• 전자공학회논문지SC
• /
• 제45권3호
• /
• pp.32-41
• /
• 2008

본 논문에서는 blu-ray 디스크 드라이버의 트랙킹 서보시스템에 대하여 플랜트와 제어기의 불확실성을 보상하는 견실비약성 $H^{\infty}$ 상태궤환 제어기 설계방법을 제안한다. 플랜트와 제어기의 불확실성을 매개변수화 선형행렬부등식(PLMI: parameterized linear matrix inequality)을 이용하여 구조화된 불확실성의 형태로 표현하며, Lyapunov 함수를 이용하여 구조적인 제어기의 이득섭동을 고려한 견실비약성 $H^{\infty}$ 상태궤환 제어기가 존재할 충분조건 및 제어기 설계방법을 PLMI의 형태로 제안한다. 또한, 완화기법(relaxation technique)을 통하여 PLMI를 유한개의 LMI의 형태로 변환하여 견실하고 최적화된 제어기 이득과 제어기 섭동 범위를 계산하고, 모의실험을 통해서 제시된 제어기의 타당성 및 견실성(robustness)과 비약성(non-fragility)을 검증한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.673-678
• /
• 2001

This paper proposes a new type of piezoactuator-driven valve system. The piezoceramic actuator bonded to both sides of a flexible beam surface makes a movement required to control the pressure at the flapper-nozzle of a pneumatic valve system. After establishing a dynamic model, an appropriate size of the valve system is designed and manufactured. Subsequently, a robust $H_{\infty}$ control algorithm is formulated in order to achieve accurate tracking control of the desired pressure. The controller is experimentally realized and control performance for the sinusoidal pressure trajectory is presented in time domain. The control bandwidth of the valve system, which directly represents the fastness, is also evaluated in the frequency domain.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.515-520
• /
• 2001

Due to the high power to weight ratio and fast response under heavy load, the hydraulic systems are still applied to the development of many industrial facilities such as heavy duty construction vehicles, aerospace/military weapon actuating systems and motion simulators. Unlike the other actuators, single-rod hydraulic cylinder exhibits a lot different dynamic characteristics between the extending and retracting stroke because of the difference in pressure acting areas. In this research, in order to overcome this nonlinear feature, $H_{\infty}$ optimal controller was designed and implemented with DSP board that was specifically developed for the experiment. From the experimental result, we could confirm that the overall performance of single-rod hydraulic servo system is similar with the results as we expected in the design stage.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1171-1179
• /
• 2012

본 논문에서는 선박운동제어를 위한 제어시스템 설계문제에 대해 고찰한다. 특히 강인한 추종성능을 가진 2자유도 서보계 설계법을 이용하여 선박의 위치 및 자세제어를 위한 제어기를 설계하고, 실험 등의 실제적인 제어시스템 구축시 센서로부터 모든 정보를 획득할 수 없으므로 이에 필요한 상태를 추정하기 위한 관측기 설계 문제에 대해 고려하고 있다. 그래서 본 논문에서는 실제 상태정보와 추정된 상태정보와의 오차를 최소화하도록 $H_{\infty}$ 오차 바운드를 설정하는 기법으로 관측기의 이득을 구한다. 특히 $H_{\infty}$ 오차 바운드를 만족하는 관측기가 존재하기 위한 조건을 LMI형식으로 변환하여 표현함으로써 관측기 이득 계산을 효율적으로 수행하여 최적의 이득을 구할 수 있음을 보이고 시뮬레이션을 통해 그 유용성을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1040-1043
• /
• 1996

The accuracy of the servo control in CNC system has a great influence on the duality of machine product. Tracking performance of the servo control is deteriorated mainly by the time delay of the servo system and the inertia of the work table or bed. Contouring errors occur in every interpolation steps by the effect of the tracking performance. In this paper, $H_{\infty}$ two-degree-of-freedom(TDF) controller is designed for improvement to improve the tracking performance. The designed controller is applied 3-axis machining center model and the cutting accuracy is simulated in case of corner cutting, circular and involute interpolation. Simulation results show that $H_{\infty}$ TDF controller designed in this paper has a good effect to improve tracking performance in CNC system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.323-326
• /
• 2003

본 논문에서는 PID 제어기를 이용해 외란제거를 함은 물론 최적 제어가 될 수 있는 파라메터를 유전자 알고리즘을 통해 구하는 방법을 제안하였다. 외란제거를 위해 $H_\infty$-norm을 응용하여 제어시스템의 외란 제거 조건들을 제시하고 이 조건들을 만족하는 PID 제어기를 설계하였다. 설계된 PID제어기의 최적 파라메터를 구하기 위해 유전자 알고리즘을 이용하였고 최적 파라메터를 평가하기 위하여 ITSE(Integral of time weighted squared error)성능지수를 이용하였다. 위의 설계 기법들을 서보모터의 제어에 적용하여 만족할 만한 결과를 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.541-546
• /
• 2005

In this paper, the various uncertainties, which are generated in working of an optical disk drive, are discussed in details and the robust servo design considering the uncertainties are discussed. First, the classification of the uncertainties and the modeling process including that are treated. Then, the robust servo designs using QFT and $H_{\infty}$ theory are performed. Finally, the designed servo loops realized by DSP are applied to the real system. From these experiments, we proved that the robust servo design using QFT and $H_{\infty}$ have a good performance and a good robust stability when it compared with the conventional servo loop.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.119-124
• /
• 1996

Recently, high speed optical disk drives are increasingly demanded to read or write data fastly enough. To this end, both structure and controller designs of their optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design method named H$_{\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulation are performed to demonstrate the controller robustness with appropriate performance specifications being satisfied..

• 소음진동
• /
• 제6권4호
• /
• pp.521-528
• /
• 1996

Recently, higher speed optical disk drives including computer CD-ROM drives tend to be increasingly demanded to read or write the enormous volume of digital data. To this end, both structure and controller designs of the optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design namedH${\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulations are performed to demonstrate the robustness with appropriate performance specifications being satisfied. In addition, as the implementation issue of it, procedures of temporal discretization as well as model reduction of the controller are also addressed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.306-312
• /
• 1996

The performance of the failure detection algorithm may be greatly influenced by the model uncertainty. It is very important to design a robust failure detection system to the model uncertainty. In this paper, a design procedure to generate failure detection algorithm is proposed. The design procedure suggested is based on the concept of the‘threshold selector［1］’. The H$\infty$ control algorithm is used to derive a threshold selector which is robust to the model uncertainty, The threshold selector derived can be used to develop a failure detection system together with the weighted cumulative sum algorithm［3］. Computer simulation study showed that the failure detection system designed for an ISA(Integrated Servo Actuator) system by using the proposed method is robust to the model uncertainty.