• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.426-429
• /
• 1997

This paper proposes a robust H$_{\infty}$ tracking filter to improve the unacceptable target tracking performance for systems with parameter uncertainties. Also, we use here the input estimation approach to account for the possibility of maneuver. Simulation results show that the robust H$_{\infty}$ tracking filter which is proposed here to solve the systems with all system parameter uncertainties, has a good tracking performance for a maneuvering target tracking problem.m.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.332-335
• /
• 1997

In the industrial motor drive system, a shift torsional vibration si often generated when a motor and a load are connected with a flexible shaft. This paper treats the vibration suppression control of such a system. In this paper, the state feedback controller of the two-mass resonant system using the H$\infty$ filter is proposed. The H$\infty$ filter is robust in noise and disturbance. Simulation results show the validity proposed controller.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.38-45
• /
• 1999

본 논문에서는, $H_{\infty}-LTR$ 설계의 새로운 접근방법을 제시한다. 제시된 방법은 제어입력의 크기 및 회복오차의 적절한 가중을 조절할 수 있는 설계도구를 제공한다. 1단계에서, 요구되는 성능사양에 만족하도록 루프를 정형하기 위하여 Kalman 필터를 설계하고, 설계된 Kalman 필터는 플랜트의 전달함수와 함께 목표전달함수(target transfor function)로 사용된다. 2단계에서는 목표전달함수로 회복을 위하여 감도함수를 가중함수로 상요한 준 최적 $H_{\infty}_LTR$을 설계한다. 시뮬레이션을 통하여 LQG/LTR, $H_{\infty}-LTR$ 방법의 경과를 비교함으로써 제시된 $H_{\}-LTR$의 우수성을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.351-353
• /
• 2006

In this paper, we present the traditional GPS Position- Velocity (PV) model to apply for both Discrete-Time Kalman Filter and Discrete-Time $H_{\infty}$ Filter. The positioning algorithms of both filters are proposed for a stand-alone low-cost GPS module to increase its accuracy. For disturbance cancellation, the Kalman Filter requires the statistical information about process and measurement noises while the $H_{\infty}$ Filter only requires that these noises are bounded. Experiments show that with the same measurement data, $H_{\infty}$ Filter gives us better positioning results compared with Least-Squared method and Kalman Filter.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1796-1801
• /
• 2009

This paper is concerned with the problem of delay-dependent robust $H_{\infty}$ filtering for uncertain descriptor systems with time-varying delay. The considering uncertainty is convex compact set of polytoic type. The purpose is the design of a linear filter such that the resulting filtering error descriptor system is regular, impulse-free, and asymptotically stable with $H_{\infty}$ norm bound. By establishing a finite sum inequality based on quadratic terms, a new delay-dependent bounded real lemma (BRL) for delayed descriptor systems is derived. Based on the derived BRL, a robust $H_{\infty}$ filter is designed in terms of linear matrix inequaltity (LMI). Numerical examples are given to illustrate the effectiveness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.750-753
• /
• 1998

This paper gives a simple parameterization of all stable unbiased filters to solve the suboptimal mixed $H_2/H_{\infty}$ filtering problem. Using the central filter, mixed $H_2/H_{\infty}$ filter is designed which minimizes the upper bound for the $H_2$ norm of the transfer matrix from a white noise to the estimation error subject to an $H_{\infty}$ norm constraint on the transfer matrix from an energy-bounded noise to the estimation error. The problem of finding suitable estimator gain can be converted into a convex optimization problem involving linear matrix inequalities.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2589-2592
• /
• 2003

In this paper, a robust mixed H$_2$/H$\_$$\infty$/ output feedback control method is applied to the design of loop filter for PLL carrier phase tracking. The proposed method successfully copes with large S-curve slope uncertainty and a significant decision delay in the closed-loop that may exist In modern receivers due to a convolutional decoder or an equalizer. The objective is to design an output feedback controller which minimizes the H$_2$performance while satisfying the H$\_$$\infty$/ performance to guarantee the gain margin and phase margin for linear time invariant(LTI) polytopic uncertain systems. LMIs based approach is given to solve this problem. We can verify the H$\_$$\infty$/ performance satisfaction and minimize the phase detector error through the simulation result.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.145-155
• /
• 1998

An $H{\infty}$ controller with a roll eccentricity filter is proposed to alleviate the effect of entry thickness variation and roll eccentricity occured in rolling stands themselves of tandem cold mills. A robust controller to the disturbances is designed by H$_{\infty}$ control techniques, which can reflect the input direction of disturbances and the knowledge of disturbance spectrum in the frequency domain. First, fundamental problems in tandem cold mills such as process transport delay inherent in the exit thickness measurement and the feedforward loading of roll eccentricity signals on the exit thickness be overcome by the roll eccentricity filtering and the compensation for the error of gaugemeter thickness estimator. And non-satndard $H{\infty}$ control problem caused by the selection of weighting function having poles on the $J{\omega}$-axis is discussed. The resultant controller composed by an $H{\infty}$ controller and an estimator for the roll eccentricity is evaluated through computer simulations. The effectiveness of the proposed control method is compared to that of the conventional LQ controller method and a feedforward controller for the roll eccentricity, which has been already studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1098-1100
• /
• 2001

In the industrial motor drive system which is composed of a motor and load connected with a flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission. To solve this problem, $H_{\infty}$ controller was designed. In this paper, $H_{\infty}$ control of 2-mass system using $H_{\infty}$ filter for compensating shaft torque is proposed. Pole-zero maps show the validity of proposed controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.571-574
• /
• 2003

This paper proposes a detection method for mechanically stuck control rod drive mechanism (CRDM) faults. During the normal operation of a CRDM, disturbance voltage is induced due to the change of the airgap flux between the stator and the armature of a CRDM. This disturbance voltage is estimated by using $H_\infty$ filtering method, and generalized plant is used in linear fractional transform (LFT) framework. $H_\infty$ filtering is described and solved in terms of linear matrix inequalities (LMIs). Simulation results are shown.