• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.628-633
• /
• 2008

ZnO nanopowders were synthesized by the sol-gel method using hydrazine reduction, and their gas responses to 6 gases (200 ppm of $C_2H_5OH$, $CH_3COCH_3$, $H_2$, $C_3H_8$, 100 ppm of CO, and 5 ppm of $NO_2$) were measured at $300\;{\sim}\;400^{\circ}C$. The prepared ZnO nanopowders showed high gas responses to $C_2H_5OH$ and $CH_3COCH_3$ at $400^{\circ}C$. The sensing materials prepared at the compositions of [$ZnCl_2$]:[$N_2H_4$]:[NaOH] = 1:1:1 and 1:2:2 showed particularly high gas responses ($S\;=\;R_a/R_g,\;R_a$ : resistance in air, $R_g$ : resistance in gas) to 200 ppm of $C_2H_5OH$($S\;=\;102.8{\sim}160.7$) and 200 ppm of $CH_3COCH_3$($S\;= 72.6{\sim}166.2$), while they showed low gas responses to $H_2$, $C_3H_8$, CO, and $NO_2$. The reason for high sensitivity to these 2 gases was discussed in relation to the reaction mechanism, oxidation state, surface area, and particle morphology of the sensing materials.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.21-28
• /
• 2010

Air pollution monitoring has attracted a lot of interests because it affects directly to the human life quality. The most of the current air pollution monitoring stations use the expensive and bulky instruments and are only installed in the specific area. Therefore, it is difficult to install them to as many places as people need. In this work, we constructed a low price and small size Radio Frequency(RF) sensor system to solve this problem. This system also had the measurement range similar to the ones used in the air pollution forecast systems. This system had the sensor unit to measure the air quality, the central processing unit for air quality data acquisition, the power unit to supply the power to every units, and the RF unit for the wireless transmission and reception of the data. This system was easy to install in the field. We also added a GPS unit to track the position of the RF-sensor in real time by wireless communication. For the various measurements of the air pollution, we used CO, $O_3$, $NO_2$ sensors as gas sensors and also installed a dust sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.11-17
• /
• 2022

Direct exposure to toxic and hazardous gases has always been considered as the most pervasive problem worldwide, leading to a gradual increase in the number of asthma patients due to NO_x/SO_x gases inhaling and exposure to 50 ppm formaldehyde gases. Therefore, the development of accurate gas sensors is a key issue for resolving these problems. To address such issues, the development of membranes for selective filtering of target molecules as well as nanocatalyst for enhancing the sensing selectivity is highly crucial. In this review, the research progress for porous membrane materials (e.g. MOFs, and graphene) and nanocatalyst technology for the development of selective and accurate gas sensors will be discussed.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.973-980
• /
• 2003

The effects of additives in n-type semiconducting SnO$_2$-based gas sensors on oxidizing gases were investigated. The resistivity of SnO$_2$ sensors decreased when exposed to reducing gases, which act as electronic donors. However, the resistivities of the SnO$_2$ sensors increased when exposed to oxidizing gases, which act as electronic accepters. The products formed from the reaction of oxidizing gases ever SnO$_2$-based powders were analyzed by gas chromatography as compared with those formed from the reaction of reducing gases of alcohols. The SnO$_2$ sensors doped with PdCl$_2$ or A1$_2$O$_3$ showed unique dual response patterns toward oxidizing gases of $CH_3$CN and $CH_3$NO$_2$ depending on the operating temperature. The combination of these two sensors along with proper pattern recognition technique could enhance the selectivity for the gases with electron-accepting groups.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.778-783
• /
• 2000

Effects of the $Al_2$O$_3$surface protective layer, deposited on the SnO$_2$sensing layer by aerosol flame deposition (AFD) method, on the sensing properties of SnO$_2$thin film ags sensors were investigated.Effects of Pt doping to the $Al_2$O$_3$surface protective layer on the selectivity of CH$_4$ gas were also investigated. 0.3$\mu\textrm{m}$ thick SnO$_2$thin sensing layers on Pt electrodes were prepared by R.F. magnetron sputtering with R.F. power of 50 W, at working pressure of 4mTorr, and at 20$0^{\circ}C$ for 30 min. $Al_2$O$_3$surface protective layers on SnO$_2$layers were prepared by AFD using a diluted aluminum nitrade (Al(NO$_3$).9$H_2O$) solution. The sensitivity of CO gas in the SnO$_2$gas sensor with an $Al_2$O$_3$surface protective layer was significantly decreased. But that of CH$_4$gas remained almost same with pure SnO$_2$gas sensor. This result shows that the selectivity of CH$_4$gas is increased because of the $Al_2$O$_3$surface protective layer. In the case of SnO$_2$gas sensors with Pt-doped $Al_2$O$_3$surface protective layers, low sensing property to CO gas and high sensing property to CH$_4$were observed. This results in the increasing of selectivity of CH$_4$gas selectivity are discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.176.2-176.2
• /
• 2014

In this work, we demonstrated that the fabrication of flexible graphene-based chemical sensor with heaters by soft lithographic patterning method [1]. First, monolayer and multilayer graphene were prepared by thermal chemical vapor deposition transferred onto SiO2 / Si substrate in order to fabrication of patterned-sensor and -heater. Second, patterned-monolayer and multilayer graphene were detached through soft lithography process, which was transferred on top and bottom sides of PET film. Third, Au / Ti (Thickness : 100/30 nm) electrodes were deposited end of the patterned-graphene line by sputtering system. Finally, we measured sensor properties through injection of NO2 and CO2 gas on different temperature with voltage change of graphene heater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.658-663
• /
• 2018

Current measuring methods for air quality are based on ground measurement networks and satellite data. New methods of collecting evidence with advanced sensors are needed because current methods have limitations in collecting evidence for the illegal emission of air pollutants at narrow areas or specific sites. This study analyzed the possibility of using an ultraviolet hyperspectral sensor to measure the concentration of nitrogen dioxide and sulfur dioxide. Two types of spectra were used: simulated spectra for gases with various concentrations using a radiative transfer model and observed spectra for each gas for a concentration. To understand the possibility of using a hyperspectral sensor, the differences between the simulated spectra and the observed spectra were analyzed, and the variation of simulated spectra were then analyzed according to the concentration. The results showed good agreement between observed spectra and simulated spectra. In addition, the absorption depth at specific wavelengths in the simulated spectra had a very strong correlation with the gas concentration. The gas concentration could be estimated using the hyperspectral sensor. In the future, validation would be needed to estimate the gas concentration through observations of various concentrations of gases using a hyperspectral sensor.

• Journal of Adhesion and Interface
• /
• v.21 no.2
• /
• pp.51-57
• /
• 2020

Recently, there has been growing interest in the study of removal of harmful and hazardous pollutants emitted by industrial activities. In this study, we have developed porous activated carbon fibers prepared by a water vapor activation method and analyzed the adsorptions of the harmful gases with electrochemical responses of activated carbon fibers. To control the uniformity of pore structures, active reaction areas, and active sites, the reaction conditions of activation temperatures were varied from 750 to 850 ℃ with the predetermined reaction time intervals (30 to 240 min). The SO₂ and NO gas adsorptions of activated carbon fibers prepared by various reaction conditions were analyzed and monitored by electrochemical sensor responses. In particular, the activated carbon fibers prepared at the reaction temperature of 850 ℃ and time of 45 min showed the highest specific surface area (1,041.9 ㎡/g) and pore characteristics (0.42 ㎤/g), and excellent adsorption capabilities of SO₂ (1.061 mg/g) and NO (1.210 mg/g) gases, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.280-285
• /
• 1999

$\alpha$-$Fe_2O_3$ thin film gas sensors were deposited at various temperature by CVD method. Polycrystalline $\alpha$-$Fe_2O_3$ thin films were deposited at $175^{\circ}C$ and $200^{\circ}C$. $\gamma$-$\alpha$-$Fe_2O_3$ phase was obtained when the deposition temperature was higher than $250^{\circ}C$. The crystallite size of $\alpha$-$Fe_2O_3$ was affected by the deposition and annealing temperature. The specimen deposited at $175^{\circ}C$ showed maximum sensitivity. In this condition, the sensitivity of $\alpha$-$Fe_2O_3$ thin film for NO gas (at 250 ppm) was 3.2 and response time (at 100ppm) was 12 second.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.150-153
• /
• 1997

Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic ultra-thin films. It is well known that It has the advantage to control the alignment and orientation of the molecules in the films. Metallo-phthalocyanines(MPcs) are sensitive to electron affinitive toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermal, optical, mechanical, chemical stable. Therefore, it is interesting to prepare phthalocyanine LB films containing copper as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. In this study, thin films of Octa-dodecylosy copper-phthalocyanine were prepared by LB technique. $\pi$-A isotherm, transfer ratio, UV-VIS. spectroscopy of these films were investigated. Also current-voltage(I-V) characteristics of these was auto investigated.