• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.8
• /
• pp.959-965
• /
• 1988

Zinc diffusion characteristics and its applicabilities have been studied using an open-tube system. Thermal decomposition of arsenide(As) at gallium arsenide(GaAs) wafer surface was well inhibited by using Ga: poly-GaAs: Zn compositon as a diffusion source. Junction depth was obtained as 4.6x10**7\ulcorner exp)-1.25/kT) where activation energy of diffusion was 1.25eV. From Boltzmann-matano analysis, it could be identified that concentration dependencies of Zn diffusivity well consisted with those of kick-out model. The ideality factor of p+-n junction formed by Zn diffusion was about 1.6 and infrared light intensity was linearly varied in the range of sixty folds. It is concluded frodm these results that Zn diffuses according to kick-out model, and open-tube method is applicable to compound semiconductor devices.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.218-223
• /
• 2001

The chemical-mechanical polishing process was carried out for 2"-dia. sapphire wafer grown by horizontalBridgman method on the urethane lapping pad with the silica sol. The polished wafer shows the full-width at halfmaximum of 200~400 arcsec in double-crystal X-ray diffraction, indicating that the slicing, grinding and lapping processes before the polishing process affected the crystalline structural property of the wafer surface by the mechanical residual stress. For the inclusion of surface treatments after chemical-mechanical polishing such as the thermal annealing at the temperature of $1,200^{\circ}C$for 4 hrs. and chemical etching, the crystalline quality was sigdicantly enhanced with the reduced full-width at half maximum up to 8.3 arcsec.arcsec.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.13-14
• /
• 2008

$Al_2O_3$ thin films were deposited on GaN (0001) by remote plasma atomic layer deposition (RPALD) technique using trimethylaluminum (TMA) precursor and oxygen radicals in the temperature range of 25 ~ $500^{\circ}C$. Growth rate per cycle was varied with substrate temperature from 1.8 $\breve{A}$/ cycle at $25^{\circ}C$ to 0.8 $\breve{A}$/cycle at $500^{\circ}C$. The chemical structure of the $Al_2O_3$ thin films was studied using X-ray photo electron spectroscopy (XPS). Excellent electrical properties of $Al_2O_3$/GaN MIS capacitor were grown at $300^{\circ}C$ process temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.776-780
• /
• 2015

In this paper, we have studied the effect of mechanical polishing to Ga-polar face for reducing the wafer bowing and strain in free-standing GaN. After the mechanical polishing to Ga-polar face, the bowing of the free-standing GaN substrate significantly decreased with increasing the size of diamond slurry, and eventually changed the bowing direction from concave to convex. Furthermore, the full width at half maximum (FWHM) of high-resolution X-ray diffraction (HR-XRD) were decreased, especially the FWHM of (1 0 2) reflection for $1.0{\mu}m$ size of diamond slurry was significantly decreased from 630 to 203 arcsec. In the case, we confirmed that the compressive strain in Ga-polar face was fully released by Raman measurement.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.68-70
• /
• 2019

본 논문은 8.1kW/L($132W/in^3$)의 전력밀도를 갖는 전기자동차(xEV)용 저전압 배터리 충전기(Low voltage DC-DC converter, LDC)를 위한 절연형 DC-DC컨버터의 설계 방법을 제안한다. 전체 부피 중 가장 큰 비중을 차지하는 자성체의 부피를 줄이기 위해 GaN소자를 채택하여 700kHz의 스위칭 주파수를 적용하였으며, GaN 스위치를 고주파에서 원활히 동작시키기 위한 게이트 드라이버를 직접 제작하였다. 또한 자속 상쇄 개념이 적용된 매트릭스 평면 변압기를 설계하여 적용함으로써 변압기의 부피를 크게 줄일 수 있었고, 8.1kW/L의 전력밀도를 달성하였다. 본 논문에서는 후보 토폴로지들의 비교를 통해 고 전력 밀도에 가장 적합한 토폴로지를 선정하였으며, 자속 상쇄 기법이 적용된 매트릭스 평면 변압기의 설계방법을 제안하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.2
• /
• pp.73-77
• /
• 2021

Ga-doped ZnO thin films by RF magnetron sputtering process were synthesized according to the deposition conditions of O2 and Ar atmosphere gases, and rapid heat treatment (RTA) was performed at 600℃ in an N2 atmosphere. The thickness of the deposited ZnO : Ga thin film was measured, the crystal phase was investigated by XRD pattern analysis, and the microstructure of the thin film was observed by FE-SEM and AFM images. The intensity of the (002) plane of the X-ray diffraction pattern showed a significant difference depending on the deposition conditions of the thin films formed by O2 and Ar atmosphere gas types. In the case of a single thin f ilm doped with Ga under O2 conditions, a strong diffraction peak was observed. Under O2 and Ar conditions, in the case of a multilayer thin film with Ga doping, only a peak on the (002) plane with a somewhat weak intensity was shown. In the FE-SEM image, it was observed that the grain size of the surface of the thin film slightly increased as the thickness increased. In the case of a multilayer thin film with Ga doping under O2 and Ar atmosphere conditions, the specific resistance was 6.4 × 10-4 Ω·cm. In the case of a single thin film with Ga doping under O2 atmosphere conditions, the resistance of the thin film decreased. The resistance decreased as the thickness of the Ga-doped ZnO thin film increased to 2 ㎛, showing relatively a low specific resistance of 1.0 × 10-3 Ω·cm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.308.2-308.2
• /
• 2014

최근 III-N계 물질 기반의 광 반도체 중 m-면 사파이어 기판을 사용하여 반극성 (11-22) GaN박막을 성장하는 광반도체의 발광효율을 높이려는 연구가 많이 진행되고 있다. 하지만, 반극성 (11-22) GaN와 m-면 사파이어 기판과의 큰 격자상수 차이와 결정학적 이방성의 차이에 의해 많은 결정 결함이 발생하게 된다. 이러한 결정결함들은 반극성 LED소자내에서 누설전류 및 비발광 재결합, 순방향전압 등의 소자특성을 저하시키는 큰 요인이 되기 때문에 고효율 발광소자를 제작함에 있어 어려움을 야기시킨다. 이러한, 반극성 LED 소자의 효율 향상을 위해 결함 분석에 대한 연구를 주를 이루고 있는 상황으로, n-GaN층에 Si도핑에 관한 연구가 진행되고 있다. 이미 극성과 비극성에서는 n-GaN층에 Si이 도핑이 증가될수록 결정질이 향상되고, 양자우물의 계면의 질도 향상 되었다는 보고가 있다. 본 연구에서는 반극성 (11-22) GaN 기반의 발광소자를 제작함에 있어 n-GaN 층의 도핑 농도 변화를 통한 반극성 GaN 박막의 결정성 및 전기적 특성 변화에 따른 LED소자의 전계 발광 특성에 대한 연구를 진행하였다. 금속유기화학증착법을 이용하여 m-면 사파이어 기판에 $2.0{\mu}m$두께의 반극성 (11-22) GaN 박막을 저온 GaN완충층이 존재하지 않는 고온 1단계 성장법을 기반으로 성장하였다.[3] 이후, $2.0{\mu}m$ 반극성 (11-22) GaN 박막 위에 $3.5{\mu}m$ 두께의 n-GaN 층을 성장시켰다. 이때, n-형 도펀트로 SiH4 가스를 4.9, 9.8, 19.6, 39.2 sccm으로 변화하여 성장하였다. 이 4가지 반극성 (11-22) n-GaN 템플릿을 이용하여 동일 구조의 InGaN/GaN 다중양자우물구조와 p-GaN을 성장하여 LED 구조를 제작하였다. X-선 ${\omega}$-rocking curve를 분석한 결과, 이러한 특성은 반극성 (11-22) n-GaN층의 Si 도핑농도 증가에 따라서 각 (0002), (11-20), (10-10) 면에서 결정 결함이 감소하고, 반극성 (11-22) n형 GaN템플릿을 이용하여 성장된 반극성 GaN계 LED소자는 20mA인가 시 도핑 농도 증가에 따라 9.2 V에서 5.8 V로 전압이 감소하였으며 역방향 전류에서도 누설전류가 감소함이 확인되었다. 또한, 전계 발광세기도 증가하였는데, 이는 반극성 n형 GaN박막의 실리콘 도핑농도 증가에 따라 하부 GaN층의 결정성이 향상과 더불어 광학적 특성이 향상되고, n형 GaN층의 전자 농도 및 이동도의 동시 증가에 따라 전기적 특성이 향상 됨에 따라 LED소자의 전계 발광 특성이 향상된 것으로 판단된다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.101-104
• /
• 2008

GaN films were grown on the vertical and horizontal reactors by the hydride vapour phase epitaxy (HVPE). The structural and optical characteristics of the GaN films were investigated depending on the reactor-type. GaN epilayers were characterized by double crystal X-ray diffraction (DC-XRD), transmission electron microscopy (TEM) and photoluminescence (PL). Surface defects of two kinds of the GaN films were revealed by the wet chemical etching method, using $H_3PO_4$ acid at $200^{\circ}C$ for 8 minutes. Hexagonal etch pits were analyzed by optical microscopy and SEM. Etch pit densities were calculated to be approximately $1.4{\times}10^7$ and $1.2{\times}10^6\;cm^{-2}$ for GaN layers grown on horizontal and vertical reactors, respectively. Those results show GaN grown in the vertical reactor having a better quality of optical properties and crystallinity than that in the horizontal reactor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.2
• /
• pp.54-60
• /
• 2010

Polymer-assisted deposition is a chemical solution route to high quality thin films. In this process, the polymer controls the viscosity and binds metal ions, resulting in a homogeneous distribution of metal precursors in the solution and the formation of crack-free and uniform films after thermal treatment. We review our recent effort to epitaxially grow metal-nitride thin films, such as hexagonal GaN, cubic TiN, AlN, NbN, and VN, mixed-nitride $Ti_{1-x}Al_xN$, ternary nitrides tetragonal $SrTiN_2$, $BaZrN_2$, and $BaHfN_2$, hexagonal $FeMoN_2$, and nanocomposite TiN-$BaZrN_2$.