• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.138-145
• /
• 2014

Cobalt-Chromium (Co-Cr) alloys are classified as predominantly base-metal alloys and are widely known for their biomedical applications in the orthopedic and dental fields. In dentistry, Co-Cr alloys are commonly used for the fabrication of metallic frameworks of removable partial dentures and recently have been used as metallic substructures for the fabrication of porcelain-fused-to-metal restorations and implant frameworks. The increased worldwide interest in utilizing Co-Cr alloys for dental applications is related to their low cost and adequate physico-mechanical properties. Additionally, among base-metal alloys, Co-Cr alloys are used more frequently in many countries to replace Nickel-Chromium (Ni-Cr) alloys. This is mainly due to the increased concern regarding the toxic effects of Ni on the human body when alloys containing Ni are exposed to the oral cavity. This review article describes dental applications, metallurgical characterization, and physico-mechanical properties of Co-Cr alloys and also addresses their clinical and laboratory behavior in relation to those properties.

• 한국자기학회지
• /
• 제20권1호
• /
• pp.8-12
• /
• 2010

$NiFeCr/(Cu/Co_{90}Fe_{10}){\times}N/NiFeCr$ 다층박막의 자기변형과 응력에 관하여 연구하였다. Cu $15{\AA}$/CoFe $15{\AA}$ 이중층의 수가 증가할수록 포화자기변형상수가 2층에서 $-5.6\times10^{-6}$로부터 20층에서 $-8.5\times10^{-6}$으로 감소하였다. CoFe층의 두께가 10에서 $20{\AA}$으로 증가되었을 때 포화자기변형상수의 크기가 약 $1\times10^{-6}$ 만큼 감소하였다. Cu $15{\AA}$/CoFe $15{\AA}$ 이중층의 층수가 2에서 20으로 증가 되었을때 다층박막의 인장응력의 크기가 980 MPa에서 590 MPa로 감소하였다. 자기변형과 박막의 응력으로부터 형성될 수 있는 최대 자기변형이방성자장은 Cu $15{\AA}$/CoFe $15{\AA}$ 이중층의 수가 10일 때 135.7 Oe 이었다.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.153-160
• /
• 2011

The AISI 216L stainless steel with a composition of Fe-16Cr-6Ni-6Mn-1.7Mo (wt.%) was oxidized at $700{\sim}900^{\circ}C$ in air for 100 h. At $700^{\circ}C$, a thin $Mn_{1.5}Cr_{1.5}O_4$ oxide layer with a thickness of $0.4{\mu}m$ formed. At $800^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $FeCr_2O_4$ oxide layer with a total thickness of $30{\mu}m$ formed. The non-adherent scale formed at $800^{\circ}C$ was susceptible to cracking. At $900^{\circ}C$, an outer thin $Fe_2O_3$ oxide layer and a thick inner $Mn_{1.5}Cr_{1.5}O_4$ oxide layer formed, whose total thickness was $10{\sim}15{\mu}m$. The scales formed at $900^{\circ}C$ were non-adherent and susceptible to cracking. 216 L stainless steel oxidized faster than 316 L stainless steel, owing to the increment of the Mn content and the decrement of Ni content.

• 공업화학
• /
• 제26권4호
• /
• pp.477-482
• /
• 2015

본 연구에서는 순환골재와 순환골재/제강슬래그 조합을 이용하여 수용액상에서 $Cr^{6+}$과 $As^{3+}$ 흡착 특성을 평가하였다. 순환골재와 제강슬래그의 주요 성분(CaO, $SiO_2$, $Al_2O_3$, $Fe_2O_3$)이 각각 91%와 86.9% 함유되어 흡착제로서 유리한 조성을 가지고 있다. 순환골재와 순환골재/제강슬래그 조합에 있어서 $Cr^{6+}$과 $As^{3+}$의 동역학적 평형은 각각 180 min과 360 min 이후에 도달하였다. 동적흡착결과를 유사 1차 모델과 유사 2차 모델로 분석한 결과 두 모델 모두 더딘 평형 결과를 나타냈다. 순환골재와 순환골재/제강슬래그 조합에 있어서, 평형흡착 실험은 Freundlich 모델에 잘 부합했고, $Cr^{6+}$보다 $As^{3+}$의 흡착량이 더 높았다. 용액의 pH가 6에서 10으로 증가함에 따라서 $As^{3+}$의 흡착률은 증가하는 것으로 나타났다. 한편, $Cr^{6+}$는 감소를 나타냈다. 본 연구 결과를 통해 순환골재 및 순환골재/제강슬래그 조합은 중금속($Cr^{6+}$, $As^{3+}$)을 효율적으로 제거할 수 있는 흡착제로 판단된다.

• 한국자기학회지
• /
• 제20권6호
• /
• pp.207-211
• /
• 2010

우리는 증기전달법(vapor transport method)으로 성장된 $Cr_5S_6$ 단결정의 자기저항 효과를 연구하였다. 상온에서의 X-선 회절 (X-ray diffraction) 연구는 삼방구조(trigonal structure)를 가지는 단결정의 상 형성을 보여주었다. 5 K~400 K 온도영역에서 온도의 함수로 자기장(0.1 T, 5 T)을 걸어주면서 자화를 측정하였다. 자화의 온도의존성 결과로부터 $Cr_5S_6$의 두 가지 상태변화를 확인 할 수 있었다. 첫 번째는 150 K 근처에서 반강자성에서 준강자성으로의 전이가 일어나고, 두 번째는 준강자성에서 상자성으로의 전이가 300 K 근처에서 일어난다. 0 T와 5 T의 자기장에서 측정한 온도에 따른 저항의 변화는 150 K 근처에서 반강자성-준강자성 전이를 보여주면서 금속성을 보여주었다. 자기장의 변화에 따른 자화의 변화를 고정된 온도(100 K, 150 K, 200 K, 그리고 300 K)에서 측정하였다. 200 K과 300 K에서는 M-H 이력 현상을 잘 보여주는 반면에, 100 K과 150 K에서는 이력 현상을 보여주지 않았다. 150 K, 즉 반강자성 전이온도에서 $Cr_5S_6$는 5 T의 자기장 하에서 약 -2%의 음의 자기저항(magnetoresistance)이 관찰되었다.

• 대한화학회지
• /
• 제25권4호
• /
• pp.270-274
• /
• 1981

Al(III)과 Cr(III)을 여러 양이온과 음이온의 공존하에서 가리움제를 사용하지 않고 Bismark Brown R{4,4'[(4-methyl-1,3-phenylene)bis(azo)]-bis(6-methyl-1,3-benzenediamine)dihydrochloride)을 사용하여 정량하였다. 그러나 타르타르산과 시트르산이 공존하면 방해하였다. Al(III)과 Cr(III)은 같은 파장에서 최대흡광도를 나타내므로 Cr(III)을 Cr(VI)으로 산화시키면 Al(III)과 Cr(III)을 선택적으로 정량할 수 있었다.

• 소성∙가공
• /
• 제26권6호
• /
• pp.356-364
• /
• 2017

In this study, submerged arc cladded Fe-Cr-Ni-Mo-CuWNbV-C stainless steels containing various Cr contents between 11.2 wt.% and 16.7 wt.% were prepared with fixed C content at about 0.14 wt.%. Using these alloys, changes in microstructure, tensile property, and thermal fatigue property were investigated. Phase fraction of delta-ferrite was increased gradually with increasing Cr content. However, tensile strength, hardness, and thermal fatigue resistance appeared to be decreased. When the microstructure of delta-ferrite was observed, it was revealed that the mesh structure retained up to about 15% Cr content. Although thermal fatigue resistance was almost the same for Cr contents between 11.0 and 14.5 wt.%, it was significantly decreased at higher Cr contents. This was evident from mean value of crack lengths of 10 largest ones. Evaluation of thermal fatigue resistance on alloys with various Cr contents revealed the following important results. First, the reproducibility of ranking test was excellent regardless of the number of cycles. Second, thermal fatigue resistance was increased in proportion to true tensile fracture strength values of overlay materials. Finally, the number of thermal fatigue cracks per unit length was increased with increasing true tensile fracture strength.

• 한국표면공학회지
• /
• 제40권6호
• /
• pp.279-282
• /
• 2007

Cr-Mo-Si-C-N coatings were deposited on steel and Si wafer by a hybrid system of AIP and sputtering techniques using Cr, Mo and Si target in $Ar/N_2/CH_4$ gaseous mixture. Instrumental analyses of XRD and XPS revealed that the Cr-Mo-Si-C-N coatings must be a composite consisting of fine(Cr, Mo and Si)(C and N) crystallites and amorphous $Si_3N_4$ and SiC. The hardness value of Cr-Mo-Si-C-N coatings significantly increased from 41 GPa of Cr-Mo-C-N coatings to about 53 GPa with Si content of 9.3 at.% due to the refinement of (Cr, Mo and Si)(C and N) crystallites and the composite microstructure characteristics. A systematic investigation of the microstructures and mechanical properties of Cr-Mo-Si-C-N coatings prepared with various Si contents is reported in this paper.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.154-164
• /
• 2003

This paper has applied a simple model to the mass transfer mechanism of Cr(VI) with crownether in a batch-type, supported liquid membrane module. Concentration at pH 3 are as follows : 0.012 kmol/$m^3{\le}$18-crown-6${\le}$0.036 kmol/$m^3$ and 20 g/$m^3{\le}$ Cr(VI)${\le}$500 g/$m^3$. The measured values of forward- and backward-reaction rate constants between Cr(VI) and 18-crown-6 were used to simulate the model with the mass conservation equation and associated boundary conditions. Comparison between the experimental and simulated facilitated factor of Cr(VI) transport led to classification of reaction regions.

• 한국표면공학회지
• /
• 제24권4호
• /
• pp.222-229
• /
• 1991

The oxidation behavior of Ni-6wt.% Cr alloys with various concentration of alumina dispersions(5vol.% 10vol.%) was determined at 1000 and 110$0^{\circ}C$ in oxygen of 1 atm. pressure. Some general observations were ascertained. These include: (a) the addition of alumina dispersoids significantly increased the oxidation resistance of Ni-6wt.% Cr alloy; (b) the rate of oxidation was distinctly decreased as a function of the volume percent of oxide dispersion; and (c) the presence of alumina dispersions promoted the formation of continous, protective Cr2O3 layer at 6 wt.% Cr.