagonal plate-like, average particle size was 2(${\mu}m$), and aspect ratio was more than 7.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.167-173
• /
• 2011

Nickel cobalt ferrite($Ni_{0.5}Co_{0.5}Fe_2O_4$) powder was prepared through the ceramic route by the calcination of a stoichiometric mixture of NiO, CoO and $Fe_2O_3$ at $1100^{\circ}C$. The pressed pellets of $Ni_{0.5}Co_{0.5}Fe_2O_4$ were isothermally reduced in pure hydrogen at $800{\sim}1100^{\circ}C$. Based on the thermogravimetric analysis, the reduction behavior and the kinetic reaction mechanisms of the synthesized ferrite were studied. The initial ferrite powder and the various reduction products were characterized by X-ray diffraction, scanning electron microscopy, reflected light microscope and vibrating sample magnetometer to reveal the effect of hydrogen reduction on the composition, microstructure and magnetic properties of the produced Fe-Ni-Co alloy. The arrhenius equation with the approved mathematical formulations for the gas solid reaction was applied to calculate the activation energy($E_a$) and detect the controlling reaction mechanisms. In the initial stage of hydrogen reduction, the reduction rate was controlled by the gas diffusion and the interfacial chemical reaction. However, in later stages, the rate was controlled by the interfacial chemical reaction. The nature of the hydrogen reduction and the magnetic property changes for nickel cobalt ferrite were compared with the previous result for nickel ferrite. The microstructural development of the synthesized Fe-Ni-Co alloy with an increase in the reduction temperature improved its soft magnetic properties by increasing the saturation magnetization($M_s$) and by decreasing the coercivity($H_c$). The Fe-Ni-Co alloy showed higher saturation magnetization compared to Fe-Ni alloy.