• Proceedings of the Korean Vacuum Society Conference
• /
• 2002.06a
• /
• pp.60-60
• /
• 2002

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.769-779
• /
• 2007

Statement of problem. When TiN coating is applied to the abutment screw, occurrence of greater preload and prevention of the screw loosening could be expected due to decrease of frictional resistance. However, the proper thickness of TiN coating on abutment screw has not been yet reported. Purpose. The purpose of this study is to find out the appropriate TiN coating thickness by evaluating the detorque force and the surface change of titanium abutment screw with various TiN coating thickness. Material and methods. 1. Material Thirty five non-coated abutment screws were prepared for TiN coating. TiN coatings were prepared by Arc ion plating method. Depending on the coating deposition time(CDT), experimental groups were divided into 6 groups(CDT 30min, 60min, 90min, 120min, 150min, 180min) and those of 1 group was not coated as a control group. Each group was made up of 5 abutment screws. 2. Methods FE-SEM(Field Emission Scanning Electron Microscoper) and EDX(Energy Dispersive X-ray Spectroscopy) were used to observe the surface of the abutment screw. Electric scales was used to measure the weight of the abutment screw after the repeated closing and opening of 10 trials. Detorque force was measured with digital torque gauge, at each trial. Results. 1. As the coating deposition time increased, the surface became more consistent and smooth. 2. As for the abutment screws that were TiN coated for more than 60 minutes, no surface change was found after the repeated closing and opening. 3. The TiN coated abutment screws showed less weight change than the non-coated abutment screws. 4. The TiN coated abutment screws showed higher mean detorque force than the noncoated abutment screws. 5. The abutment screw coated for 60 minutes showed the highest mean detorque force. Conclusion. The coating layer of proper thickness is demanded to obtain consistent and smooth coating surface, resistance to wear, and increased detorque force of the abutment screw. In conclusion, the coating deposition time of 60 minutes indicated improved mechanical property, when TiN coating was conducted on titanium abutment screw.

• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.117-122
• /
• 1997

On the basis of our previous paper[Bull. Korean Chem. Soc. 1995, 16, 1015], the relative stability, ionization potential, and chemical reaction of the neutral and multiply charged $C_{60}$n ions(n=3+ to 6-) have been investigated by the semi-empirical MNDO method. $C_{60}^{1-}$ has the highest stability. The ionization potential values of the $C_{60}$ ions range from 15.31 eV of $C_{60}^{2+}$ to -13.01 eV of $C_{60}^{6-}$. These values show a linear relationship according to charges. The average IP per charge is 3.15 eV from our calculations and 3.22 eV from the linear function of IP. A charge- or electron-transfer reaction of $C_{60}^{n+}$ will only occur if the ionization potential of any guest molecule is lower than the electron affinity of the host $C_{60}^{n+}$. If the energy gap between ionization potential and electron affinity, ${\Delta}_{IP-EA}$, is high, charge-transfer reactions arise by the charge-controlled effect. However, if ${\Delta}_{IP-EA}$ is low, electron-transfer reactions arise by the frontier-controlled effect.

• Journal of Acupuncture Research
• /
• v.23 no.5
• /
• pp.127-144
• /
• 2006

Background and Purpose : Though there were many clinical studies of acupuncture effects they didn't have appropriate control group. So we didn't say it was true acupuncture effect, though subjects in clinical study improved. To investigate the possibility of sham acupuncture application, we examined how well subjects distinguished real acupuncture from sham acupuncture. Methods : We investigate the possibility of sham acupuncture application as the following 3 kinds of methods. 1. The public (n=60) and Oriental Medicine Doctors (n=20) looked at the appearance of acupuncture and then were treated with randomly allocated acupuncture and judged it as real or sham. 2. The public (n=60) and Oriental Medicine doctors (n=20) were treated with randomly allocated acupuncture, then they looked at the appearance of acupuncture and judged it as real or sham. 3. The public (n=60) were treated with randomly allocated acupuncture (right-real-left-sham), (right-sham-left-real), (left-real-right-sham), (left-sham-right-real), then they judged it as real or sham. Results : 1. When the public (n=60) looked at the acupuncture appearance, the correct judgement ratio was 63.3%. After they were treated with acupuncture, the correct judgement ratio was 50.0%. 2. When Oriental Medicine doctors (n=20) looked at the acupuncture appearance, the correct judgement ratio was 25.0%. After they were treated with acupuncture, the correct judgement ratio was 45.0%. 3. When the public (n=60) were treated with acupuncture, the correct judgement ratio was 50.0%. After they looked at the acupuncture appearance, the correct judgement ratio was 63.3%. 4. When Oriental Medicine doctors (n=20) were treated with acupuncture, the correct judgement ratio was 65.5%. After they looked at the acupuncture appearance, the correct judgement ratio was 65.0%. 5. After the public (n=60) were treated with randomly allocated sham or real acupuncture as (right-real-left-sham), (right-sham-left-real), (left-real-right-sham), or (left-sham-right-real). the correct judgement ratio was 66.7% in looking at the acupuncture appearance group, and in not looking at 60.0%. Conclusion : These results indicated that Kim Sham Acupuncture could apply to the double blind clinical study of acupuncture effect. And more continuous studies are needed on Sham Acupuncture apparatus.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.372-376
• /
• 2008

Vacuum deposited 4,4',4"-tris(N-(2-naphthyl)-N-phenylamino)-triphenylamine (2-TNATA), used as a hole injection (HIL) material in OLEDs, is placed as a thin interlayer between indium tin oxide (ITO) electrode and a hole transporting layer (HTL) in the devices. C60-doped 2-TNATA:C60 (20 wt%) film was formed via co-evaporation process and molecular ordering and topology of 2-TNATA:C60 films were investigated using XRD and AFM. The J-V, L-V and current efficiency of multi-layered devices were characterized as well. Vacuum-deposited C60 film was molecularly oriented, but neither was 2-TNATA:C60 film due to the uniform dispersion of C60 molecules in the film. By using C60-doped 2-TNATA:C60 film as a HIL, the current density and luminance of a multi-layered ITO/2-TNATA:C60/NPD/$Alq_3$/LiF/Al device were significantly increased and the current efficiency of the device was increased from 4.7 to 6.7 cd/A in the present study.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.706-712
• /
• 1997

AlN(Aluminium Nitride) thin films were prepared using by RF sputtering method on the Si(100) and Si(111) substrates as the parameters of the substrate temperature, RF power, sputtering duration and the $N_2$/Ar ratio and investigated by X-ray diffraction, IR spectrometry, n&k analyzer. For the Si(100) substrate, the AlN thin films of (101) orientation were obtained under the conditions of room temperature and the nitrogen of 60 vol.%. For the Si(111) substrate, the (002) AlN thin films were obtained under the nitrogen of 100 vol.%. In case of the thin film prepared in the condition of above 60 vol.% of the nitrogen, the average value of the surface roughness of the film was 151$\AA$. From the changes of the half widths of E$_1$[TO] phonon bands at the wavenumber of 680$cm^{-1}$ /, it were compared of the crystallinities of the films which were grown under the different conditions. The thicknesses of AlN films were decreased dramatically in the region of the nitrogen of 40~60 vol.%. Its due to the nitridation of the Al target surface and getting low of the sputtering yield by the $N_2$/Ar ratio being increased.

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.49-57
• /
• 1994

The binding properties of oxomemazine to muscarinic receptors using the ability of oxomemazine to inhibit $[^3H]QNB$ binding in membrane fractions of rat cerebrum and guinea pig ventricle and ileum were investigated. $[^3H]QNB$ bound to a single class of muscarinic receptors with a dissociation constant of approximately 60 pM in three tissue preparations. Pirenzepine and oxomemazine inhibited $[^3H]QNB$ binding in cerebrum with a Hill coefficient lower than unity, and the inhibition data were best described by a two-site model. The relative densities of the high $(M_1)\;and\;low\;(M_2)$ affinity sites for pirenzepine were 60 and 40%, with corresponding Ki values of 16 and 431 nM, and those $(O_H\;and\;O_L)$ for oxomemazine 40 and 60%, with corresponding Ki values of 80 and 1350 nM. However, the inhibition data of both drugs vs $[^3H]QNB$ in ventricle and ileum appeared to obey the law of mass-action (Hill coefficient close to 1). The apparent Ki values of pirenzepine were 850 and 250 nM, and those of oxomemazine 1460 and 570 nM in ventricle and ileum, respectively. Thus, oxomemazine like pirenzepine has high affinity for cerebrum, moderate affinity for ileum and low affinity for ventricle. These results suggest that oxomemazine could recognize the muscarinic receptor subtypes with a high affinity for the $M_1$ sites.

• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.445-450
• /
• 2006

The preparation of AlN powder by SHS in the system of $Al-AlN-NH_4Cl$ was investigated in this study. In the preparation of AlN powder, the effect of gas pressure and the composition such as Al, AlF, and additive in mixture on the reactivity were investigated. At 60 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure AlN was 35 wt%Al+5 wt% $NH_4Cl+60wt%$AlN. The AlN powder synthesized in this condition was a single phase AlN with a whisker morphology.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.185-194
• /
• 1995

The prevention of excessive use of nitrogen fertilizer get an attention in Korea not only for minimizing $NO_3^-$ contamination of groundwater but also for establishment of environmental friendly sustainable agriculture. In order to find out the dynamics of $NO_3^-$ in barley rhizosphere and its suitability for nitrogen fertilization strategies and for environmental control, the accumulation of $NO_3^-$ in 3 layer, 0~30cm, 30~60cm, 60~90cm of soil profile has been detected in winter barley pro-duction system. It showed the recommended N fertilization rate for winter barley cause the $NO_3^-$ contamination of groundwater through $NO_3^-$ leaching during winter. The $NO_3^-$ content of 0~90cm soil depth have directly reflected the amount of basal N fertilization in the early spring, but not 0~30cm and 0~60cm soil depth. The contents of $NO_3^-$ measured to 0~30cm, 0~60cm soil depth were not significanly correlated with yield but the contents of $NO_3^-$ measured to 90cm soil depth was highly correlated with yield. Nitrogen fertilizer requirement could be estimated accurately by soil test and it provides field specific N rate recommendation for spring N application to winter barley. It was concluded that $N_{min}$ method could be applied to korean climatic and soil condition for optimal fertilizer application rate.

• Kyungpook Mathematical Journal
• /
• v.60 no.4
• /
• pp.723-729
• /
• 2020

Let ℤ_n be the ring of integers modulo n and let ℤ_n[X]] be either ℤ_n[X] or ℤ_n[[X]]. Let 𝚪(Z_n[X]]) be the zero-divisor graph of ℤ_n[X]]. In this paper, we study some properties of 𝚪(ℤ_n[X]]). More precisely, we completely characterize the diameter and the girth of 𝚪(ℤ_n[X]]). We also calculate the chromatic number of 𝚪(ℤ_n[X]]).