• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.295-303
• /
• 2015

본 논문은 해저터널 시공 및 운영 시 발생되는 돌발용수 및 이상누수에 의한 사고에 대비하기 위한 해저터널 급속차폐시스템의 Inflater 분할구조에 따른 터널 내 차수효율에 대한 실험적 연구이다. 해저터널 특성상 해수 유입 또는 지하수 유입, 호우로 인한 침수 등 물과 관련된 피해에 대한 방호시스템은 필수적이다. 이 연구에서는 이러한 급속차폐를 위해 고안된 Inflater 구조에 대하여 형태 및 분할에 따른 차폐능력, 누수량, 수압 그리고 축방향 변위 등을 연구하기 위하여 27:1 축소율을 적용한 실내모형을 다양한 Inflater 분할구조별로 실시하였다. 연구결과에 의하면 2분할 Inflater 구조인 경우가 다른 분할에 비해 시간당 누수량 및 축방향 변위가 낮아 차폐능력이 좋은 것으로 나타났다. 이러한 결과는 해저터널의 제원에 따라 다소 차이는 있을 것으로 예측되나 기본적으로 차폐시스템 설계 및 개발기술 발전에 매우 유용하게 활용될 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.776-782
• /
• 2002

The microstructure, V-Ι characteristics, and stability of ZnO-P $r_{6}$ $O_{11}$ CoO-C $r_2$ $O_3$- $Y_2$ $O_3$-based varistor ceramics were investigated with cooling rate in the range of 2~8$^{\circ}C$/min. The cooling rate relatively weakly affected the microstructure, the varistor voltage, and the leakage current in the V-Ι characteristics. But the nonlinear exponent relatively strongly affected by cooling rate. The cooling rate also greatly affected the stability of V-Ιand dielectric characteristics for DC accelerated aging stress. On the whole, the varistors cooled with 4$^{\circ}C$/fin exhibited the highest performance in the densification, nonlinearity, and stability. Especially, they exhibited a high stability, in which the variation rate of the varistor voltage( $V_{1㎃}$), the nonlinear exponent($\alpha$), and the dissipation factor(tan $\delta$) is -1.4%, -4.9%, and ＋60.0%, respectively, under DC accelerated aging stress such as 0.95 $V_{1㎃}$15$0^{\circ}C$/12 h)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.172-174
• /
• 1996

In this paper, the characteristics of single-phase induction motors is studied using TDFE(Time Domain Finite Element) analysis. The magnetic field equation from the Maxwell's equations is solved using 2-Dimensional TDFE method, and the circuit equations from the stator and rotor are solved simultaneously. The 3-D effects, which are the end-leakage reactance and the resistance of end-rings are considered in 2-D combined equations. The proposed method is applied to the commercial single-phase induction motor. The calculated waveforms of the currents shows a good agreement with the measured ones.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권5호
• /
• pp.345-349
• /
• 2000

To easily separate chitosanoligosaccharides by size exclusion, an coencapsulating technology of substrate and enzyme was developed. The membrane was composed of alginate and a divalent cation such as calcium. Chitosan and chitosanase were enveloped in this membrane and the product released to medium by size exclusion. The capsule was stabilized in a 2% acetic acid solution (pH 5.0) containing 0.145 M CaCO$_3$. The leakage of substrate caused by the agitation speed was controlled by increasing alginate and CaCO$_3$concentrations. The lower limit of the alginate concentration and the agitation speed were 0.5% and 49rpm, respectively. Membrane thickness and capsule diameter were 10$\mu\textrm{m}$ and 2.5mm, respectively. By TLC analysis, the composition of chitosanoligosaccharides were mainly 3-6 mers. The molecular weight distribution of the released oligosaccharides ranged from 262 to 3624 Da by GPC.

• 한국산림과학회지
• /
• 제107권4호
• /
• pp.351-360
• /
• 2018

본 연구는 이산화탄소를 인위적으로 주입하여 주입구로부터의 거리와 이산화탄소 플럭스에 따른 소나무와 굴참나무 묘목의 엽록소 함량과 생장반응을 살펴보고자 실행하였다. 이를 위하여 음성 EIT 시험지에서 2년생 소나무와 1년생 굴참나무 묘목을 2015년 5월에 식재하였으며, 2016년 6월 1일부터 30일까지 $6L\;min^{-1}$의 속도로 2.5 m 깊이의 토양에 이산화탄소를 주입하였다. 2016년 7월 중순 경에 엽록소 함량을 분석하였고, 2016년 5월과 11월에 근원경, 수고, 생물량을 측정하였다. 소나무 묘목의 엽록소 함량은 이산화탄소 플럭스와 유의한 관계를 보이지 않은 반면에 굴참나무 묘목의 엽록소 함량은 이산화탄소 플럭스의 증가에 따라 유의한 음의 상관관계(P<0.05)를 보였다. 또한, 근원경과 수고 생장률은 두 수종 모두 이산화탄소 인위누출 처리구의 이산화탄소 누출구로부터 5 m 이내에서 유의한 차이를 보였다. 특히, 두 수종의 근원경 및 소나무 묘목의 수고 생장률은 누출구에 가까워질수록 유의하게 증가하였지만, 굴참나무 묘목의 수고 생장률은 유의하게 감소하는 것으로 나타났다. ${\Delta}R/S$율은 지중 이산화탄소 농도가 증가할수록 두 수종 모두 증가하는 것으로 나타나 상대적으로 지하부로의 탄소 분배량이 촉진되는 것으로 사료된다. 본 연구결과는 향후 지중 저장된 이산화탄소의 누출에 따른 수종별 생리 생장 반응과 이를 이용한 누출감지 모니터링에 필요한 자료로 활용될 수 있을 것이다.

• 식품과학과 산업
• /
• 제50권2호
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.6-11
• /
• 2008

In this study, we investigated effects of hydrogen annealing (HA) and plasma nitridation (PN) applied in order to improve $Si/SiO_2$ interface characteristics of TiN metal gate. In result, HA and PN showed a positive effect decreasing number of interface state $(N_{it})$ respectively. After FN stress for verifying reliability, however, we identified rapid increase of $N_{it}$ for TiN gate with HA, which is attributed to hydrogen related to a change of $Si/SiO_2$ interface characteristic. In contrast to HA, PN showed an improved Nit and gate oxide leakage characteristic due to several possible effects, such as blocking of Chlorine (Cl) diffusion and prevention of thermal reaction between TiN and $SiO_2$.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.640-646
• /
• 2001

The electrical stability for DC stress of Pr$_{6}$O$_{11}$-based ZnO varistos consisting of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$-based ceramics were investigated with sintering temperature in the range of 1325~1345$^{\circ}C$. A the sintering temperature is raised, the nonlinear exponent of varistors was decreased, whereas the stability was markedly improved. The density of ceramics was found to greatly affect the electrical stability for DC stress. The varistors sintered at 13$25^{\circ}C$ were completely degraded because of thermal runaway attributing to low density. The varistors sintered at 1335$^{\circ}C$ exhibited the highest nonlinearity, with a nonlinear exponent of 70.53 and a leakage current of 1.92$\mu$A, whereas they did not exhibit relatively high stability. On the contrary, the varistors sintered at >134$0^{\circ}C$ exhibited not only a high nonlinearity marking the nonlinear exponent above 50 and the leakage current below 3$\mu$A, but also a high stability marking the variation rate of the varistor voltage below 2%, even under DC stress such as (0.80V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85V$_{1mA}$/115$^{\circ}C$/12h)+(0.90V$_{1mA}$/12$0^{\circ}C$/12h)+(0.95V$_{1mA}$/1$25^{\circ}C$/12h)+(0.95V$_{1mA}$/15$0^{\circ}C$/12h). In particular, ti was found that the varistors sintered at 134$0^{\circ}C$ were more nonlinear and more stable, compared with that of 1345$^{\circ}C$.EX>.}C$.EX>.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.949-955
• /
• 2010

Nd and Ti co-doped bismuth ferrite $(Bi_{1-x}Nd_x)(Fe_{1-y}Ti_y)O_3$ (x, y = 0, 0.05, 0.1, 0.2) ceramics and thin films were synthesized through the conventional mixed-oxide process and pulsed laser deposition (PLD), respectively. Nd and Ti co-doping effect was examined with emphasis on how these impurities affect phase formation behavior as there could be the improvement in leakage current problems often associated with multiferroic $BiFeO_3$ (BFO) thin films. The lattice constants of BFO ceramics decreased with Nd doping concentration up to 10mol%, while they further decreased with Nd and Ti co-doping to about 20%. BFO thin films obtained by the PLD process revealed random polycrystalline structure. Similar to bulk BFO ceramic, Nd and Ti co-doping effectively suppressed the formation of unwanted secondary phase and thus stabilized the perovskite phase in BFO thin films.

• Restorative Dentistry and Endodontics
• /
• 제14권2호
• /
• pp.20-29
• /
• 1989

발거된 소구치 80개의 협, 설면에 교합면쪽의 법량질변연과 치은쪽의 상아질변연을 부여한 제 5급와동을 형성한 후, 각 20개씩 4개의 군으로 나누었다. 각 군별로 초미세입자형 광중합 복합레진과 법랑질접착체인 Durafill$^{(R)}$-Durafill bond$^{(R)}$, Bisfil M$^{(R)}$-Resin bond$^{(R)}$, 초미세입자형 복합레진과 상아질 접착제인 Silux$^{(R)}$-Scotchbond$^{(R)}$ 그리고 글라스 아이오노머 시멘트인 Fuji ionomer$^{(R)}$로 충전하였다. 온도변화는 $40^{\circ}C$와 $60^{\circ}C$의 2% methylene blue 용액에 각각 30초간 침척을 반복시킨 후 $37^{\circ}C$ 동용액에 24시간 경과시켜 법랑질변연부와 상아질변연부에서의 색소침투를 관찰하므로써 변연누출의 정도률 비교한 바 다움과 같은 결과를 얻었다. 1. 법랑질변연부에서 Durafill$^{(R)}$-Durafill bond$^{(R)}$, Bisfil M$^{(R)}$-Resin bond$^{(R)}$ 및 Silux$^{(R)}$-Scotchbond$^{(R)}$군 상호간에는 대차가 없었으나(P>0.05), 3군 공히 Fuji ionomer$^{(R)}$군보다는 변연누출이 적었다(P<0.01). 2. 상아질변연부에서는 Silux$^{(R)}$-Scotchbond$^{(R)}$군과 Fuji ionomer$^{(R)}$군이 각각 Durafill$^{(R)}$-Durafill bond$^{(R)}$군 및 Bisfil M$^{(R)}$-Resin bond$^{(R)}$군에 비해 변연누출이 적었다(P<0.01). 3. 충전한 모든군의 5급 와동에서 법랑질변연부가 상아질변연부보다 변연누출이 적었다(P<0.01).