• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.572-583
• /
• 2012

In this study, we investigated visual fatigue in i3D system and basic factors that contribute to visual fatigue in the system. i3D is a type of glasses-free display which supports elementary manual interaction of users with the display. In Experiment 1, we performed open-ended survey of visual fatigue and collected responses from observers which then were used as survey questions for visual fatigue. The questions were validated by factor analysis from which we derived fatigue measurement scale. In Experiment 2, we measured visual fatigue in various conditions using survey questions obtained from Experiment 1. Using manual interaction (present/absent), viewing distance(1/2/4m), and viewing orientation($0/28/56^{\circ}$) as three factors in within-subject design, we measured visual fatigue in each condition. The results indicated that visual fatigue deceases with farther viewing distance, but viewing orientation and manual interaction does not influence visual fatigue. Although fatigue unexpectedly decreased in an extreme viewing condition (e.g., distance 1m, orientation $56^{\circ}$), the results were obtained because of technical limitation of glasses-free 3D display. General discussion provides discussion on limits of the current study and suggestions for future research.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.903-915
• /
• 2020

Long-term high-resolution hydro-meteorological data has been recognized as an essential element in establishing the water resources plan. The increasing demand for spatial precipitation in various areas such as climate, hydrology, geography, ecology, and environment is apparent. However, potential limitations of the existing area-weighted and numerical interpolation methods for interpolating precipitation in high altitude areas remains less explored. The proposed PRISM (Precipitation-Elevation Regressions on Independent Slopes Model) model can produce gridded precipitation that can adequately consider topographic characteristics (e.g., slope and altitude), which are not substantially included in the existing interpolation techniques. In this study, the PRISM model was optimized with SCEM-UA (Shuffled Complex Evolution Metropolis-University of Arizona) to produce daily gridded precipitation. As a result, the minimum impact radius was calculated 9.10 km and the maximum 34.99 km. The altitude of coastal weighted was 681.03 m, the minimum and maximum distances from coastal were 9.85 km and 38.05 km. The distance weighting factor was calculated to be about 0.87, confirming that the PRISM result was very sensitive to distance. The results showed that the proposed PRISM model could reproduce the observed statistical properties reasonably well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.257-263
• /
• 2010

We studied about the difference of division public announcements by corporation size and ownership structure from 1999 to 2005. The results is as follow : First, we found most positive numbers in division corporation's CAR. This supports the existing research that corporation division is evaluated positively in the market. We found CAR as largest shareholders' holding more than 40%, which is greater than 0-20% & 20-40%, that shows relatively more negative CAR. So, the exceeded largest shareholders' holding rate (i.e., over 40%) can be a factor for decreasing corporations' value. Also, most positive CAR shows relatively small variation regarding corporation size knowing that big sized corporations have relatively small variation than small sized corporations. Second, we studied about relationship between corporate ownership structure and division public effects and found relatively a little effect by large shareholders, foreign investors' holding variables on division public.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.575-581
• /
• 2020

A colorless antistatic agent was prepared for use in antistatic films for liquid crystal displays (LCDs) requiring low surface resistance and high transmittance. Among various lithium-fluoro compounds and quaternary ammonium salts, antistatic materials were selected based on their electrical conductivity, and antistatic agents were prepared to measure the surface resistance. As a result, the material with high conductivity showed a relatively low surface resistance, i.e., relatively good antistatic performance. Based on the antistatic materials selected, the formulation ratio for producing the best antistatic agent was established through the experimental design method and the effects of each factor were analyzed. The higher the use of lithium- fluoro compounds as antistatic materials, the higher the ratio of oligomer use with multi-functional groups, and the smaller the surface resistance. The quaternary ammonium salts increased the antistatic performance of the lithium-fluoro compounds, but the effects of the amount used were not relatively large. After manufacturing the antistatic PET film, the properties of the antistatic film showed low surface resistance values (<10⁹ Ω/sq.), high permeability (>92%), low haze (<0.5%), and high whiteness (L^⁎>95). In addition, the antistatic film reliability was found to be excellent by showing a stable surface-resistance change rate of less than 10%, even under high temperature and high humidity conditions.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.77-84
• /
• 2015

This study was conducted to investigate the characteristics of antibiotic resistant E. coli. its antibiotic susceptibility and pathogenicity were analyzed via molecular convergence technique, for the relationship of antibiotic susceptibility and pathogenicity. The 60 isolated strains consisted of ESBL(+)(8) and ESBL(-)(52) strains. The ESBL(+)(8) strains consisted of 2 strains without a pathogenic gene, stb(3), flich7(1), and flich7-eae(2). The ESBL(-)(52) strains consisted of 26 strains without a pathogenic gene, stx1(3), stb(10), flich7(2), eae(2), stx1-flich7(2), stx1-stb(4), flich7-stb(2), and flich7-stb-eae(1). In conclusion, antibiotic resistance is increasingly, Focused on molecular convergence, showed the correlation of pathogenicity with antibiotic resistance was poor. However, It will be able to find the exact pathogenic factor in the future through convergence technique including the analysis of virulence genes.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.1
• /
• pp.71-82
• /
• 1997

The squid fishery from the East China Sea has increased in importance in recent years, for management of resources were carried out selection experments using diamond and square mesh cod-end with enclosing small mesh cover net by trouser net method during 1991-1994 year. Mesh selection studies on Short-finned squid and Long-finned squid divided from catches by trial experiments. The results that square mesh cod-end retained proportionally fewer small and undersized Short-finned squid and Long-finned squid, square mesh cod-end were greater selection factor and 50% selection length than diamond mesh cod-end.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.395-411
• /
• 1993

The purpose of this study was to examine the clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, the cavities were prepared on maxillary first premolar and filled with gold inaly. A two - dimensional model was composed of 1037 - node triangle elements. In this model, isthmus was varied in width at 1/4, 1/3 and 1/2 of intercuspal width and material properties were given for four element groups, i.e., enamel, dentin, pulp and gold. The 500N occlusal load varied in direction and it was examined using three types of load : concentrated load, divided load and distributed load. The models were also examined with empty cavities using the devided load and distributed load. These models were analyzed the displacement and strees distribution by the two - dimensional Finite Element Method. The results were as follows : 1. All experimental models which filled with gold inlay after cavity preparation were similar direction of displacement with control model under same load type. But in the models with empty cavities, as isthmus width was wider, the degree of displacement was increased at same load type. 2. Among the experimental models which were filled with gold inaly after cavity preparation, the model II showed the least stress concentration under concentrated load and divided load. But in the models with empty cavities, the model III showed the largest stress concentration and tooth fracture is expected regardless isthmus width. 3. All experimental models showed similar displacement pattern beneath restorative material under a concentrated load. In the models with empty cavities, a divided load resulted in a lingual displacement of the lingual cusp, but a distributed load resulted in a buccal displacement of the lingual cusp. In regard to the above results, the restored models were stronger than empty models in respect to the bending moment and tensile stress. The empty models are expected to fracture regardless isthmus width. The safest isthmus width was 1/3 of intercuspal distance, which showed the least stress concentration in respect to the effect of stress distribution.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.118-125
• /
• 2018

Tuberculosis (TB) is an infectious disease caused by Mycobacterium tuberculosis (MTB), but the genes associated with the host immune system can be attributed to the development of TB. The ITGB2 gene encodes the integrin beta 2 chain CD18 protein and is present on chromosome 21. The integrin beta 2 chain is an integrin expressed in leukocytes and plays a very important role in leukocyte maturation and attachment. ITGB2 plays an important role in the phagocytosis of MTB and the aggregation of leukocytes in MTB infections. This study examined the genetic polymorphisms of the ITGB2 gene between the TB case and normal control using Korean genomic and epidemiologic data. As a result, a statistically significant correlation was confirmed in 10 SNPs. The most significant SNP was rs113421921 (OR=0.69, CI: 0.53~0.90, $P=5.8{\times}10^{-3}$). In addition, rs173098, one of the significant 10 SNPs, is possibly located in a binding motif with the transcription factor cofactor p300, and can affect ITGB2 gene expression. These findings suggest that the pathogenesis of TB may be influenced by a range of genetic factors related to the immune function of the host, e.g., the reactions associated with the recruitment and attachment of leukocytes. The results of this study could be used to predict the infection control for tuberculosis in a patient-tailored manner.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.5 no.1
• /
• pp.162-171
• /
• 1994

Objects : This study was carried out to develop the Korean form of Leyton Obsessional Inventory-Child Version(LOI-CV) designed to assess the obsessive compulsive symptoms in children and adolescents. The LOI-CV was modified into a paper-and-pencil form in order to administer it to group. Methods : We applied the Korean form LOI-CV to 127 elementary, middle and high school children, and retest it to 82 children with 3 weeks interval. Together with LOI-CV, Korean form of SCL-90-R which had been proved its reliability and validity, were administered to the all subjects for examining of concurrent validity. And then we examined whether this scale discriminates between obsessive patients, psychiatric controls and normal controls in the level of obsessive symptoms. Results : Test-retest reliability, internal consistency were very satisfactory. Concurrent validity with SCL-90-R was moderate level. And obsessive patients was scored significantly higher than psychiatric and normal controls in the level of obsessive symptoms. In factor analysis, items are clustered to 5 factors. In the global obsessive symptom, obsessive scores of female elimentary school students were higher than that of male students. Conclusions : These results indicate that the Korean form of LOI-CV is reliable and valid self-rating scale to assess the obsessive-compulsive symptoms in Korean children and adolescents. Author suggests that future research is needed for Korean version standardization study in normal and clinic-refered population.