• 한국자기학회지
• /
• 제16권6호
• /
• pp.276-278
• /
• 2006

스위칭 특성을 향상시키기 위하여 비정질 강자성 CoFeSiB 자유층을 갖는 자기터널접합 (MTJ)의 스위칭 특성을 연구하였다. 자기터널접합의 구조는 $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(nm)$이다. CoFeSiB는 $560\;emu/cm^{3}$의 낮은 포화자화도와 $2800\;erg/cm^{3}$의 높은 이방성 상수를 가졌다. 이러한 특성이 자기터널접합의 낮은 보자력($H_{c}$)과 높은 자장민감도를 갖게 한다. 이것은 또한 Landau-Lisfschitz-Gilbert 방정식에 근거한 미세자기 전산시뮬레이션을 통하여 submicrometersized elements에서도 확인하였다. CoFeSiB 자유층 두께를 증가함으로서 스위칭 특성은 반자화 자기장의 증가로 인하여 더욱더 나빠졌다.

• 한국표면공학회지
• /
• 제37권6호
• /
• pp.319-325
• /
• 2004

Fe thin films containing Si particles were prepared on metallic substrates by electrodeposition method in sulfate solutions and the content of codeposited Si particles in the films was investigated as a function of applied current density, the content of Si particels in the solution, solution pH, solution temperature and concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film was not dependent on the applied current density, solution pH and solution temperature, while it was dependent on the content of Si particles in the solution and the concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film increased with increasing content of Si particles in the solution but reached a maximum value of about 6 wt% when the content of Si particles in the solution exceeds 100 g/l. On the other hand, the content of Si codeposited in the film increased up to about 17 wt% with decreasing concentration of $FeSO_4$$7H_2$O in the solution. These results would be applied to the fabrication of very thin Fe-6.5 wt% Si sheets for electrical applications.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권2호
• /
• pp.76-78
• /
• 2002

We have carried out the first-principle electronic structure calculations to investigate the spacer layer formation of Fe/Si multilayered films (MLF) and compared with the results obtained by optical spectroscopy. The computer-simulated spectra based on various structural models of MLF showed that neither FeSi$_2$ nor B2O-phase FeSi, which are semiconducting, could be considered as the spacer layers in the Fe/Si MLF for the strong antiferromagnetic coupling. The optical properties of the spacer extracted from the effective optical response of the MLF strongly support its metallic nature. The optical conductivity spectra of various phases of Fe-Si compounds were calculated and compared with the extracted optical properties of the spacer. From the above theoretical investigations it is concluded that a E2-phase metallic FeSi compound is spontaneously formed at the interfaces during deposition.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.341-348
• /
• 2019

This paper reports the microstructure and electrochemical properties of Si-Al-Fe ternary amorphous alloys prepared by rapid solidification as an anode for lithium secondary batteries. The microstructure was analyzed using XRD and HR-TEM with EDS mapping. In accordance with DSC analysis, annealing was performed to crystallize the active nano-Si in the amorphous alloy. Thus, nano-Si forms (~80 nm) embedded in the matrix alloy, such as $Fe_2Al_3Si_3$, $FeSi_2$, and $Fe_{0.42}Si_{2.67}$, were successfully synthesized. The electrode based on the Si-Al-Fe ternary alloy delivered an initial discharge capacity of approximately $700mAh^{g-1}$, and exhibited a high Coulombic efficiency of 99.0~99.6% from the $2^{nd}$ to $70^{th}$ cycles.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.210-214
• /
• 2013

This manuscript reports on compared color evolution about phase transformation of ${\alpha}-FeOOH@SiO_2$ and ${\beta}-FeOOH@SiO_2$ pigments. Prepared ${\alpha}$-FeOOH and ${\beta}$-FeOOH were coated with silica for enhancing thermal properties and coloration of both samples. To study phase and color of ${\alpha}$-FeOOH and ${\beta}$-FeOOH, we prepared nano sized iron oxide hydroxide pigments which were coated with $SiO_2$ using tetraethylorthosilicate and cetyltrimethyl-ammonium bromide as a surface modifier. The silica-coated both samples were calcined at high temperatures (300, 700 and $1000^{\circ}C$) and characterized by scanning electron microscopy, CIE $L^*a^*b^*$ color parameter measurements, transmission electron microscopy and UV-vis spectroscopy. The yellow ${\alpha}$-FeOOH and ${\beta}$-FeOOH was transformed to ${\alpha}-Fe_2O_3$ with red, brown at 300, $700^{\circ}C$, respectively.

• 한국자기학회지
• /
• 제16권6호
• /
• pp.279-282
• /
• 2006

비정질 강자성 NiFeSiB 자유층을 갖는 자기터널접합 (MTJ)에 대하여 연구하였다. 비정질 자유층이 MTJ의 스위칭 특성에 미치는 영향을 알아보는데 역점을 두어 기존의 CoFe와 NiFe층 대신에 NiFeSiB 자성층을 사용하였다. $Ni_{16}Fe_{62}Si_{8}B_{14}$는 $Co_{90}Fe_{10}$보다 더 낮은 포화자화도 ($M_{s}:\;800\;emu/cm^{3}$) 그리고 $Ni_{80}Fe_{20}$보다 더 높은 이방성 상수 ($K_{u}:\;2700\;erg/cm^{3}$)를 갖는다. $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(nm)$ 구조는 그 자체의 낮은 포화자화도와 높은 일축 이방성을 가짐으로 인하여 보자력($H_{c}$)을 감소시키고 스위칭 각형을 증가시키게 함으로서 MTJ의 스위칭 특성에 유리한 것으로 조사되었다. 더욱이 미소두께(1 nm)의 CoFe층을 터널장벽/NiFeSiB 경계면에 삽입하면 TMR비와 스위칭 각형이 증가하고 개선되었다.

• 한국자기학회지
• /
• 제23권4호
• /
• pp.117-121
• /
• 2013

본 연구에서는 대표적인 강자성 금속인 Fe에 비자성 원소가 치환된 비교적 단순한 B2 구조의 FeX(X = Al, Si, Ni, Ga, Ge, Sn) 합금의 자기변형계수를 제일원리계산으로 수행하여 Fe 기반 합금이 희토류 원소 기반 자기변형 물질인 Terfenol을 대체할 수 있는 가능성을 탐색하였다. 계산방법으로 자성 연구에 가장 적합한 것으로 알려져 있는 총퍼텐셜 선형보강 평면파(Full-potential Linearized Augmented Plane Wave; FLAPW) 방법을 사용하였으며 일반화 물매근사(generalized gradient approximation: GGA)을 도입하여 전자 상호간의 교환-상관 퍼텐셜을 기술하였다. B2 구조의 FeX(X = Al, Si, Ni, Ga, Ge, Sn)의 합금들 중에 FeSi와 FeGe은 비자성 상태가, 그 외 나머지 합금은 강자성 상태가 안정된 것으로 계산되었다. FeAl, FeNi, FeGa, FeSn의 자기변형계수 는 각각 -5, +6, -84, -522ppm으로 계산되어 FeSn은 큰 자기변형을 가질 수도 있음을 예측하였다.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.56-61
• /
• 1999

The plastic deformation behaviors for powder extrusion of rapidly soildified Al-Si-Fe alloys at high temperature were investigated. During extrusion of Al-Si-Fe alloys, primary Si and intermetallic compound in matrix are broken finely. Additionally, during extrusion metastable $\delta$ phase($Al_4SiFe_2$) intermetallic compound disappears and the equilibrium $\beta$ phase($Al_5FeSi_2$) is formed. In gereral, it was diffcult to establish optimum process variables for extrusion condition through experimentation, because this was costly and time-consuming. In this paper, in order to overcome these problems, we compared the experimental results to the finite element analysis for extrusion behaviors of rapidly solidified Al-Si-Fe alloys. This ingormation is expected to assist in improving rapidly solidified Al-Si alloys extrusion operations.

• Applied Microscopy
• /
• 제25권3호
• /
• pp.90-98
• /
• 1995

In the Fe-Si system, a mixture of a($Fe_{2}Si_5$) - and ${\epsilon}$(FeSi)-composition powders was sintered and heat-treated subsequently at various temperatures and time to get thermoelectric ${\beta}$-phase($FeSi_2$) compacts. The different transformational sequences depending on the heat treating temperature were found through the investigation into phase transformation and microstructural development. That is, a rapid eutectoid decomposition of ${\alpha}{\to}{\beta}+Si$ occurred together with a accompanying slow reaction between the dispersed Si formed by above decomposition and the preexisted ${\epsilon}$ phase at temperatures below $830^{\circ}C$. The unreacted Si and the micropores formed due to the density change upon the transformation coarsened as heat treating time elapsed. At temperatures above $880^{\circ}C$, however, transformation was proceeded by a peritectoid reaction of ${\alpha}+{\epsilon}{\to}{\beta}$. It took at least 200min. to achieve 90% volume fracion of transformed ${\beta}$ phase, and the growth of micro-pores was also observed in this transformational sequence with prolonged heat treating time.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2567-2573
• /
• 2012

We successfully synthesized $Fe_3O_4@SiO_2$ nanoparticles with ultrathin silica layer of $1.0{\pm}0.5$ nm that polyethyleneimine (PEI) with low molecular weight of 2.0-4.0 kDa was covalently conjugated with the resulting $Fe_3O_4@SiO_2$ nanoparticles by silane coupling reaction. The PEI-$Fe_3O_4@SiO_2$ nanoparticles were further used as gene delivery vector for a human fibroblast cell (IMR-90) line. Gene transfection efficiency of the PEI-$Fe_3O_4@SiO_2$ complexes did not increase remarkably after magnetofection; however, the addition of Lipofectamine 2000 significantly increased the transfection efficiency of the PEI-$Fe_3O_4@SiO_2$ complexes. We believe that the present approach could be utilized for magnetofection as alternative to $Fe_3O_4$ nanoparticles conjugated with the PEI of high molecular weight thanks to its relatively low cytotoxicity and high transfection efficiency.