• Journal of Korea Foundry Society
• /
• v.41 no.1
• /
• pp.3-10
• /
• 2021

In the compound casting between the aluminum alloy and the cast iron, the iron component may be dissolved from the cast iron during the process and mixed into the aluminum melt, thereby forming various iron-containing intermetallic compounds and significantly deteriorating the tensile properties of the aluminum alloy. On the other hand, unlike Fe, which is added as an impurity, Cu is added to improve the mechanical properties of the aluminum alloy. In this study, the change in microstructure and tensile properties of aluminum alloys due to the addition of Fe and Cu was investigated. A large amount of iron-containing compounds such as coarse Al₅FeSi phases were formed when the iron content was 1% or more, and the tensile properties were significantly reduced. In the case of the aluminum alloy to which Cu was added, an Al₂Cu phase was additionally formed and the tensile strength was clearly improved.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.467-471
• /
• 2011

Spin exchange interactions of $(C_2N_2H_{10})[Fe(HPO_3)F_3]$ were examined by performing a spin dimer analysis based on extended Huckel tight binding method and a mapping analysis based on first principles density functional theory. Spin exchange interactions occur through the super-superexchange paths $J_1$ and $J_2$ in $(C_2N_2H_{10})[Fe(HPO_3)F_3]$. In the super-superexchange path $J_2$ magnetic orbital interactions between eg-block levels are much stronger than those from $t_{2g}$-block levels. Both electronic structure calculations show that the spin exchange interaction through the super-superexchange path $J_2$ is much stronger than that of $J_1$.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.406-410
• /
• 1992

본 논문에서는 MgFe$_{2}$O$_{4}$ 세라믹스의 구조적 특성을 개선하기 위하여 TiO$_{2}$를 0-10[wt%] 첨가하여 세라믹스를 만들고 TiO$_{2}$가 습도센서용 MgFe$_{2}$O$_{4}$ 세라믹스의 구조적 특성에 미치는 영향을 조사하였다. 각 시편은 TiO$_{2}$가 첨가되는 양이 증대함에 따라 NgTi$_{2}$O$_{5}$의 이상이 나타났다. TiO$_{2}$의 첨가량이 6[wt%]일 때 까지는 시편의 밀도가 증가하여 기공율의 저하를 가져왔고 기공의 크기가 최소가 되는 조성은 5[wt%]의 TiO$_{2}$가 첨가되었을 때이며 이때의 평균 기공의 크기는 1615[.angs.]이었다. 따라서 5[wt%]의 TiO$_{2}$를 첨가했을 때가 기공의 크기 조절에 최적이라고 생각되며 센서용 기판으로 응용하기 적합하다고 생각된다.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.481-486
• /
• 2019

Iron oxides currently attract considerable attention due to their potential applications in the fields of lithiumion batteries, bio-medical sensors, and hyperthermia therapy materials. Magnetite (Fe₃O₄) is a particularly interesting research target due to its low cost, good biocompatibility, outstanding stability in physiological conditions. Hydrothermal synthesis is one of several liquid-phase synthesis methods with water or an aqueous solution under high pressure and high temperature. This paper reports the growth of magnetic Fe₃O₄ particles from iron powder (spherical, <10 ㎛) through an alkaline hydrothermal process under the following conditions: (1) Different KOH molar concentrations and (2) different synthesis time for each KOH molar concentrations. The optimal condition for the synthesis of Fe₃O₄ using Fe powders is hydrothermal oxidation with 6.25 M KOH for 48 h, resulting in 89.2 emu/g of saturation magnetization at room temperature. The structure and morphologies of the synthesized particles are characterized by X-ray diffraction (XRD, 2θ = 20°-80°) with Cu-kα radiation and field emission scanning electron microscopy (FE-SEM), respectively. The magnetic properties of magnetite samples are investigated using a vibrating sample magnetometer (VSM). The role of KOH in the formation of magnetite octahedron is observed.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.24-31
• /
• 1995

Gas sensing element, $\alpha-Fe_2O_3$ was synthesized by dehydration, reduction, and oxidation of $\alpha-FeOOH$, which was synthesized with $FeSO_4\cdot 7H_2O$ and NaOH. They were produced as a bulk-type, a thick film-type. Then, their responses and mechanisms of response to the gas of carbon monoxide were studied. The qualities of gas sefising elements are decided by the structure and the relative surface area. In the process of $\alpha-FeOOH$ synthesis, the effects of reaction conditions as the equivalent ratio, on the structure and the relative surface area of gas sensing element were observed. The changes of the structure were measured with XRD, SEM,TG-DTA and BET. The resistance changes of the synthesized gas sensor in the air were measured. The response ratio were also measured for the changes of working temperature and gas concentration. As a result of analysis with XRD, it was confirmed that the the best conditions for the synthesis of $\alpha-FeOOH$ were equivalent ratio 0.65. The thick film-type element of $\gamma-Fe_2O_3$ responded more quickly than the bulk-type did. The structure and the relative surface area of the $\rho-FeOOH$ were confirmed as the important factors deciding gas response charcteristics.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.1-5
• /
• 1998

Acicular Fe-Co alloy particles are one of the candidates for high-density magnetic recording media. We examined the effects of Co additions on the magnetic properties of Fe-Co alloy particles by using M$\'{o}$ssbauer spectroscopy, TEM, and X-ray diffraction. Acicular $Fe_n$Co (n=5, 4, 3, 2) alloy particles coated with silica, were prepared by a chemical coprecipitation method and subsequent H $_2$ reduction. The crystal structure was found to be cubic in all n ranges. The lattice constant $a_0$ decreases with increasing Co contents. Analysis of $^{57}Fe$ M\'{o}$ssbauer effect data in terms of the local configurations of Co atoms has permitted the influence of magnetic hyperfine interactions to be monitored.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.65-71
• /
• 2010

In this study, the effect of Sn and Mg on microstructure and mechanical properties of Cu-Fe-P alloy were investigated by using scanning electron microscope, transmission electron microscope, tensile strength, electrical conductivity, thermal softening, size and distribution of the precipitation phases in order to satisfy characteristic for lead frame material. It was observed that Cu-0.14wt%Fe-0.03wt%P-0.05wt%Si-0.1wt%Zn with Sn and Mg indicates increasing tensile strength compare with PMC90 since Sn restrained the growth of the Fe-P precipitation phase on the matrix. However, the electrical conductivity was decreased by adding addition of Sn and Mg because Sn was dispersed on the matrix and restrained the growth of the Fe-P precipitation. The size of 100 nm $Mg_3P_2$ precipitation phase was observed having lattice parameter $a:12.01{\AA}$ such that [111] zone axis. According to the results of the study, the tensile strength and the electrical conductivity satisfied the requirements of lead frame; so, there is the possibility of application as a substitution material for lead frame of Cu alloy.

• Korean Journal of Materials Research
• /
• v.32 no.8
• /
• pp.339-344
• /
• 2022

The lattice oxygen mechanism (LOM) is considered one of the promising approaches to overcome the sluggish oxygen evolution reaction (OER), bypassing -OOH^* coordination with a high energetic barrier. Activated lattice oxygen can participate in the OER as a reactant and enables O^*-O^* coupling for direct O₂ formation. However, such reaction kinetics inevitably include the generation of oxygen vacancies, which leads to structural degradation, and eventually shortens the lifetime of catalysts. Here, we demonstrate that Se incorporation significantly enhances OER performance and the stability of NiFe (oxy)hydroxide (NiFe) which follows the LOM pathway. In Se introduced NiFe (NiFeSe), Se forms not only metal-Se bonding but also Se-oxygen bonding by replacing oxygen sites and metal sites, respectively. As a result, transition metals show reduced valence states while oxygen shows less reduced valence states (O^-/O₂^2-) which is a clear evidence of lattice oxygen activation. By virtue of its electronic structure modulation, NiFeSe shows enhanced OER activity and long-term stability with robust active lattice oxygen compared to NiFe.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.81.2-81.2
• /
• 2008

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.61-64
• /
• 2007

Fe-PC와 Fe-TCPC를 합성하여 암모니아 탈착에 따른 촉매의 특성과 황화합물 및 아민류의 흡착실험을 수행하여 다음과 같은 결론을 얻었다. 1) FT-IR로 분석한 결과, Fe-TCPC는 Fe-PC에 비해 카르복실기의 특성 스펙트럼이 관찰되었고, SEM/EDS로 관찰한 결과 카르복실기의 영향으로 Fe의 비율이 낮고 산소의 량은 높게 나타났으므로 표면에 카르복실기가 존재하고 있음을 알 수 있었다. 2) TPD 실험에서 철 프탈로시아닌 유도체는 두 개의 피크가 저온부와 고온부에서 나타나 약산점과 강산점이 존재하고 있음을 확인 할 수 있었으며, 탈착량은 Fe-TCPC가 Fe-PC보다 고온부에서 강산량점량이 많았고 저온부에서 약산점량은 적게 나타난 것으로 보아 Fe-TCPC가 표면에 카르복실기의 화학적흡착 영향으로 강산점에서 많은 탈착이 일어났음을 의미한다. 3) Fe-TCPC는 Fe-PC보다 비표면적과 세공부피가 많았고, 과산화수소의 분해효율이 높아 촉매적 성질이 우수하였으며, 또한 입자의 크기도 작았음을 확인하였다. 이는 모든 조건에서 Fe-TCPC가 Fe-PC보다 흡착능력이 우수한 것으로 예측된다. 4)카르복실기가 치환된 철 프탈로시아닌 유도체의 제거효율은 아민화합물이 우수하지만 황화합물에서 다소 낮게 나타났다. 이 결과로 보아 아민류에 효과가 있는 카르복실 철 프탈로시아닌을 착색제로 사용하면 탈취 기능을 가진 안료가 될 것으로 생각된다.