• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.34-39
• /
• 2019

Current synthesis processes for titanium dioxide ($TiO_2$) nanoparticles require expensive precursors or templates as well as complex steps and long reaction times. In addition, these processes produce highly agglomerated nanoparticles. In this study, we demonstrate a simple and continuous approach to synthesize $TiO_2$ nanoparticles by a salt-assisted ultrasonic spray pyrolysis method. We also investigate the effect of salt content in a precursor solution on the morphology and size of synthesized products. The synthesized $TiO_2$ nanoparticles are systematically characterized by X-ray diffraction, transmission electron micrograph, and UV-Vis spectroscopy. These nanoparticles appear to have a single anatase phase and a uniform particle-size distribution with an average particle size of approximately 10 nm. By extrapolating the plots of the transformed Kubelka-Munk function versus the absorbed light energy, we determine that the energy band gap of the synthesized $TiO_2$ nanoparticles is 3.25 eV.

• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.100-104
• /
• 2014

Magnetite nanoparticles were prepared by co-precipitation method and then silica was coated onto the surface of $Fe_3O_4$ by hydrolysis of TEOS. The silica coated magnetite nanoparticles were characterized for its structural, microstructural, optical, vibrational and magnetic properties by X-ray diffraction analysis, Scanning electron microscopy, UV-visible spectroscopy, Infrared spectroscopy and Vibration sample magnetometer, respectively. XRD study confirmed the presence of $SiO_2$ on the surface of magnetite nanoparticles. SEM study indicated that with increase in TEOS content the particles become bigger and mono-disperse. It was also found that the silica coating prevents magnetic particles from aggregation and imparts excellent stability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.13-17
• /
• 2002

Ga$_2$O$_3$ nanomaterials were synthesized from mechanically ground GaN powders with thermal annealing Ga$_2$O$_3$ nanobelts were farmed in a nitrogen atmosphere, while Ga$_2$O$_3$ nanoparticles were formed inan oxygen atmosphere. The structural properties of the Ga$_2$O$_3$ nanomaterials were investigated by X-ray diffractometer (XRD) and high-resolution transmission eleotron microscope (HRTEM). The study of field emission scanning electron microscopy (FESEM) on the microstructures of nanomaterials revealed that the nanobelts are with the range of about 10∼200nm width and 10∼50nm thickness, and that nanoparticles are with the range of about 20∼50nm radius. On the basis of XRD and HRTEM data, we determined that the nanobelts grow toward a direction perpendicular to the (010) lattice plane and that they are enclosed by facets of the (10T) and (101) lattice planes. The formation of the nanobelts may be described by the vapor-solid(VS) mechanism, and the supersaturation device of gaseous phase may play an important role in the formation of Ga$_2$O$_3$ nanomaterials.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.747-752
• /
• 2019

Environmental pollution remains a considerable health risk source all over the world; however, hazards are usually higher in developing countries. Iraq has long been suffering from the problem of pollution and how to treat pollution. Photocatalytic degradation has turned out to be most productive process for dye degradation. In this investigation, Rhodamine B (RhB), dye has been selected for degradation under visible light illumination. To address this issue, we fabricate erbium trioxide nanoparticles (Er₂O₃/NPs). Erbium trioxide nanoparticles are prepared and utilized for photo-catalytic degradation. The characterization of Er₂O₃/NPs is described and confirmed by utilizing of XRD (X-ray diffraction) and SEM (Scanning Electron Microscopy). The average size of Er₂O₃ nanoparticles is observed to be 16.00 nm. Er₂O₃/NPs is investigated for its ability of photo-catalytic degradation through certain selected parameters such as concentration and time. The methodological results show that the synthesized Er₂O₃/NPs is a good photo-catalytic for Rhodamine degradation.

• Advances in nano research
• /
• v.10 no.3
• /
• pp.295-312
• /
• 2021

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2016

Sewage treatment using microorganisms is affected by multiple factors such as microbial properties, characteristics of sewage and operating conditions, and nanoparticles inflow may cause negative effects on sewage treatment system especially on the system stability and efficiency. It was studied to assess the toxic effects of nanoparticles on microorganism growth. The activated sludge in the sewage treatment plant of university was cultured in the optimized medium for each strain. Bacillus (gram-positive), Pseudomonas and E.coli (gram-negative) in the activated sludge were selected as target microorganisms, and ZnO and $TiO_2$ were chosen as nanoparticles. For same concentration of nanoparticles, average growth inhibition rate of Bacillus was 60% or more, while that of Pseudomonas was less than 10%. The toxicity of nanoparticles was shown to be higher for gram-positive bacteria than gram-negative bacteria because of their differences on structure of cell wall, components of cell wall protein, physiology of cells and metabolism. ZnO affected 3 times more negative on the growth of microorganisms as compared to $TiO_2$. It was assumed that, therefore, toxicity of ZnO was found to be greater than $TiO_2$.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.

• Composites Research
• /
• v.35 no.4
• /
• pp.298-302
• /
• 2022

Owing to the superior optoelectronic properties, halide perovskites have emerged as next-generation materials for display application. In this study, we reported a novel route for CsPbBr₃ calcination into porous SiO₂ nanoparticles to overcome the stability issues of halide perovskite via a spatial confinement of crystal growth within SiO₂ pores. The resulting CsPbBr₃-SiO₂ nanoparticles exhibited the photoluminescence (PL) emission peak at 515 nm under optimal calcination condition. In several polar solvents, PL properties of CsPbBr₃-SiO₂ nanoparticles was maintained owing to the enclosed pores during calcination process, suggesting their promising application for display color conversion film.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.12-18
• /
• 2018

Cost-effective functional phosphor nanoparticles are prepared by introducing low-cost $SiO_2$ spheres to rare-earth phosphor ($YVO_4:Eu^{3+}$, $YVO_4:Er^{3+}$, and $YVO_4:Nd^{3+}$) shells using a sol-gel synthetic method. These functional nanoparticles are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and general photoluminescence spectra. The $SiO_2$ sphere occupying the interior of the conventional phosphor is advantageous in significantly reducing the cost of expensive rare-earth phosphor nanoparticles. The sol-gel process facilitates the core-shell structure formation; the rare-earth shell phosphor has strong interactions with chelating agents on the surfaces of $SiO_2$ nanoparticles and thus forms layers of several nanometers in thickness. The photoluminescence wavelength is simply tuned by replacing the active materials of $Eu^{3+}$, $Er^{3+}$, and $Nd^{3+}$. Moreover, the photoluminescent properties of the core-shell nanoparticles can be optimized by manipulating the specific contents of active materials in the phosphors. Our simple approach substitutes low-cost $SiO_2$ for expensive rare-earth-based phosphor materials to realize cost-effective phosphor nanoparticles for various applications.

• Coupled systems mechanics
• /
• v.9 no.3
• /
• pp.281-287
• /
• 2020

Nanotechnology is an upcoming technology that can provide solution for combating pollution by controlling shape and size of materials at the nanoscale. This review provides comprehensive information regarding the role of nanotechnology in pollution control at concrete structures. Titanium dioxide (TiO2) nanoparticles are a good item for concrete structures for diminishing the air polluting affect by gasses of exhaust. In this article, the mixture rule is presented for the effect of nanoparticles in environmental pollution reduction in concrete structures. The compressive strength, elastic modulus and reduction of steel bars in the concrete structures are studied. The Results show that TiO2 nanoparticles have significant effect on the reduction of environmental pollution and increase of stiffness in the concrete structures. In addition, the nanoparticles can reduce the use of steel bars in the concrete structure.